North American Petroleum By Products Suppliers and Manufacturers

JP54 / JET A1 : RUSSIAN ORIGIN First lift : 1,000,000 bbls - 2,000,000 bbls Contract QTY : up to 5,000,000 blls Price : NWE PLATTS MINUS $6/$8 FOB : ROTTERDAM / FUJAIRAH PORT/ HOUSTON COMMISSION : 50% SELLER SIDE CLOSED / 50% BUYER SIDE OPEN

KINDLY CHECK OUR OTHER POSTS FOR TTT and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT DIP & PAY PROCEDURE FOB ROTTERDAM, HOUSTON , JURONG , BUKOM , BUSAN, USLAN ZHOUSHAN, QINGDAO/ KLANG, MALINA, AL FUJAIRAH, DOHA, RAS LAFFAN, KAOHSIUNG . NAGOYA.WITH SGS REPORT. NON-NEGOTIABLE 1The Buyer Issue an ICPO, containing the seller's working procedures and Buyers Banking details, along with TSA (TANK STORAGE AGREEMENT) , Buyer Certificate of Incorporation, Company Profile (CP) and International Passport Copy. 2. Seller issues ICC Warning Letter and Commercial Invoice of products in tank at port. Buyer signs and returns commercial invoice with acceptance letter stating to adhere to Seller procedure. 3. The Seller visits Buyer Tank Farm Office with a copy of the SGS Report and shows SGS report strictly to the Buyer's Tank Farm Company only to verify the SGS Report Quality and Quantity with SGS office. 4. After confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company, the Seller pays Buyer's Tank for the first 3 days and the Buyer pays his Tank Company for 3 Days after his Tank Company receives payment from the Seller Company. 5. Buyer Tank Farm provides 6 days TSR. 6. Seller sends injection schedule and Buyer returns signed and sealed Injection Schedule. 7. Seller commences injection of the product to Buyer Tank and completes the injection. 8. The Seller issues the following POP documents to the Buyer; the Buyer performs a Dip Test on the product if needed and makes payment for the total value of the product injected into the tank via MT103/TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Tank storage receipt with full GPS coordinates (c) Product Certificate of Origin (d) Product injection report at shore tank (e) Unconditional dip test authorization letter (f) NCNDA-IMFPA agreement (g) Q&A (h) Authorization to sell and collect 9.Seller sends payment to all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and Authorized by Seller's Bank and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement between the buyer and seller. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2

KINDLY CHECK OUR OTHER POSTS FOR DIP PAY and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK TO TANK-STANDARD PROCEDURE AGREEMENT (TTT) 1. Buyer confirms Soft Offer and issues an official Irrevocable Corporate Purchase Order (ICPO) along with company registration and Valid Passport Copy. CIS on buyer's company letterhead along with TANK STORAGE AGREEMENT (TSA) 2. Seller issues commercial invoice of products in tank at port, buyer signs and returns commercial invoice with acceptance letter stating to adhere to seller procedure 3. Seller provides buyer with the below listed PPOP: A. Tank to Tank Injection agreement (TTIA) B. Product Passport (product analysis report) C. Irrevocable Commitment Letter to Supplier D. Statement of Product Availability 4. Buyer returns signed Tank to Tank Injection agreement (TTIA) with ATV to verify from buyer's Tank Farm which means buyer has storage facilities in favor of buyer to receive product 5. Seller issues injection schedule to sign and seal from buyer Tank Farm and Seller commence injection of the product into buyer's tank. 6. The seller issues the following POP documents to the buyer; the buyer performs a Dip test on the product if needed and makes payment for the total value of the product injected into the tank via MT103 -TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Product Certificate of Origin (c) Tank storage receipt with full GPS coordinates (d) Unconditional Dip Test authorization letter (e) Authorization to sell and collect (f) NCNDA-IMFPA agreement (g) Q&A (i) Company Registration Certificate 7. (NCNDA/IMFPA) will be signed, within 24 hours of giving POP document 8. Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 9. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2

KINDLY CHECK OUR OTHER POSTS FOR TTT and DIP & PAY JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK-TO-VESSELS PROCEDURE AGREEMENT (TTV) 1. Buyer issues ICPO containing the seller's procedure with banking details and scanned copy of buyer's passport along with Charter Party Agreement (CPA) from buyer's Logistic Company. 2. Seller issues Commercial Invoice (Cl) for the available products in Tank at the Port, for Buyer's review and endorsement and return within 3 international working days 3. Seller issue to buyer Tank-To-Vessel Injection Agreement (TTVIA) to be endorsed by both Seller, Buyer and Buyer's shipping Company . 4. Seller issue injection schedule to sign and seal from buyer's Logistics Shipping Company and Seller commence injection of the product. 5. Upon confirmation of Sign and seal Injection schedule from buyer's logistics company with (ATV Letter). Seller release the below POP documents directly to end buyer's secure email. a) Fresh SGS (Not Older Than 48 hrs.) b) Legalized Commercial Invoice. c) Commitment to Supply. d) Injectio n Report e) ATS -Authorization to Sell & Collect f) Authorization to Verify (ATV) g)Dip Test Authorization (OTA) h) Export License. j)Statement of product Availability j) Tank Storage Receipt (TSR) With barcode and GPS Coordinate k) NCNDA/IMFPA 6. The Buyer Conducts Dip Test in the product in the seller's reservoir. 7. Buyer provide Authorization to Inject (ATI) from buyer Logistic Company to enable seller commence Injection of Product into the Buyer's Vessel Tank 8. Within Twenty-Four (24) Hours upon completion of the Injection, buyer make payment for the total cost of the product injected into buyer's Vessel by TT wire transfer to seller's nominated bank account. 9. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and signs further contracts after successful Transaction Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2

Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western Europe, mazut is blended or broken down, with the end product being diesel. Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces. Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.

FOB ROTTERDAM & FOB HOUSTON NON-SANCTIONED ORIGIN FUEL PRODUCT JET FUEL A1 EN590 10PPM TRIAL QTY 2,000,000 BBL 100,000 MT CONTRACT (MAX/M X 12M) 8,000,000 BBL 800,000 MT PRICE US$88 PER BBL US$570 PER MT NON-NEGOTIABLE PROCEDURE FOR FOB TANK TO TANK (ACTIVE TSR) 1. The buyer issue ICPO with his international passport copy (data page), CIS and company license to the seller. 2. The seller issue commercial invoice (CI) for the available quantity in seller storage tank to the buyer, buyer endorse commercial invoice and return the CI with buyer signed tank storage agreement. 3. Seller proceeds to verify the buyer's tank storage agreement to ensure seller approval of the tank storage agreement through ATV, NCNDA/IMFPA signed and seal by all intermediaries connected in the transaction. 4. The seller issues the partial pop documents as below and sends to the buyer. a. Commitment to supply b. Certificate of origin c. Authorization to verify (ATV) d. Tank to tank injection agreement (TTTIA) e. Unconditional DTA f. Fresh SGS (not older than 48 hours) g. Tank storage agreement (TSR) h. ATS- authorization to sell and collect i. Injection report 5. The buyer conduct's DIP test in the seller reservoir and provides tank details to the seller, to commence injection of product into the buyer's tank. 6. Within twenty-four (24) hours, buyer issues 100% TT wire transfer payment to the seller, the seller transfers the title ownership to the buyer. 7. Serious direct buyers only, Please Available 24/7

We can supply the below (other fuel products available) JET FUEL (JET A1) US ORIGIN 1,000,000 BBL SPOT 2,000,000 BBL Ã?? 12 MONTH FOB RTM OR HST TANK TO TANK

Jet A 1 Fuel

All Fuels are NON-SANCTIONED from the USA, Europe, Asia, and the Middle East. We offer multiple procedures - all safe to fit the Buyers Needs Our Supplier, Resellers, Refineries are all vetted and verified. For Intermediaries: Buyer needs to have a KYC/CIS (Know Your Customer/Customer Information Sheet) together with an LOI. We do not share procedures or pricing without those at the minimum. Buyers must have POF, Logistics, and the ability to transact immediately. TSA/CPA to get started with and TSR/Q88 once injection to commence. FOB Ports are: Rotterdam, Houston, Fujairah, Singapore CIF Ports are: Any safe world port (ASWP) TTO: with IMO and POP There are no cheap fuels, however we do have fuels at discount off PLATTS. There are NO UPFRONT FEES for any fuel transactions. CIF will require an SBLC, however you will get PPOP upon Pre-Advise 799 FOB, your logistics needs to be registered with the Port Authority and verifiable (with ATV) Trader, Reseller are welcome, but you still need to show some proof of funds.

Jet A1 Fuel FOB PRICE Aviation Turbine Fuel (JPA1) Trial Quantity: 2,000,000 BBLS Contract Quantity: 10,000,000 BBLS Delivery: Tank to Tank Origin: Kazakhstan Loading Port: Rotterdam Inspection: SGS Payment: MT 103 Swift Bank to Bank on Invoice FOB TTT PROCEDURE 1. The Buyer Issue an ICPO. Containing the seller's work procedures and Banking Details along with TSA (TANK STORAGE AGREEMENT), Buyer Certificate of incorporation, Company Profile (CP) and International Passport Copy of the CEO. 2. Seller issues ICC Warning Letter and Commercial Invoice (CI) of products in tank at port, buyer signs and returns the documents with acceptance and commitment letter stating to adhere to seller procedure. 3. The seller issues a copy of the SGS Report strictly JUST to the buyer's Tank farm Company only to verify the SGS Report. 4. after confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company. The Buyer pays his Tank Company for 5 Days TSR and sends his TSR to the Seller. All Parties must sign NCNDA and IMFPA for endorsements. 5. The seller issues the following POP documents to the buyer; (a) SGS report for quality and quantity not older than 48 hours (b) Product Certificate of Origin (c) Product injection report (d) Tank storage receipt with full GPS coordinates (e) Unconditional dip test authorization letter (f) Authorization to sell and collect (i)Q&A 6. After verification of the documents, the injection will be commenced and after injection the buyer makes payment for the total value of the product injected into the tank via MT103-TT. 7. After receiving confirmation of Buyer Payment, the seller immediately transfer the title ownership to the buyer. 8. Seller sends payment of all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement t between the buyer and seller.

Fuel such as Aviation Fuel, Diesel (EN590, 10ppm, 50ppm, 500ppm), Fuel oil, LNG, LPG, Jet Fuel,

We have 4 Million barrels of Jet A1 available. The Procedure is CIF without an instrument. A BCL is required instead and a SGS at the loading port. A ship is loaded and travels to your port. Once docked an SGS can be performed again by Buyer. Payment for product is then made.

We are supplier of AVIATION TURBINE JET A1, origin: KAZAHKSTAN. Goods can be exported worldwide and ready to load on board as soon as requested. - Shipping terms : CIF incoterms 2020 - Available quantity : Quantity on order - Contract : 01 month trial (Spot deal) + 12 months - Price : USD NWE Rotterdam Platts discount per Barrel - Loading Port: Rotterdam We are looking forward to doing business with you. If further information is needed, feel free to contact with me.

I am a direct facilitator for a consortium with over 20 refineries and we can supply you with the requested amount of Jet A1 of unsanctioned origin. FOB Houston or Rotterdam and CIF. This would be on a 12 month contract after going through a trial. Before any payment is due, you'll receive a certificate of origin and other proof of product documents. I can share with you more information on procedures and process if you are interested.

Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38 degree Celsius and a freeze point maximum of -47 degree Celsius. It is widely available outside U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91, ASTM specification D1655 and IATA Guidance Material (Kerosine Type), NATO Code F-35. Our Jet Fuel A-1 specification: Minimum order: 100,000 MT=1 million barrels CIF to your destination. Price: $85/ barrel USD. Client needs to send LOI, BCL, and his TSA to initiate a transaction. Limited Time Special Send in your LOI from now to February 25 entitled you to a special price of $75/barrel USD

Origin Kazakhstan