RANGE 15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORM SEAMLESS / ERW / WELDED IN ROUND & SQUARE . Nickel Alloy ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 ) ASTM / ASME SB 163 UNS 2201 (NICKEL 201 ), ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 ) ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 ), ASTM / ASME SB 704/705 UNS 8825 INCONEL (825) ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 ) ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 ), ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625) ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 ) Copper Alloy ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500. ASTM / ASME SB 466 UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30)
We are the owners of the 337 grams 0,025 mm Nickel wire (99,98%, ref. Alfa-Aesar 40672). 1 gram of this wire = 227 m lenght.
Nickel Wire 0.025 mm diameter, 99.9016% purity sold in case of 26 bobbins. Total net weight 5,169g. IGAS Research certified. Minimum order quantity: 1 million meters. Ships from Dubai.
OD: 10 - 325mm WT: 1.0 - 30mm Length: up to 12m Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries. Process method: Cold drawn, Cold rolling Finishing: Heat treatment, annealed, acid washing, manual and mechanical Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe 3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe .15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10 Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163 C Cr Ni Ti Al Fe Al+Ti Grain 0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy is widely used in the heat treating industry. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities. Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension Dia. 6 ~ 200 mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Nickel carbonate basic for electroplating, catalysts, etc.
NP1 nickel wire on bobbins. 30 rolls between 250gr/55000 meters to 350gr/77000 meters. MOQ is set at 1 roll equal to 55000 meters. FOB origin Price variable depending on quantity ordered Chemical analysis available on request. Inspection available upon receipt of letter-of-intent
Nickle wire Origin Russia 6 million metre nickle wire Available in Dubai FOB Dubai
Origin: USA, Egypt, Germany Quantity: 6 million metre of Nickel Wire. Available now - trial 1000 meters Price $3.5 per metre Fob Dubai. If you are interested, please send us your end buyer's LOI to
On a nickel wire of Russia Moscow-0.025 of KT-NP2 party No. 1207/55000/1 The net weight 27 541.0g, length is 6 259 318, number of coils- 120 pieces. Certificate of Origin issued in the Russian Federation No: 2618909 Date: 2023-09-10
Products Description High-porosity metal nickel fiber felt is a patented product, which is a three-dimensional nickel felt made of metal nickel fiber developed in chemical and metallurgical processes. The purity of nickel fiber felt is 99.5%. It is a new material with light weight, good flexibility, adjustable porosity, and felt thickness. Metallic nickel felt is made of micron-sized pure nickel fiber in accordance with international technical standards, through a special felting process and ultra-high temperature vacuum sintering process. Compared with nickel mesh or nickel powder sintered plate, nickel fiber felt has a good three-dimensional network porous structure, high porosity, large specific surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, good heat dissipation, and current density high, low voltage, stable performance, long life, and other advantages. Widely used in fuel cells, military industry, aerospace, civil, medical, and other industries. Especially hydrogen fuel cell diffusion media: anode diffusion layer (GDL) for proton exchange membrane (PEM) water electrolysis. Products parameters Brand: TOPTITECH Size: Customized on request Thickness: 0.2mm-2mm common thickness (0.25, 0.4, 0.5,0.6, 0.8, 1.0mm) Porosity: 60-70% (can be customized upon request) Shape(can be customized)ï¼? polygon, round, ring, disc, etc. Color: light gray Product Features 1. Good electrical conductivity 2. High mechanical strength 3. Good chemical stability 4. Strong corrosion resistance 5. Large specific surface area The fibers in the sintered fiber mat are overlapped with each other, and each fiber is welded with several fibers. The overlapping points are in a slightly fused state, and the entire fiber mat forms a complete conductive network with excellent electrical properties. And it also has a large specific surface area, which is mainly determined by the characteristics of the preparation process of the nickel fiber felt. The drawn fiber itself has a large surface area, and the fiber is laid into a net to form a network structure that is evenly overlapped with each other. Manufacturing flow Nickel wire Cluster drawing Nickel fiber Fiber shear Air-laid Sintering Nickel fiber felt Application fields Filter material Battery electrode material Heat exchange and adsorption materials
Nickel wire NP1: Below is the detailed information of 1000 kg of nickel wire, It is Price: US$ 21000 per kg Quantity: 1000 kg Shipping method: Free on Board (FOB) or CIF (CIF) or pick up at the warehouse.
Nickle Wire # BATCH 3: 2,255,654 Meter Quantity: 9,925 grams (2,255,654 meter). One gram = 227.27 meters Spot Price: 113 million USD (USD50 per meter) Market Value: 113 Euro per meter. Nickle Wire average thickness: 0,025mm Purity: 99.90 % (Not radioactive and not toxic). Quality: LC-Ni99,6 Location: Products are stored at secured warehouse at Switzerland Delivery term: FOB or CIF Payment Method: Standby Letter of Credit (SBLC) From Major Bank to Guarantee Payment or T/T by Wire Transfer. Upon Seller Receives Payment By T/T or by SBLC, The Title of Nickle Wire Will Be Exchanged and The Bill of Lading Wil Be Transferred to Buyer's Name.
I have 5 Batches of Nickle Wire Available for sale. Please read on for details. Quantity: 20,595 grams (4,680,625 meter). One gram = 227.27 meters Package: Packed in 2 boxes each 15kg. Each box contained 75 bobbins with different weights. Spot Price: 187 million USD (40 USD per meter) Market Value: 80 Euro per meter. Nickle Wire average thickness: 0,025mm Purity: 99.83% (Not radioactive and not toxic). Total Impurity: 1699,65 ppm Quality: LC-Ni99,6 material number 2.4061 Location: Products are stored at secured warehouse at Switzerland. Delivery term: FOB or CIF Payment Method: Standby Letter of Credit (SBLC) From Major Bank to Guarantee Payment or T/T by Wire Transfer. Upon Seller Receives Payment By T/T or by SBLC, The Title of Nickle Wire Will Be Exchanged and The Bill of Lading Will Be Transferred to Buyer's Name.
For Sale: Ultra Pure Nickel Wire NP1. Purity: 99.98 %. Diameter: 0.025mm. Qty: 6700 meters. The product is in Finland and the SGS Finland quality certificate can be delivered. We are asking for an offer / meter. Delivery and payment terms is negotiable.
China Grade:N4,N6. America Grade:UNS N02201,UNSN02201. China Standard:GB/T2054 America Standard:ASTM B162 Supply status: annealed state (M), hard state (Y). Production process: cold rolling, hot rolling. Specification: (1) the thickness of the cold-rolled plate 0.8-6.0mm width 300-1300mm length 500-4000mm sanding, pickling surface. (2)Thickness of hot rolled plate 3.0-70mm width 300-2500mm length 500-8000mm matte, polished, frosted surface. Product characteristics: Pure nickel material has good corrosion resistance in the NaOH solution at any concentration and temperature and in the molten state of NaOH above 400C. Pure nickel materials have good corrosion resistance to Na2O2. Na2CO3, NaHCO3, and an alkaline solution or molten liquid containing KNO3. Main uses: for manufacturing chemical equipment such as pipe, heat exchanger, evaporator, heater, reactor, etc.; target materials for various coating; electrodes, etc.
Product characteristics: high temperature and high strength, strong plasticity. Main uses: industrial electric furnace, household appliances, far infrared device. Products can be customized, welcome interested customers to come to consult
Supply status: pull hard (Y) soft (M), squeeze (R). Shape: round bar, square bar, hexagonal bar. Manufacturing process: hot rolling, hot forging, grinding light. Supply status: pull hard (Y) soft (M), squeeze (R). Shape: round bar, square bar, hexagonal bar. Manufacturing process: hot rolling, hot forging, grinding light.