OD: 10 - 325mm WT: 1.0 - 30mm Length: up to 12m Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries. Process method: Cold drawn, Cold rolling Finishing: Heat treatment, annealed, acid washing, manual and mechanical Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe 3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe .15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10 Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163 C Cr Ni Ti Al Fe Al+Ti Grain 0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy is widely used in the heat treating industry. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities. Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Titanium sheet and plate are defined with the only difference of sizes. All these products are made from titanium slabs by cold rolling or hot rolling. ASTM B265 is the most common used standard. We can also supply materials as per AMS 4911, ASTM F136 etc. Annealed materials can be furnished as descaled and sandblasted on your request. We have a rich stock of these products in CP and 6Al4V alloy, and they can be cut to any custom sizes at reasonable charge. Please contact our sales department if you have interest. Grade CP Ti Grade 5 Ti-6Al-4V Grade 6 Ti-5Al-2.5Sn Grade 7 Ti-0.2Pb Grade 9 Ti-3Al-2.5V Grade 12 Ti-0.3Mo-0.8Ni Grade 23 Ti-6Al-4V ELI Standards ASTM B265, ASME SB265, ASTM F67, ASTM F136, AMS 4911
Owing to perfection and quality oriented approach, we have carved a niche in the industry by offering Nickel Tubes. The offered nickel tube is designed and manufactured especially for efficient use in different industries. This range is demanded for its unique features like long service life, leak proof, chemical resistance and perfect finish. Our valuable customers can avail this nickel tube from us in a given time frame at competitive price. Features: â?¢ Optimum quality â?¢ Precise dimension â?¢ Reliability Other Details: Power generation Biotechnology Medical technology Oil and gas Environmental waste treatment, waste incineration Coal and Gas processing Food processing Fertilizer production Aerospace parts and components
Tantalum tube Tantalum capillary tube Tantalum tungsten alloy tube Material: RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W) size: Dia: |Õ1.0-100mm x Thick: 0.25-8.0mm x Length: 200mm-8000mm Standard: As per ASTM B521 Purity: >=99.95% or 99.99% Baoji lihua non-ferrous metals co., ltd. Is specialized in tantalum (ta) and its alloy(ta-2.5w ro5252, ta-10w ro5255) plate, sheet, foil, strip, target, tape, rod, bar, wire, tube and pipe according to astm specifications. The materials are available as ro5200, ro5252, ro5255. Standard export packing suitable for long distance international transportation.
Inconel 625,Incoloy 825,Monel 400,Monel K500. Grade:UNS N06625,UNS N08825,UNS N04400,UNS N05500. Standard:GB/T 2882. Delivery status: soft state (M), hard state (Y). Surface state: black skin state, car light state, grinding state, pickling state. Specification: outer diameter 3.18-114.3mm, wall thickness 0.5-7.11mm, length 18000mm.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
Type:� Superelastic nickel-titanium alloy Application:Medical Technique:Seamless Grade:GR9 Shape:Round Diameter:0.25-6mm Production Capacity:100000PCS/Monthly Port:Xiamen, China� Payment Terms:T/T, L/C etc.
We Titubes stock and supply titanium tubes rings bars and sheets since 2010. Now we're producing the special Huge Gr.2 Titanium Seamless tubes which can be reached as O.D600*W.T5*L4000mm according ASTM B338. It's Seamless and Huge.
