Premium metals: ultrafine copper powder (99.9998%, 50 70um), nickel wire (99.76%, 0.025mm), aluminum (98.7%) and lithium (99.5%).
Product Name : Chromium Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Chromium Nanopowder Cas No 7440-47-3 Appearance Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula Cr Product no. SCM-NM-107/22 Molar Weight 51.9 Description :- Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress. Cr Nanoparticles,Cr Nanoparticle,Cr Nanoparticle,Cr Nanoparticles,Cr Nanoparticles.Chromium (Cr) Nanoparticles should be gently placed and avoided violent vibration and friction. Chromium (Cr) Nanoparticles should be prevented from moisture, heat, impact and sunlight. The user must be a professional (This person must know how to use Chromium (Cr) Nanoparticles.) Related Products: Chromium Cr Powder, 99.5% (3, 5, 10, 30, 45um) Chromium Powder / Cr Powder (Cr, 99.5%, 40um, metal basis) Chromium Nanopowder / Nanoparticle (Cr, 99.9%, 35-45 nm, metal basis) Fe-Cr-Co Alloy Nanopowder / Nanoparticle, 99.9%, 40 nm-100nm, Fe:Cr:Co/64:25:11 Ni-Cr-Co Nanopowder / Nanoparticle, 99.9%,
Product Name : Boron Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Boron Nanopowder Cas No 7440-42-8 Appearance Black Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula B Product no. SCM-NM-102/22 Molar Weight N/A Description :- Boron is a chemical element with the symbol B and atomic number 5. In its crystalline form it is a brittle, dark, lustrous metalloid; in its amorphous form it is a brown powder. As the lightest element of the boron group it has three valence electrons for forming covalent bonds, resulting in many compounds such as boric acid, the mineral sodium borate, and the ultra-hard crystals of boron carbide and boron nitride. Boron is synthesized entirely by cosmic ray spallation and supernovae and not by stellar nucleosynthesis, so it is a low-abundance element in the Solar System and in the Earth's crust. It constitutes about 0.001 percent by weight of Earth's crust. It is concentrated on Earth by the water-solubility of its more common naturally occurring compounds, the borate minerals. These are mined industrially as evaporites, such as borax and kernite. The largest known deposits are in Turkey, the largest producer of boron minerals. Elemental boron is a metalloid that is found in small amounts in meteoroids but chemically uncombined boron is not otherwise found naturally on Earth. Industrially, the very pure element is produced with difficulty because of contamination by carbon or other elements that resist removal. Several allotropes exist: amorphous boron is a brown powder; crystalline boron is silvery to black, extremely hard (about 9.5 on the Mohs scale), and a poor electrical conductor at room temperature. The primary use of the element itself is as boron filaments with applications similar to carbon fibers in some high-strength materials. Related Product: Boron Nanoparticles (B, 99.9+%, 100nm) Boron Nanoparticles (B, 99.5+%, 500nm) Boron Nanopowder / Nanoparticles (B, 92%, 1-2um) Boron MicroPowder (B, 1-2um, 99%) Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer requirements and also accept customization in various parameterts.
Product Name : Ti2AIN MAXene Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Ti2AIN MAXene Powder Cas No 60317-94-4 Appearance Black Purity 98% APS N/A Formula Ti2AIN Product no. SCM-MX-120/22 Related Product: Ti2C MXene Powder, Ti2Cdc MAX Phase Powder Ti2GaC MAX Phase Powder Ti2GaN MAX Phase Powder Ti2GeC MAX Phase Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron Size as per the customer requirements and also accept customization in various parameterts.
Product Name : Mn2GaC MAX Phase Powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Mn2GaC MAX Phase Powder Cas No N/A Appreance Gray to Black Purity 99% APS 40-50m Formula Mn2GaC Product no. SCM-MX-109/22 Related Product: Mn3AlC2 MAXene Powder Mo2C MXene Powder Mo2Ga2C MAXene Powder Mo2GaC MAX Phase Powder Mo2Ti2AIC3 MAXene Powder Related Information :- Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron Size as per the customer s requirements and also accept customization in various parameterts.
Mercury , urea, labsa ,sles and chemical products.
Automobile spare parts, iron scrap, ss, ms, aluminum, normal iron, onion different grades, plantation, spices like chilly powder, turmeric..
All types of petro chemicals, mineral metals & scraps, food & edible oils, agro chemical, minerals/metals, urea fertilizer, jet fuel, d2 diesel oi, dap, industrial bitumen, crude oil, metal nuggets.Intermediary
Cobalt powder 1kG per package
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
Product Introduction Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength, and other characteristics of different filter materials to develop filter products suitable for users. When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, by backwashing or backflushing the filter element under a specific reverse pressure, the filter element can be cleaned and reused. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 microns 5 microns 10 microns 20 microns 30 microns 50 microns 80 microns 100 microns
Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength and other characteristics of different filter materials to develop filter products suitable for users. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 micron 5 micron 10 micron 20 micron 30 micron 50 micron 80 micron 100 micron Features Strong resistance to corrosion An inert metal with exceptional corrosion resistance is titanium. Strong alkali and strong acid media can be filtered using the titanium metal rod filter element. It has a wide range of applications in the chemical industry and in the filtering of the pharmaceutical industry's organic lysozyme production process. Good tolerance to high temperatures The titanium filter element has a high temperature resistance that goes up to 300C. In operational situations with high temperatures, this function is frequently used. The temperature resistance of the filter element made of polymer materials is normally limited to 50 C. The support and filter membranes will alter if the temperature goes beyond 50 C. It is frequently employed in the filtration of high-temperature liquids and steam filtration (steam filtration in fermentation processes), despite having a significant accuracy variance. Superior mechanical qualities With external pressure of 20 kg and internal pressure of 10 kg of destructive force, the titanium rod filter element has strong mechanical qualities and may be utilized in high pressure and quick filtration processes. The pore size of other polymer filter components will fluctuate or even break down when the external pressure is more than 0.5 MPa. Good regeneration Due to its superior corrosion resistance, high temperature resistance, and high strength performance, titanium rod filters have a good regeneration effect. There are two types of regeneration: chemical regeneration and physical regeneration treatment. Physical regeneration method: (1) Pure water recoil (2) Steam blowback (3) Ultrasonic cleaning Chemical treatment method: (1) Alkaline washing (2) pickling Applications Catalyst filtration and separation; Filtration of fluidized bed tail gas in petrochemical facilities and of high-temperature gas in the petrochemical industry; High-temperature flue gas purification in the metallurgical industry;
Product Introduction Stainless steel powder sinter filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1m-100m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:
Stainless steel powder sintered filter element is a kind of filter material, which is made of stainless steel powder sintered at high temperature. The filter element has high permeability, can effectively filter tiny particles and impurities, has high corrosion resistance and durability, and is suitable for liquid and gas filtration in various chemical, food, pharmaceutical, electronic and other industries. Product parameters Diameter: 50mm-1200mm Length: 100mm-2000mm Filtration accuracy: 1 m-100 m Filtration area: 0.1-1000 Maximum working temperature: 600 C Resistance coefficient:
Product Name : Conductive Carbon Black Nano powder Pack Size: 10 gram, 50gram, 100gam ,250gram, 500 gram Product Name Conductive Carbon Black Nanopowder Cas No 7440-44-0 Appearance Black Powder Purity 99.9% APS 60-70 nm (Can be Customized) Formula C Product no. SCM-NM-104/22 Molar Weight N/A Description :- Our company's Conductive Carbon Black Nanopowder is produced by selecting perennial mountain trees as row materials, through high temperature (1300o C) carbonization, ultra-fine nano-grinding, therefore, the nanopowder possesses the following features: Powerful specific surface Area (SSA700m2/g). Electrical resistivity (0.30.cm); Easy to be dispersed. It can be used for plastics, rubber, electronics technology, anti-static materials. It is all-natural, non-polluting material - It is the real green conductive material. Damp reunion will affect its dispersion performance and using effects, therefore, this product should be sealed in vacuum and stored in cool and dry room and it should not be exposure to air. In addition, the product should be avoided under stress. Related Product: Conductive Carbon Black Water Dispersion, 150nm Conductive Carbon Black Dry Nanoparticles, 150nm Storage Conditions: Airtight Sealed, Avoid light and keep dry at room temperature. Please contact us for customization & Price inquiry Note : We supply different size ranges of MAXene/MXene, Nano/Micron, Solutions, Size as per the customer requirements and also accept customization in various parameterts.
Metal scrap and steel, cooking oil of various types, building material, logistics and agro products e.T.C. We deal very strongly in both ferrous and non ferrrous metals, copper wire scrap , aluminium wire scrap, aluminium ingots such as a7, a8,hms, aluminium , ubc , profiles aluminium wheels brass,hms, cast iron, pvc, big bags scrap cement. We buy and sell all these products,, tiles,ceramics, food products, powder milk.Logistics
Metals & non-ferrous: copper cathodes, copper powder, thermal coal, nickel, iron pipes, cobalt Agricultural: cocoa, coffee, Arabic gum, black pepper.
Alumina based Sintered Mullite is made of high-quality alumina powder by special process and sintered at high temperature. The product has the characteristics of high fire resistance, good resistance to chemical corrosion and good thermal vibration stability, which is widely used in iron and steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
We do custom synthesis of Ag, Au, Os, Pt, Pd, Rh, Ru, Ir, Cs and Rb compounds: Metal and alloy powders Inorganic and chelated chemicals Organometallic compounds For the following industries: Catalysis New energy materials Advanced ceramics 3-D printing materials
Iron slag, copper slag, salt.
