Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy:
1. High fluidity allowing faster casting speeds
2. Better Homogeneity of the alloy and uniformity of the structure
3. Reduction of the crack tendency during solidification
4. Improvement of the surface quality
5. Enhancement of mechanical properties
6. Increase of the strength and toughness of aluminum alloy
Chemical Composition
AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max
Shape and Packages
Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case
Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet
Small Ingot: 25KGS/carton, 1000KGS/pallet
Cast cut bar: According to the length of the bar
Customer-made products for accurate and easy use could also be supplied.
C17200 is manufactured to provide a combination of high strength and hardness properties coupled with superior thermal properties. This range of properties makes C17200 the premier material for copper alloy molds and a wide range of other applications from oil and gas to aerospace.
Chemical Composition:
Be: 1.80-2.0%
Co+Ni: 0.20% Min.
Co+Ni+Fe: 0.60% Max.
Cu: Balance
Note:Â Copper plus additions equal 99.5% minimum.
Material description:
High strength, good fatigue strength, good conductivity,
non-magnetic, wear resistance
Applications
- Nozzles and needles for hot runner systems
- Inserts in plastic blow moulding and plastic injection moulding
- Needles and nozzles for hot canal systems
- Packing bearings rings in extreme high pressure hydraulics(e.g. jet cutting)
- Stud holders for stud welding equipment
- High strength, non-magnetic, non-sparking parts, sleeves,bushings, bearings for offshore, onshore, airplanes, precision instruments and medical applications moulding
Shapes :
Round bars, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.
Available Sizes:
Rod: Dia.5~200mm; Wire: Dia.0.1-5.0mm
Tube: OD10~60mm, ThK 0.1~10mm
Plate: thk min 0.5mm
Custom Diameter & Sizes, Random Mill lengths
Related Standard :
Rods/Bars/:Â ASTM B196; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651;
RWMA Class 4, GOST 15835
Tubes: ASTM B251,643
Strips:Â ASTM B194, AMS4530,4532; SAE J461,463, GOST 1789 Â
Sheets:Â ASTM B194
Wires:Â ASTM B197, AMS4725, SAE J461,463, JIS 3270, GOST 15834
Plates:Â ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4.
European Standards:Â CuBe2, DIN 2.1247, CW101C to EN, BrB2
Other material are also available
C17300/CuBe2Pb/CW102C/DIN 2.1248
C17500/CuCo2Be/CW104C/DIN 2.1285
C17510/CuNi2Be/CW110C/DIN 2.0850
CuCo1Ni1Be/CW103C
116787 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Chemical Composition:
Be: 0.40-0.70%
Co: 0.80-1.30%
Ni: 0.80-1.30%
Cu: Balance
Note:Â Copper plus additions equal 99.5% minimum.
Shapes :
Round bars, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.
Available Sizes:
Rod: Dia.5~16mm; Wire: Dia.0.1-5.0mm
Tube: OD10~60mm, ThK 0.1~10mm
Plate: thk min 0.5mm
Custom Diameter & Sizes, Random Mill lengths
Typical Physical Properties:
Density (g/cm3): 8.83
Density before age hardening (g/cm3): 8.75
Elastic Modulus (kg/mm2 (103)): 14.10
Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6
Thermal Conductivity: 209 W/m â?¢ oK at 20 C
Melting Range (°C): 1000-1070
Note:Â
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.
Related Standard :
Rods/Bars/Tubes:Â ASTM B441, SAE J461,463; RWMA Class 3
Sheets:Â ASTM B534
Wires:Â ASTM B441
Plates:Â ASTM B534, SAE J461,463; RWMA Class 3
European Standards:Â CuCo1Ni1Be, CW103C to EN
Other material are also available
C17200/CuBe2/CW101C/DIN 2.1247
C17300/CuBe2Pb/CW102C/DIN 2.1248
C17500/CuCo2Be/CW104C/DIN 2.1285
C17510/CuNi2Be/CW110C/DIN 2.0850
CuCo1Ni1Be/CW103C
Adhesive Ferrite Magnet:
Size: Customized is available
Reasonable price and shipping rates
Self Adhesive
Description:
Ferrite magnet
Material: Ferrite magnet
Magnetic Properties of Sintered Hard Ferrite Amazon hot sale products D18*5,D25*4
Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material.
NdFeB is the most advanced commercialized permanent magnet material available today.
This material has similar properties as the samarium cobalt except that it is more easily oxidized
and generally doesn't have the same temperature resistance.
However, NdFeB magnets have the highest energy products approaching 52MGOe and are
mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than
ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs
that result in innovative applications and lower manufacturing costs.
Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that
allow them to be used in most applications. These treatments include copper, silver,, gold, nickel,
zinc and tin plating and epoxy resin coating.
Beneficial characteristics of NdFeB magnets include their very high energy product, very high
coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength,
and low corrosion resistance when not properly coated or plated.
Magnetic Grades and Temperature:
The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe
how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted.
One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet.
Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
Rubber magnet is a magnet compounded by magnetic powder and high polymer materials through the special craft.
1) surface: PVC or double self- adhesive + uv oil.
2) type: magnetic sheet, flexible magnetic roll,magnetic strip.
3) magnetic grade: Isotropic & anisotropic
4) supply the widest size is 1020 mm.
5) thickness: from 0.3mm to 5mm
6) it is safe and non-toxic
7) fashionable design gives you a fresh feeling
8) widely used for sale promotion,advertisement,souvenir and gift
9)low price,high quality.good service and fast delivery
10)Applications:
Isotropic rubber magnets have weak magnetism, are used on iceboxes, presswork and marketing and promotion premiums.
Anisotropic rubber magnets have strong magnetism, and are used in such applications as micro-motors and magnet toys.
We are a manufacturer specialized in NdFeB magnets. Magnetic balls (neocube) are just a part of our products. We make this magnetic balls with rich experience, and now we are the biggest suppliers for this magnetic balls (neocube).
For all of our balls, the tolerance for size is only +/-0.03mm (national standard of the balls tolerance is +/-0.05mm), our for the power (strength) of our balls, it is very strong., it can reach 5500 Guass (most of others supply the balls with big tolerance, and the power is only about 4500 Guass).
While for this high quality products, we supply with the lowest price, Here we warranttee for the neocubes, we supply with the bottom price. As our aim is let our customers get the most benefits from our good quality products with lowest price and best service. Our first thinking is for customers. So now we are the biggest maker and supplier for neocubes.
Now for Neocubes, we have 216PCS-set, 343PCS-set, 224PCS-set, 251PCS-set. And for this toys, we have CE certification. For the colors, we have silver color, black color and golden color. For how to play with it, please see our video on website.
Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material.
NdFeB is the most advanced commercialized permanent magnet material available today.
This material has similar properties as the samarium cobalt except that it is more easily oxidized
and generally doesn't have the same temperature resistance.
However, NdFeB magnets have the highest energy products approaching 52MGOe and are
mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than
ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs
that result in innovative applications and lower manufacturing costs.
Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that
allow them to be used in most applications. These treatments include copper, silver,, gold, nickel,
zinc and tin plating and epoxy resin coating.
Beneficial characteristics of NdFeB magnets include their very high energy product, very high
coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength,
and low corrosion resistance when not properly coated or plated.
Magnetic Grades and Temperature:
The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe
how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted.
One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet.
Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material.
NdFeB is the most advanced commercialized permanent magnet material available today.
This material has similar properties as the samarium cobalt except that it is more easily oxidized
and generally doesn't have the same temperature resistance.
However, NdFeB magnets have the highest energy products approaching 52MGOe and are
mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than
ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs
that result in innovative applications and lower manufacturing costs.
Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that
allow them to be used in most applications. These treatments include copper, silver,, gold, nickel,
zinc and tin plating and epoxy resin coating.
Beneficial characteristics of NdFeB magnets include their very high energy product, very high
coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength,
and low corrosion resistance when not properly coated or plated.
Magnetic Grades and Temperature:
The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe
how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted.
One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet.
Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material.
NdFeB is the most advanced commercialized permanent magnet material available today.
This material has similar properties as the samarium cobalt except that it is more easily oxidized
and generally doesn't have the same temperature resistance.
However, NdFeB magnets have the highest energy products approaching 52MGOe and are
mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than
ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs
that result in innovative applications and lower manufacturing costs.
Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that
allow them to be used in most applications. These treatments include copper, silver,, gold, nickel,
zinc and tin plating and epoxy resin coating.
Beneficial characteristics of NdFeB magnets include their very high energy product, very high
coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength,
and low corrosion resistance when not properly coated or plated.
Magnetic Grades and Temperature:
The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe
how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted.
One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet.
Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
Presentation: Granules ( Shot ) in bulk (3mm to 16mm) or as requested, or super sacs of 500 Kg, 1000Kg or 1500 Kg
Composition: Aluminum 99.5% or in any requested alloy
Origen: South America
Quantity: 400 Metric Tons monthly
Feature points:
1. Good cutting effect with high precision linear and margin smooth.
2. High quality tungsten carbide as taw material, higher hardness,
Longer life(over 2500m).
3. Using easier andgreener. No need electricity and water, no noise, no dust.
4. Available for customized size.
Feature points:
1. Good cutting effect with high precision linear and margin smooth.
2. High quality tungsten carbide as taw material, higher hardness,
Longer life(over 2500m).
3. Using easier and ??greener??. No need electricity and water, no noise, no dust.
4. Available for customized size.
