provide High Density Tungsten Heavy Alloy Plates / Bars Thickness 0.1mm to 120mm WNiCu Density of tungsten heavy alloy plates usually ranges from 17.0g/cm3 to 18.8g/cm3, which is the twice of steel, more than 1.5 times of lead. It has low thermal expansion coefficient, high strength and high modulus of elasticity. Tungsten heavy alloy has low thermal coefficient but it has high absorption ability and high-energy rays. The tungsten heavy alloy we make conforms to ASTM B777-99 standard. Tungsten heavy alloy plates are widely supplied for balancing molds and high temperature molds. Also it can be made into protective shields and high energy rays. Tungsten heavy alloy plates play an important role in aircraft controlling surfaces, helicopter rotor systems, parts of engine and shipping ballast.
Tungsten Boats Evaporation Boats for Vacuum Metalizing 99.95 % Tungsten Products Tungsten Boats Evaporation Boats for Vacuum Metalizing As a high performance materials, Pure Tungsten has high melting temperature, high density, low vapor pressure, low thermal expansion combined with good thermal conductivity, sufficient electrical resistance, high modulus of elasticity. Tungsten boat is widely used in metallizing, electron-beam spraying as well as sintering and annealing in reducing atmosphere in electronics and light industries. Manufactured by the special production line in our corporation, tungsten boats can provide reliable guarantee of product quality for the users by adopting excellent tungsten materials with high purity, advanced techniques as well as special treatment to the product surfaces. Tungsten boats are mainly used for evaporation or metalization of Al, Ni, Cu, Ag and many other metals in vaccuum furnaces.
Hollow OD20mm - 100mm Pure Tungsten Rod Surface Polished For Heating Tungsten hollow rods can be made as per customers designs. Its outer diameter is within 100mm, inner diameter no less than 5mm, length is below 500mm. Tungsten hollow rods are widely used in vacuum coating industry, target materials raw materials, aerospace industry, Marine automobile industry, electrical industry, instruments industry, etc. We produce tungsten hollow rods by tungsten powder with 99.95% purity. High quality products have been made after decades of procedures such as pressing, sintering, rolling, cutting and surface grinding. Super sputtering target (single heavy reach to 120kg) is available at present. Tungsten Hollow Rods Description: Purity: Wâ?¥99.95% Density: more than 19.1g/cm3 Tolerance: +/-0.05mm Supply state: Surface polishing, CNC machine processing Quality standard: ASTM B760-86, GB 3875-83
K20 K30 Customized cutting tungsten carbide Tablets For Alloy Steel / Iron Tungsten carbide tablets are widely used in petroleum drilling and snow removal,snow plow machines and other equipments. Also be used fordrilling,mining and road sweeping machine,snow removal and road maintenance tools. Also,it has a great help in quarrying,mining,tunneling tools,as well as civil construction. Description of Carbide Tablets: As special carbide products manufacturer, we are good at producing different kinds of tools as needed. Tungsten carbide material can be treated with cobalt to produce certain characteristics. The more cobalt in the metal, the shock resistant is better. While less cobalt will result in a more wear-resistant metal. Our application engineers are experienced at helping clients find the right blades for their needs. Advantages of Our Carbide Tablets: 1. Dust-free workshop 2. Virgin raw material with fine grain size 3. Advanced technology and production equipment 4. All of the mould with precision design 5. Strict quality testing and inspection
K20 K30 Customized cutting tungsten carbide Tablets For Alloy Steel / Iron Tungsten carbide tablets are widely used in petroleum drilling and snow removal,snow plow machines and other equipments. Also be used fordrilling,mining and road sweeping machine,snow removal and road maintenance tools. Also,it has a great help in quarrying,mining,tunneling tools,as well as civil construction. Description of Carbide Tablets: As special carbide products manufacturer, we are good at producing different kinds of tools as needed. Tungsten carbide material can be treated with cobalt to produce certain characteristics. The more cobalt in the metal, the shock resistant is better. While less cobalt will result in a more wear-resistant metal. Our application engineers are experienced at helping clients find the right blades for their needs. Advantages of Our Carbide Tablets: 1. Dust-free workshop 2. Virgin raw material with fine grain size 3. Advanced technology and production equipment 4. All of the mould with precision design 5. Strict quality testing and inspection
Customized K20 Tungsten Carbide Shredder Tips Cutting Tools for Crusher Machines Due to it's superior wear resistance and hardness, tungsten Carbide Shredder tips are widely used on crusher machines in recycling industry, which is sharp enough to help you increase work efficiency and have much longer using life than normal steel shredder tips. OEM production as per customers drawing and designs. Also we can select proper material grade according to your usage. ZK30UF is the most commonly used material grade for carbide shredders. Quality Control: Constant quality checks accompany the whole production process of tungsten carbide shredder tips to assure our customers are receiving the highest quality products. Test reports supplied with shipment. Advantages of Carbide Tips for Shredders: Tungsten Carbide Shredder Tips for Crusher Machines: 1. Top-quality virgin raw material 2. Produced with precision molds, the products have better dimensional accuracy and uniform. 3. High precision surface,burr-free 4. more than 10 years professional manufacture experience 5. Strict quality management system 6. Small orders accepted. 7. OEM and ODM
Tungsten Heavy Alloys (WHAs) are tungsten alloys that typically contain 90 to 98 wt% W. Most commercial tungsten alloys are two-phase structures, the principal phase being nearly pure tungsten in association with a binder phase containing the transition metals plus dissolved tungsten. As a consequence, WHAs derives their fundamental properties from those of the principal tungsten phase, which provides for both high density and high elastic stiffness. It is these two properties that give rise to must applications for this family of materials.
WAL1 WAL2 Tungsten Products Tungsten Wire Surface Black / Cleaned For Lightening Tungsten with high melting point, high resistance, good intensity and low evaporation pressure, suitable for making heating element. Placing film material (aluminum, chrome, indium etc.) in vacuum metalizing machine, with high vacuum, the heating element (tungsten heater) will evaporate the film turn into shiny and beautiful film. Description of Tungsten Wire: 1. Purity: 99.95%-99.98%; 2. Grade: W1, WAL1,W-4 3. Density:19.2g/cm3 4. Package:wooden case or on request; 5. The tungsten wire features excellent formability, long life and super lighting efficiency. Mainly used for making various electron tube, H series auto lamp,halogen lamp and other special lamp.
Content:> 99.95% Grade: W -1 OD: 10mm - 100mm Standard: ASTM B 760 Surface: Ground, Polished Density 19.1 G / Cm3 Ground and Polished Tungsten Tubes Target , Tungsten Products in Tube Shape Tungsten tube target, belongs to sputtering targets. Its diameter is within 300mm,length is below 500mm,width is below 300mm and the thickness is above 0.3mm. Widely used in vacuum coating industry, target materials raw materials, aerospace industry, Marine automobile industry, electrical industry, instruments industry, etc. We produce tungsten tube targets that made with tungsten powder which purity is 99.95%. High quality products have been made after decades of procedures such as pressing, sintering, rolling, cutting and surface grinding. Super sputtering target (single heavy reach to 120kg) is available at present. Tungsten Sputtering Tube Target Description: Purity: Wâ?¥99.95% Density: more than 19.1g/cm3 Tolerance: +/-0.05mm Supply state: Surface polishing, CNC machine processing Quality standard: ASTM B760-86, GB 3875-83 Sizes Of Tungsten Tube Targets: Disc target: Diameter: 10mm to 360mm Thickness: 1mm to 10mm Planar target Width: 20mm to 600mm Length: 20mm to 2000mm Thickness: 1mm to 10mm Rotary target Outer diameter:20mm to 400mm Wall thickness: 1mm to 30mm Length: 100mm to 3000mm
type of package :in big-bag chemical composition Mn65%-70% Si 15%-17% C 1.6% P 0.035% S 0.02% Fraction 10-80 This product is in Georgia ,the place of boot is Port of poti ,we can sell every month 1000MT I
Tungsten bolts, Tungsten fastener Material : Pure W purity:ã??99.95%ã??W size: M2 â?? M90 Surfaceï¼?Polishing Main Item / Productï¼?titanium foil/titanium bar/Titanium tubetitanium fastener/Zirconium sheet/Zirconium tube/Zirconium bar/Tungsten plate/Tungsten Bar/Tungsten fastener/Molybdenum sheet/Molybdenum rods/molybdenum wire/Tantalum sheet/Tantalum strip/Tantalum rod/Tantalum wire/Tantalum tube/Niobium sheet/Niobium foil/Niobium tube/Niobium bar /Niobium wire/Cobalt wire/Cobalt rod/ Cobalt plate/Evaporation Pellets & Pieces/Crucibles/Pure metal and metal alloy sputtering target material
1. Reverse Circulation Fishing Magnet: Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole. Construction: Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select appropriate guide. Operation: Run the fishing magnet in a place which approximate 40 inches from the bottom of hole. Circulate to wash the fish,reduce circulation and lower the fishing magnet to the bottom of hole to attach the fish. Slowly rotate to ensure positive contact. Lift up 10 to 20 inches, drop the steel ball into the fishing string, and pump the steel ball into ball seat. Rotate and circulate for a moment, discontinue circulation and lift the fishing magnet from the hole. Optional Accessories: A flush guide is standard. Lipped guides and mill guides are also available.
40%min and up
CoO 1.Co 77.5-78.5% 2.Impurity Max each Ni0.02%, Fe/Ca/Mg/Na/Si0.005%, Mn/Cu/Zn0.003% 3.Size 0.45um Co3O4 1.Co 72.6-73.6% 2.Impurity Max each Fe0.01%, Cu0.003%, Ca/Ni/Mg/Zn/Mn0.005%, Na/Si0.015% 3.Size 4-6um Packing 25kgs in plastic bag with iron drum outside
1. Reverse Circulation Fishing Magnet: Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole. Construction: Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select appropriate guide. Operation: Run the fishing magnet in a place which approximate 40 inches from the bottom of hole. Circulate to wash the fish,reduce circulation and lower the fishing magnet to the bottom of hole to attach the fish. Slowly rotate to ensure positive contact. Lift up 10 to 20 inches, drop the steel ball into the fishing string, and pump the steel ball into ball seat. Rotate and circulate for a moment, discontinue circulation and lift the fishing magnet from the hole. Optional Accessories: A flush guide is standard. Lipped guides and mill guides are also available. 2.Standard Fishing Magnet: Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The tools design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation. Construction: The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Hi.We have a supply range of cobalt powder. If you are instrested , then feel free to contact us.
Copper Phthalocyanine Crude
We are an international trading company based in Toronto Canada with branch operations in China, Vietnam, and Korea. Our focus is on facilitating trading partnerships and creating enduring relationships. We have the following product in a safe warehouse for liquidation to best offer: 1. Aluminum ingot as prescribed in the Chinese National Standard of GB/T1196-2008 AL99.70, with aluminum content of no less than 99.7%, maximum 0.16% iron, maximum 0.13% silicon, and maximum 0.010% copper. 2. Aluminum bar 6063 as prescribed in the Chinese National Standard of GB/T 3191-1998, with minimum 0.2% and maximum 0.6% silicon, maximum 0.10% copper, minimum 0.45% and maximum 0.9% magnesium, maximum 0.10% zinc, maximum 0.10% manganese, maximum 0.10% titanium, maximum 0.10% chromium, maximum 0.35% iron. Other impurity elements no more than 0.05% each and 0.15% total. Remainder aluminum. We look forward to hearing from you.
Staubli Dobby Spare Part We are one of the trusted names in the Indian Weaving Spares Manufacturing units, when it comes to superior quality of Dobby Spares. The well designed Dobby Spares offered by us are fabricated using imported raw materials and therefore they have very strong and durable structure. Along with this, the anti-abrasive and anti corrosive nature of our Spares also adds to their market value. Our Staubli Dobby Spares fits in perfectly in the machine and offers better performance even better than the original spare. Our Range Dobby 2665 Spares Spares for Tappet (CAM Motion) Spares Dobby Spare Parts Why our Dobby Spares ? Fits in better than the original Durable and strong Made from imported materials Anti corrosive in nature Anti abrasive Improves overall performance Widely used in Apparel manufacturing units Textile industries Garment manufacturing units
We are looking for buyers worldwide for Nickel Sludge content 50% with low moisture rate.
