Technical parameter: 1 dimensional accuracy: ¡¨¤0.5mm 5 max width of cutting¡êo4800mm 6 max carriage return speed: 3000mm/s 7 length range of the cutting board: 600¡«10000mm 8 adapt to hunting range: ¡¨¤200mm According to clients' specific requirement, we design the equipment for them.
Technical parameter: Applicable for glass thickness 1.5¡«25mm Max length of the rod: 3400mm Nose linear velocity: 50¡«1000m/h Adjustable distance range of the nose:1900mm Tilt angle of the nose in horizontal place: ¡¨¤15 Urgency uplift hight: 90mm Rod fluctuation: 80mm Diameter runout of the nose Above parameter can be designed according to customer¡¡¥s requirement. We design as per clients' specific requirements.
Its furnace life, energy consumption and product quality keep leading position in china market. Especially the low energy consumption which can save 10% the same cost of furnace, making it the competitive advantage of zgiec over other competitors.Zgiec can design for clients according to their detailed requirements for glass furnace. According to specific equipment conditions
According to actual conditions
Main technical parameter: 1 width module: 300mm; 2 brick thickness ;380mm; 3 length of feeder nose:1700-2300mm; 4 service life: over 10years We design for clients as per their specific requirements.
Pet.Coke dry powder combustion system. Water content ¡â2.0% Finess:200mesh¡ã100% Ii) Pet.Coke powder consumption:28t/d Iii) Requirements for compressed air:0.7mpa, 10m©ø/min Dry compressed air:0.7mpa, flow rate 10m©ø/min(stable pressure and flow rate) Iv)15 kw power:service power 15kw
Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.
Main use: Mianly used to produce the tempering glass for facades of building, curtain walls, household furniture, etc. Main technological features: 1, the furnace has two chambers, one for preheating and the other for heating.Due to this, the heating efficiency is higher and the productivity is 1.4-1.8 times than that of the single-chambered furnace. 2, an independent heating source is separately fixed onto the preheating chamber and the tempering furnace. Glass enters teh preheating chamber and then the tempering furnace to get heated. 3, glass will get preheated during the preheating section, which could ensure the glass be heated more evenly and increase the finished product rate.
Main use: Gx-sq series hyperboloidal glass tempering furnace is the new product of gangxin corporation, it's mainly used to produce the tempered glass for sidelites, back window of high-grade automobiles, and the home appliances, facedes of building, etc. Main technological features: 1, forming under high temperature more precisely with spherical surface more smooth and perfect. 2, with low-cost mould-made process, it's fast and convenient to make the replacement. 3, it achieves the completely automatic control in whole production, has slef-diagnosis capacity and comfortable human-machine interface, offers the production software based on 2 working stations or 3 working stations.
The distance between the foot line of l-shaped wall and top surface of sidewall is short, which allows thinner batch feeding so that the batch can be melted more easily. It can also reduce fire and batch running at the charge end and hence energy can be saved and environment improved.With its high reliability and long service life span, the l-shaped suspended back wall serves as one of the essential measures for prolonging the whole furnace life. Main technical index: 1. Modulus width of suspended wall: 300mm; 2. Width of brick structure: 380mm; 3. Length of nose zone (doghouse): 1700-2300mm; 4. Service life: more than 10 years.
The top roller installed at the both sides of the tin bath can effectively control the width and thickness of the gross glass ribbon. The main technical index: 1. The thickness of glass sheet:1.0-25mm 2. The horizontal oscillative angle of head: 3. The accuracy of head's oscillative angle: 4. The speed of rotating coil of head: 10-1500m/h 5. The accuracy of coil-speed of head: 0.01% 6. The radial direction run-out should be no more than 0.2mm 7. The accuracy of head's pressed-depth: 0.1mm 8. The biggest depth for head (inside the bath): 2000mm 9. The longest distance of machine frame for lifting up and down: 100mm 10. The accuracy of machine frame for lifting up and down: 0.1mm 11. All the above index can be customer-designed.
Used in float glass and ultra clear patterned glass production line, it includes the shell of the annealing lehr, transmission, hot air circulation system, electric heating system and control system. The main technical index: 1. Suitable for gross ribbon width: 2000mm-5400mm; 2. Suitable for gross ribbon thickness: 1.5mm-20mm; 3. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365mm.
It is applied to large size doghouse. A couple of chargers are linked together so as to reduce their distance. In this way, it can well solve the batch off-track problem and cancel the water drum in the middle of batch tank. The batch could be evenly charged and its operation is very stable and continuous. By absorbing the batch charger technology at home and abroad, our company has tried some innovation on the batch charger in terms of its shovel plate quality and structure, thus improved its high temperature resistance in production, working stability and continuity. There are two types of batch chargers, namely arc blanket charger and inclining blanket charger.
Max.Glass: 3000*2000m Min. Processed glass: 500*500mm Glass thinkness: 5-30mm No. Of axis: 5 axis Intalled power: 33kw Spindle power: 7.5kw Speed of spindle: 0-12000 r.P.M Tool changer: 6*2 Machine dimension:9000*2400*3730mm Weight: 5000kg
Processing options Continue shape without corners Shape with corners Matching with straight-line bevels Diamond-shaped bevel Max. Glass diameter: 1800mm Min. Glass diameter: 260mm Max. Thickness of glass 30mm Min. Thickness of glass 5mm Max. Width of bevel: 35mm
Made of ss 304/316 with satin/mirror polishing.
As per ISI and BS Standard Standard lot size
Glass fittings Material:stainless 316 and stainless 304 surface finish : satin mirror shape Demension : center to center 250 , 220, 210, 204, 200, 150 mm Models : t250-x, t220-x , t210-x, t204-x, t200-x, t150-x T250-y, t250-v, t250-i.T250-v/2, t250-i/2 F250-x, f250-y.F250-v, f250-i.F250-v/2, f250-i/2, F220, f210, f204, f200, f150 Wooden carton or paper carton
Used for injection vials
Bottles and vials for injection, syrups, tablets, droppers, capsules.
