Agitator Accessories: Agitators, reducers, flush valves mechanical seals and gasket, etc. Non-package ron or wooden pedestal, suitable for inland or marine transportation, split flanges are provided for all glass lined nozzles and gl nozzles are protected with blind flanges.
Detection of e. Coli o157 article qualitative detection of colloidal gold feces, food, water and other samples of e. Coli o157. The degree of color is proportional to the sample bacteria. Enrichment effect well. Can be used to treat samples in rapid screening, positive samples can be isolated bacteria, reduce the workload. Steps: 1. Will be placed on the detection of clean, dry working platform. 2. Provided with the kit with clean straw or from the pipette to take samples or enrichment sample 2 drops, drops added to the test sample by adding end section (detection section white side), start timing; 3. 2-15 minutes of observation, 15 minutes after the results do not count. [Results judge] negative: a red line appears, which appears in the control line position of a red line; positive: two red lines appear, that in the test line and control line positions are there red line; invalid: no red line appears that the test line and control line in the position not appear red. [Treatment of samples to be tested] 1. Direct detection: direct detection of water will be. 2. By bacteria detection (1) stool samples: the samples of the inoculated immediately take 1 gram of 9ml of mec broth, 37 constant temperature shaking culture 6h. (2) food samples: the 25 g samples of ground, and immediately inoculated in 225ml of mec broth, 37 constant temperature shaking culture 9h. (3) water samples: water samples will be 400ml immediately inoculated in 5 times concentrated mec 100ml in broth, 37 constant temperature shaking culture 16-20h. 3. Proposed use of enrichment broth was added 20mg / l novobiocin the ec modified broth. [Interpretation of the results] 1. Enrichment after negative results may be judged as negative. 2. Or by direct detection of bacteria have positive results, the pathogen can be isolated. 3. Negative result does not have a precise meaning. [storage] 4-30 , cool dark dry place.
Glass lined reactor, jacketed, 50L-80000L capacity, two pieces type (i.e. FK, open type) and one piece type ( i.e. FF, closed type), with good anti-corrosion performance widely to be used in the reaction, neutralization, and polymerization etc process: 1. The detailed assembling of our Glass lined reactor: (1) Electric Motor: Explosion-proof, Ordinary type; (2) Reducer(i.e.gear box): Cycloidal-pin wheel type, Spiral bevel gear type, Helical gear type; (3) Seal type: Packing seal, Mechanical Seal (single type, double type); (4) Agitator: Frame type, Anchor type, Impeller type, Paddle type, combination type; (5) Thermometer Pocket: A type (Straight); B type (Slant), C type ( Slant with Wing); (6) Bottom discharge Valve: Upper extension type, 2. The technical performance of our Glass lined reactor: (1)The working pressure: Inside the vessel: less than or equal to 1.0Mpa (for Packing seal: less than or equal to 0.2Mpa; for Single mechanical seal: less than or equal to 0.4Mpa, for Double mechanical seal: less than or equal to1.0Mpa); Inside the jacket: less than or equal to 0.6Mpa; (2) The working temperature: from -20 degree centigrade to 200 Celsius degree, the cooling shock: 110 Celsius degree, the thermal shock: 120 Celsius degree; (3) The Glass-lining thickness: 0.8-2.0mm; (4) The high Voltage-test to the Glass-lining: 20KV. (5) Nonstick: the smooth and clean glass-lining surface is nonstick to the materials. (6) Anti-corrosion performance: suitable for all kinds of organic or inorganic acids, organic solvents and weak alkaline etc. Besides Glass lined reactor, we also make Glass lined storage tank 200L-50000L, distiller 300L-6000L, condenser and dryer etc, certified by ISO900 and as one world class manufacturer & supplier of Glass lined equipments in china, we promise our products in high quality with favorable price and excellent service, select us, select trust, please contact us for more details, thanks.
Semi-automatic laminated glass production line, we often call it lamination line, laminated glass line. This line includes different equipment such as washing machine, PVB unwinding machine, laminating positioning and transmission machine, movable scissor sucking hanger, pre-laminating and pressing section and autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation. £¨1£©The whole line is centralized control by PLC . £¨2£©Washing and drying machine is the core equipment of the whole line. The upper Rubber rollers, brush rollers and air-knives etc. can be adjusted on the panel and digital displayed according to the thickness of glass to be processed. The upper section of the machines can be elevated by 400mm for convenience of cleaning and repairing. The Brush Rollers are driven by motors with upper and lower separately. Allocation of one soft brush and two hard brushes (can be lifted when needed) in the upper washing sector is designed for washing hard low-e glass, coated glass without damaging the coating. Three Stainless steel air-knives, the blower equipped with muffle cotton and air feeding filter screen pack ensures plenty of air, less noise and the good drying effect. £¨3£©In the laminating room the laminating table, brace of the up-down device, positioning cylinder, PVB film unwinding machine, movable scissor cup suction hunger, convenient for processing of large and big glasses. Every single processing glass can be conveyed in a higher speed to enter into the Pre-laminating and pressing section and regulated automatically the speed to running at the same speed with the Pre-laminating and pressing section which can make room for the next pieces of glass which improves the running efficiency of the Line. £¨4£©Pre-laminating and pressing section has reasonable structure. The integrity is controlled in laminating room with its stable running function. Speed regulation is frequency variable. Space/distance between two great squeezing rollers is set by industrial computer assisted by PLC with monitor displayed. The great squeezing rollers are driven by reducer separately. The heating elements adopt Quartz -Heaters. Temperature is zone control. £¨5£©Autoclave is a specialized machine for production of laminated, anti-bullet and anti-bombing glass. This machine will melt the PVB film and combined two layers or more than two layers glass by high temperature and high pressure. Technical parameters 1. Max. Processing glass size:6000mm2500mm 2. Min. Processing glass size:400mm 400mm 3. Processing laminated glass thickness: 6-80mm 4. Total length: 26800mm 5. Power source: AC380V 50 HZ 6. Total power:138.63 KW(without autoclave power)
The distance between the foot line of l-shaped wall and top surface of sidewall is short, which allows thinner batch feeding so that the batch can be melted more easily. It can also reduce fire and batch running at the charge end and hence energy can be saved and environment improved.With its high reliability and long service life span, the l-shaped suspended back wall serves as one of the essential measures for prolonging the whole furnace life. Main technical index: 1. Modulus width of suspended wall: 300mm; 2. Width of brick structure: 380mm; 3. Length of nose zone (doghouse): 1700-2300mm; 4. Service life: more than 10 years.
HEXIN Laminated glass is a film in the two or more pieces of glass between the adhesive material PVB (polyvinyl butyral) or EVA (vinyl acetate polymer) interlayer, SGP film bonded together by high temperature and pressure Made of advanced safety glass. Features: Safety: The laminated glass installed on the building is subjected to any external shock, even if the glass is broken, remains intact on the original frame, and the inside and outside of the building will not be damaged by splashing glass fragments; Anti-hurricane and earthquake: even if the glass is broken, it will not fall to the whole floor remains in place; Anti-ultraviolet: the sun in the ultraviolet light has a great barrier effect, the UV rate of up to 99% or more, to avoid ultraviolet radiation; Noise reduction: PVB film has a barrier absorption of sound waves, thereby reducing noise. specification: Production thickness: 5mm-60mm Maximum size: 2440mm * 3660mm Minimum size: 300mm * 300mm Standard: In line with: GB15763.3-2009 national standards; in line with GB9962 "laminated glass" national standards through the CE EN 12150 SGCC safety glass certification.
HUGE AISA Hard Coating Reflective Glass is made by on-line coating system.Advanced CVD technology (chemical vapor deposition) creates a perfectly unformed layer of metal oxide chemically boned to the surface of the body tinted glass,as this hard chemaical layer fully bonds to the glass. Reflective Glass reduces the transmission of solar heat radition. It is widely used in architect's designs. It is suitable for glass curtain wall ans blends well with metal,concrete, tiles, granite, marble and other building materials. 1.Thickness:3mm -12mm 2.Size:1524x2134mm,1650x2140mm,1830x2440mm,2140x3300 mm, 2140x3660mm,2250x3300mm, 3660x2140mm etc. 3.Color: Broze:Euro Bronze, Golden Bronze, Red Bronze Blue:Ford Blue, Ocean Blue, Dark Blue, Dark Blue, Lake Blue, Sky Blue, Royal Blue Green:French Green, Dark Green Grey: Euro Grey, Mist Grey, Dark Grey,Century Grey Clear, Pink, Golden, Silver etc. 4.Shape: Flat 5.Structure:Solid 6.Function: Decorative Glass, Heat Absorbing Glass, Heat Reflective Glass 7.Safety wooden crate, paper/powder interlayer between sheet, suitable for ocean and land carriage
Products & Usage: 1. Relief art It can be used for outdoor decoration, indoor decoration, holiday decoration, club decoration, hotel decoration, garden decoration, art collection and so on. It can be use for walls, gates and where you like. 2. Fiberglass doors Fiberglass is a practical choice for most people. These doors are available with a smooth surface or, more typically, an embossed wood-grain texture. An edge treatment on some makes them look more like real wood. Pros: Fiberglass doors resist wear and tear better than steel. They can be painted or stained, are moderately priced and dent-resistant, and require little maintenance. Cons: They can crack under severe impact. Fiberglass doors typically have more insulating value than wood doors. Models with glass, double- or triple-panel insulating glass to reduce heat transfer, since doors are a small part of the surface area of a house and typically don't allow significant amounts of warm air to escape. What's more, heat is generally lost through air leaks around the door, not through the door itself. Designs: Our Company have 10 to 12 designs ready and moreover you can choose your own design 3. Fiberglass Products a. Shades b. Canopy c. Car parking d. Self supported Dooms, tarpaulin cloth + iron e. Containers f. Temporary cabin, site office etc. g. Rooms & Cabins in 1. Thermopolis insulation 2. MDF lamination fiberglass 4. Chemical resistance lining Chemical resistance lining is use for chemical storage places like HCL, NACL, H2, H3 etc Details of Fiberglass Relief Art Advantage: Long service life and more economical Main material: Cast stone/Fiber stone Customize design: Welcomed Surface texture: Natural stone looking Quality: Consistently deliver high quality products Finish of Bas relief: Hand-made Color: Sandstone color/or any what you want Type: Classic and contemporary Design: ????? Features: Eco-friendly, durable and weather ability Per kg depends on demand
Brief Introduction Vertical insulating glass production line is used to make insulating glass. This machine can make double and triple Insulating glass units. The insulating glass production line is the main equipment to produce insulating glass. The machine consists of input unit, glass washing and drying unit, cleanness inspecting unit, aluminum spacer assembly unit, panel pressing unit, tilting table. Input unit conveys glass sheets into washing and drying unit automatically. Washing and drying unit uses 3 pairs of brushes and entire rubber rollers, with hot air system and hot water system, to achieve better cleanness of glass. Cleanness inspecting units equipped with inspecting lights is used to inspect whether the glass is clean or not. Aluminum spacer assembly unit with spacer positioning system is used to load aluminum spacers onto glass sheets. Panel pressing unit with hydraulic driving system can press two sheets of glass with spacer together. Tilting table with universal wheels tilts insulating glass units to horizontal position. Features Automatic PLC Control System in whole manufacturing process, equipped with man-machine interface touch screen Realize the surface layer of coated glass and LOW-E glass automatically The washing unit and water system use stainless steel and anticorrosion material with all parts and it has features of super durability Applicable for washing glass with the thickness of 3 to 12mm, with specially designed automatic glass transport mechanism of washing and drying unit With multistage frequency conversion control and multi-speed revolution optimization function, the machine can process all kinds of glass sheets with different glass size Washing glass continuously, distinguishing the first and the secongd glass sheet automatically Every glass transportation unit uses buffer stopping function to avoid bumping, and effectively reduces the wearing of conveying wheels from glass Capable to make triple or step insulating glass unit (optional) Main Technical Parameter
