Silicone powders lysi-100 is our new product of ultra-high molecular weight (uhmw) silicone plastic additives without any resin carrier. It overcomes the weakness of traditional silicone oil as the plastic additives. And it has a large silicone content, ultra- high molecular weight, no precipitation, not slipping in the screw extruder and so on. Typical performance: Name : lysi-100 Appearance: white powder Silicone content: 70% Dosage: 0.5-2% Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture f+¼a+ scratch and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength and surface gloss of fuel resistance (high filling) materials Good stability, non-migratory and surface without precipitation. Typical applications: Modification of plastics, cable materials, elastomers, thin-walled complicated parts, silicone core pipe and so on. For pa , pc, pps high temperature engineering plastics, can improve the flow of the resin and processing properties, promote the crystallization of pa, improve the surface smoothness and impact strength. . Use methods: Lysi-100 mixed with the resin at a certain proportion, then molding or pelleting directly. Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). 25kg, paper bag
Silicone masterbatch lysi-06 is our new product which dispersed in pp with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil easily to screw slip. A small amount addition can improve the flow of the resin and processing properties. Now it is widely used to improve the lubricity and surface properties of plastic. Typical performance: Name: lysi-06 Appearance: white pellet Silicone content: %50 Resin: pp Dosage: %0.5-10 Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, gloss·+ enhance the surface silk texture, scratch and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength . Good stability, non-migratory and surface without precipitation. Applications: (1) Pp packaging film (2) Automobile interior trim materials pp/talcf=tpo ( to improve scratch resistance and surface properties ) (3) Bopp, cpp films Use methods: Lysi-06 mixed with its compatible resin at a certain proportion then molding or pelleting directly Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, scratch resistance and abrasion resistance). 25kg/bag
Silicone masterbatch lysi-07 is our new product which dispersed in pa6 with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil as the additives, and it has large silicone content, ultra-high molecular weight, no precipitation and not slipping in the screw extruder and so on. Typical performance: Name: lysi-07 Appearance: white pellet Silicone content: %40 Resin base: pa6 Dosage: %0.5-10 Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling mold release and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture, scratch resistance and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength. Lower surface energy and improve the hydrophobic properties. Good stability, non-migratory and surface without precipitation. Applications: Pa series materials ( to improve flow ability, mold release, floating fiber ) Use methods: Drying the lysi-07 at 80-120fª about 4 to 5 hours, mixed with pa equally, then injection or extrude it to pellet. Or mix the lysi-07 and pa resin first, then molding after dried. Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 10% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). Added level at 2% to 5% is effective to improve the abrasion resistance, abrasion reduction to 30% to 80% 25kg/bag
Keysun vci master-batch is a nitrite-free anti-corrosion master-batch designed for both ferrous and most of the non-ferrous metals. The vci (volatile corrosion inhibitor) additives in keysun-vcimb-2100 are partly based on chemicals with enough energy (vapor pressure) to release the active anticorrosion molecules from the film and out in the environmental air to protect the metal packed from corrosion. Extrusion of polyethylene film with sp-vcimb-2001 will produce a finished product that combines the properties of polyethylene resin and the vci which will solve the corrosion problems. It is available with color pigment as well as without color pigment. Without color pigment master-batch, the film will give transparent bluish-green color film White 1*1mm
Masterbatch.
This masterbatch is based on Exothermic blowing agent which is properly dispersed in a polyolefinic resin along with some specialty chemicals which helps in creating a very fine cell structure in Rotomoulded LLDPE tanks. Since our Roto foam masterbatch is in pulverized form and hence there is saving in pulverization cost to our customer.
Generally powdered pigments have aggregates and agglomerates which can not be further broken down into primary particles by milling process. In M.G.Polyblends Micro colour PVC master batch, the pigments is dispersed to the finest possible particle size by using specialty dispersant and additives under strict process conditions. This Micro colour PVC master batch gives excellent dispersion in final applications.
In general, normally available pet based masterbatches does not give proper dispersion during the manufacturing of bigger size pet bottles. These masterbatches adversely affect the i.V of the resin and hence there is variation in thickness of the bottles. Separation of layers is also observed which decreases the strength of the bottles. To avoid these drawbacks, m.G.Polyblends has successfully developed a colour masterbatch which consists of pet compatible low molecular weight polymer as a carrier resin along with some specialty dispersing agent, processing aid and stabilizer. This masterbatch has no effect on the i.V value of the polymer and hence there is no variation in the thickness as well strength of the bottles.
Rotofoam masterbatch based on Exothermic blowing agent. This blowing agent is properly dispersed in a polyolefinic resin along with some specialty chemicals which helps in creating a very fine cell structure in Rotomoulded LLDPE tanks. Since our Roto foam masterbatch is in pulverized form and hence there is saving in pulverization cost to our customer. Appearance : White polymeric pulverized powder Carrier resin : Polyolefin Properties Very fine cell structure. Better surface appearance. Direct dosage in final formulation. Recommended dosage : 30-80% of the weight of foamed /middle layer polymer or adjust it as per your requirement Recommended processing Temperature : 190- 230 degree centigrade. Applications : Rotomoulded LLDPE tanks
We are professional black masterbatch manufacturer(carbon black from 20%-50%). Kraft paper bag, 21kg/bag.
Product introduction The black master batch e051series developed by our company is processed by adopting special imported resin, top-grade carbon black, dispersant, lubricant etc via advanced mancraft. The product provides the following characteristics: carbon black content is up to 50%, nontoxic, no odor, excellent in dispersing ability, strong coloring strength, strong ability in resisting heat, excellent ultra-violet shielding capability etc. It has been widely used in the micro-plastic film, leakage proof film, milk film, water-supply pipe, cable sheath etc and other plastic products basing on pe pp eva ps abs. The product has passed the tests of china national center for test of chemical building material, qilu sinopec resin institute, test center of shandong plastic industry, and shandong sanitation prevention center, and been certified by sgs and conforms to european standard. The product is recommended by the ago-plastic film experimental team of the 9th five torch plan. Technical index 1outline3*3mm, smooth surface. 2carbon black content50% 3melting index mi(g/10min) >=250 4 water contentvolatile%0.15 5heat resistantí²class 4 6transfer resistantí²class5 7coloring strength101% Using method: mix evenly according to certain ratio. Ratio reference1%--4%, which could be adjusted by the user. Packing: 25kg/bag. Storage: store in dry and ventilated warehouse Paper plastic bags
Product introduction The white master batch developed by our company is processed by adopting special resin, top-grade titanium white powder, dispersant, lubricant etc via advanced mancraft. The product provides the following characteristics: titanium white powder content is high, white, nontoxic, no odor, excellent in dispersing ability, not easy to become yellow, little adding ratio, convenient in using etc. It has been widely used in the milk film, cast film, tube, injection plastic, pipe, and other plastic products basing on pe pp eva ps abs. The product has passed the test of shandong center for disease control and prevention, and been certified by sgs, and conforms to european standard. Technical index 1outline3*3mm, smooth surface. 2titanium white powder content30%--70% 3melting index mi(g/10min) >=230 4water contentvolatile%0.15 5heat resistantí²class 4 6transfer resistantí²class4 7coloring strength102% Using method: mix evenly according to certain ratio. Ratio reference1%--4%, which could be adjusted by the user. Packing: 25kg/bag. Paper plastic bag
Product introduction This color master batches a kind of coloring agent processed by adopting polyolefin carrier, dye, dispersant via special mancraft. It is applicable for the coloring of membrane blowing, injection molding, draw blench, hollow molding, coating film, extubation, foaming for the plastic products basing on ldpehdpelldpepp. It is good in dispering, resiting heat, resisting transfer, color, plasticizing and convenient in using etc. Using method: mix evenly according to certain ratio. Ratio reference1%--4%, which could be adjusted by the user. Technical index 1outline3*3mm, smooth surface.. 2melting index mi(g/10min) >=250 3water contentvolatile%0.3 4heat resistant160240 5transfer resistantí²class 4 6 special specification is available Packing: 25kg/bag. Storage: store in dry and ventilated warehouse. Paper plastic bags
Improve the surface brightness , reduce the remaining materials, avoid the melt fracture, reduce the rupture of membrane , etc. Lot size: manufacture as your requirement
The exclusive resin for casting film ;imported titanium dioxide; strong hiding cover-ness;good dispersion;high peeling strength Detailed description extensively used on ldpe casting film , ldpe + pp casting film, pp casting film. Usage: The exclusive resin for casting film ;imported titanium dioxide; strong hiding cover-ness;good dispersion;high peeling strength Detailed description: extensively used on ldpe casting film , ldpe + pp casting film, pp casting film. Usage: Paper plastic bag
It provides good capacity in anti static, heat stability, compatibility and processing, and has been widely used in the products basing on pe, pp etc and reduces the surface resistance to 108-1012ohm. Using method Mix evenly according to certain ratio. Reference ratio The suggested percentage is 3%-5%, which could be adjusted by the user according to practical situation. Anti-static measuring Excellent anti-static ability acts when the anti-static agent moves to the surface of the plastic product, which needs several days. So measuring should be done several days later the plastic product being manufactured. In addition, the anti-static ability could be influenced by the storing environment, the anti-static ability acts better when in damp environment. Packing: 25kg/bag Storagestore in dry and ventilated warehouse avoiding damping and sunshine Paper plastic bags
Composition Rutile tio2 content 40, 50, 60 ¦ 2% Carrier = polyolefin Discription White masterbatch cl 107 is a white low density polyethylene based masterbatch consisting of rutile grade titanium dioxide designed for economic film products. Main application Cl 107 is especially designed pigmented white filler masterbatch for economy blow-film and injection plastic requirements. Cl 107 promotes not only excellent white pigmentation and opacity, but also as a cost down material in plastic industry. Cl 107 is designed for lldpe, ldpe, hdpe, pp, ethylene copolymers. Specification ò Density (23oc) : 1.62g/cm3 ò Melting flow index : 15g/10min (2.16kg/190oc) ò Melting point : 110oc ò Moisture content :
Uv stabilizer for plastics, rubber processing 25 kgs/bag
Product introduction The black master batch e051series developed by our company is processed by adopting special imported resin, top-grade carbon black, dispersant, lubricant etc via advanced mancraft. The product provides the following characteristics: carbon black content is up to 50%, nontoxic, no odor, excellent in dispersing ability, strong coloring strength, strong ability in resisting heat, excellent ultra-violet shielding capability etc. It has been widely used in the micro-plastic film, leakage proof film, milk film, water-supply pipe, cable sheath etc and other plastic products basing on pe pp eva ps abs. The product has passed the tests of china national center for test of chemical building material, qilu sinopec resin institute, test center of shandong plastic industry, and shandong sanitation prevention center, and been certified by sgs and conforms to european standard. The product is recommended by the ago-plastic film experimental team of the 9th five torch plan. Technical index 1outline3*3mm, smooth surface. 2carbon black content50% 3melting index mi(g/10min) >=250 4 water contentvolatile%0.15 5heat resistantí²class 4 6transfer resistantí²class5 7coloring strength101% Using method: mix evenly according to certain ratio. Ratio reference1%--4%, which could be adjusted by the user. Packing: 25kg/bag. Storage: store in dry and ventilated warehouse
Our company can produce various color mb for your diffferent resin products, such as pp, pe, abs, eva. Usage: the additive ratio is 2%-4%. Package: 25kg/bag Stock and delivery:no danger products and stock in the ventilated and dry warehouse
