Silicone masterbatch lysi-07 is our new product which dispersed in pa6 with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil as the additives, and it has large silicone content, ultra-high molecular weight, no precipitation and not slipping in the screw extruder and so on. Typical performance: Name: lysi-07 Appearance: white pellet Silicone content: %40 Resin base: pa6 Dosage: %0.5-10 Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling mold release and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture, scratch resistance and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength. Lower surface energy and improve the hydrophobic properties. Good stability, non-migratory and surface without precipitation. Applications: Pa series materials ( to improve flow ability, mold release, floating fiber ) Use methods: Drying the lysi-07 at 80-120fª about 4 to 5 hours, mixed with pa equally, then injection or extrude it to pellet. Or mix the lysi-07 and pa resin first, then molding after dried. Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 10% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). Added level at 2% to 5% is effective to improve the abrasion resistance, abrasion reduction to 30% to 80% 25kg/bag