Chengdu Silike Science & Technical Co., Ltd.

Silicone powders lysi-100 is our new product of ultra-high molecular weight (uhmw) silicone plastic additives without any resin carrier. It overcomes the weakness of traditional silicone oil as the plastic additives. And it has a large silicone content, ultra- high molecular weight, no precipitation, not slipping in the screw extruder and so on. Typical performance: Name : lysi-100 Appearance: white powder Silicone content: 70% Dosage: 0.5-2% Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture f+¼a+ scratch and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength and surface gloss of fuel resistance (high filling) materials Good stability, non-migratory and surface without precipitation. Typical applications: Modification of plastics, cable materials, elastomers, thin-walled complicated parts, silicone core pipe and so on. For pa , pc, pps high temperature engineering plastics, can improve the flow of the resin and processing properties, promote the crystallization of pa, improve the surface smoothness and impact strength. . Use methods: Lysi-100 mixed with the resin at a certain proportion, then molding or pelleting directly. Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). 25kg, paper bag

The product is a high molecular weight polymer which independently developed by our company with special arts and crafts, adding a small amount to the thermoplastic can significantly improve the productf+s abrasion resistance and reduce the coefficient of the fraction. At the same time, the flow ability of resin, processing performance and surface glossiness are improved as well. Features: 1.Cost-effective, small amount addition, outstanding abrasion resistance properties The product produced with special arts / crafts and high technology. On the todayf+s market, 2~3% addition of our products can achieve the same level as the 5~10% addition of traditional agents. Even if the customer has a near-stringent requirements of abrasion resistance, our products can help you to meet their needs. With our products, whether your product are used in running shoes, basketball shoes or the various professional sports shoes , you do not need to worry about the wearness. 2. Environmental protection This product doesnf+t contain lead, mercury, chromium and other heavy metals, it is fully in line with eu sgs certification requirements. At the same time, it is has good thermal stabilities, no smoke produced during the processing. Especially suitable for the customers who have requirements of environmental protection. 3. Will not change the productf+s hardness The hardness always increased after the traditional abrasion agents added, easily make the folding resistance decreased. While our product doesnf+t affect the basic mechanical properties of the original product. 4. No affect on color Other homemade abrasive products often make the color darner, even to black. Seriously affect the appearance of the product. But our product is a high molecular polymer which is very stable under high or low temperature and will not affect the original color during processing. 25kg/bag

Silicone masterbatch lysi-08 is our new product which dispersed in pet with ultra-high molecular weight (uhmw) silicone content. Compared with traditional silicone additives, processing and weighing are more convenient, improving the appearance and surface properties are more obvious and the impact on the printing and coating are much smaller. Typical performance: Name: lysi-08 Appearance: white pellets Silicone content:40% Mi: 35 Features: Add a small amount (0.3%f¼2%), can enhance the flow of the pet and processing properties, better mold filling, less extruder torque, mold release and faster throughput; addition level at 1% to 5%, can further improve the surface properties and appearance of the products. Including lubricity, lower coefficient of fraction, better abrasion and scratch resistance. Reduce the surface energy consumption, improve the hydrophobic and anti-sticky properties. Application examples For bopet film with excellent smoothness under high temperature, and do not precipitate. For pet sheet to improve processing, appearance, scratch resistance and anti-adhesion properties For wire-drawing industry, to improve the appearance and feeling of wire-drawing, reduce breakage, improve abrasion resistance, lower surface energy and improve the hydrophobic properties For pet injection molding, to enhance the flow of the product, improve the product surface smoothness, abrasion resistance, scratch resistance, faster throughput and appearance. How to use: Lysi-08 mixed with pet equally. Drying it under 110-150f¦ before use. Or dried lysi-08 mixed with dried pet equally first, than extrusion or molding. Packaging and storage The product is a non-dangerous good, paper bag, 25kg/bag, avoid high temperature and rain when storage. The usable life is 48 months from the date of production under the cool room temperature. 25kg/bag

Silicone masterbatch lysi-06 is our new product which dispersed in pp with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil easily to screw slip. A small amount addition can improve the flow of the resin and processing properties. Now it is widely used to improve the lubricity and surface properties of plastic. Typical performance: Name: lysi-06 Appearance: white pellet Silicone content: %50 Resin: pp Dosage: %0.5-10 Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, gloss·+ enhance the surface silk texture, scratch and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength . Good stability, non-migratory and surface without precipitation. Applications: (1) Pp packaging film (2) Automobile interior trim materials pp/talcf=tpo ( to improve scratch resistance and surface properties ) (3) Bopp, cpp films Use methods: Lysi-06 mixed with its compatible resin at a certain proportion then molding or pelleting directly Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, scratch resistance and abrasion resistance). 25kg/bag

Silicone masterbatch lysi-07 is our new product which dispersed in pa6 with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil as the additives, and it has large silicone content, ultra-high molecular weight, no precipitation and not slipping in the screw extruder and so on. Typical performance: Name: lysi-07 Appearance: white pellet Silicone content: %40 Resin base: pa6 Dosage: %0.5-10 Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling mold release and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture, scratch resistance and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength. Lower surface energy and improve the hydrophobic properties. Good stability, non-migratory and surface without precipitation. Applications: Pa series materials ( to improve flow ability, mold release, floating fiber ) Use methods: Drying the lysi-07 at 80-120fª about 4 to 5 hours, mixed with pa equally, then injection or extrude it to pellet. Or mix the lysi-07 and pa resin first, then molding after dried. Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 10% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). Added level at 2% to 5% is effective to improve the abrasion resistance, abrasion reduction to 30% to 80% 25kg/bag

Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities

Plastic Masterbatch as per pantone and RAL shades

Dep=di-2