20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.
CORON 20W-50 Engine Oil 1.2 L is synthetic engine oil. Vehicles need the best engine oil to give their engines running smoothly. Package is 20 Pcs X 1.2L.
CORON 15W40 4-stroke (4T) engine oil formulated by superior quality base oils and specially selected performance additives to provide excellent protection for engine, gearbox and wet clutch of 4-stroke two wheelers- Royal Enfield/Jawa and similar segments. Reduces vibration and damping engine noise. High viscosity index ensures viscosity consistency under High-RPM, High and low Temperature conditions, improves wear protection. These ensure engine protection and increases Engine Power. These oil meet the requirements of leading global 4-stroke two wheelers manufacturers.
The oil is applied to four-stroke engines of motorcycles, scooters, all terrain vehicles and other motor equipment.
Specially designed for modern high-powered four-stroke engines of motorcycles operated in loaded modes (high speed, durable maximum and/or dynamic loads).
Effective for engines with integrated (or separate) transmissions.
Ensures smooth gear shifting and reliable operation of the clutch in the oil bath.
Due to enhanced detergent properties, the oil keeps the engine perfectly clean.
8143 Lubricants Suppliers
Short on time? Let Lubricants sellers contact you.
CORON 15W-40 is the most advanced High-Lubricity Motor Engine Oil Specially Formulated and Tested For the
Latest High-Performance Diesel Engines With Seal Guard Technology and Exhaust After Treatment System.
Long-term oxidation stability. Maximum Resistance at High Temperatures.
It is suitable for lubrication of various friction parts such as bearing of metallurgical rolling machine, bearing of refractory equipment kiln car, casting sand falling machine, chemical roasting, mechanical processing and heat treatment, printing and dyeing roasting machine, paper dryer, rubber, plastic hot rolling and cement industry equipment.
Worked Cone Penetration,0.01mm : 265-295
Dropping point :245 degree Celsius min
operating temperature: -20 - 220 degree Celsius
the leading lubricant manufacture with 32 years history , Our grease and oil production capacity is 100,000 tons/year.
It is suitable for lubrication of hub bearing and chassis parts of high-speed passenger cars and heavy-duty trucks under harsh conditions such as high temperature and heavy load, and lubrication of metallurgical equipment and construction equipment.
Product main specification as below:
Worked Cone Penetration,0.01mm : 265-295
Dropping point :260 min
operating temperature: -20 220
Worked Cone Penetration,0.01mm : 220-250
Dropping point :194 min
operating temperature: -20-120
Suitable for the lubrication of rolling bearings, sliding bearings and other friction parts of various mechanical equipment in the temperature range of -20 120
Features and benefits
Ensures consistent friction between threads
Protects against galling and seizure
Protects against rust and corrosion
Eases assembly of tight tolerance components
Withstands extreme temperature
Appearance
Yellowish paste
Ingredient
PAO
Thickener
Lithium complex
NLGI
2#
Work penetration,25C 0.1mm
265~295
Drop Point
180
Run off(99C 22h),%
0.3
Oil separation 100/24h, %
4.6
Corrosion test of copper sheet(1003h)
Qualified
Work temperature
-40~150C(-40~115F)
Appearance
Black paste
Ingredient
PAO
Thickener
Inorganic
NLGI
2#
Work penetration,25 C 0.1mm
265~295
Drop Point
/
Run off(99C 22h),%
1.1
Oil separation 100 /24h, %
2.8
Corrosion test of copper sheet(1003h)
Qualified
Work temperature
-40~300 C(-40~197 F)
Appearance
Copper paste
Ingredient
Synthetic oil
Thickener
Inorganic
NLGI
1.5#
Work penetration,25 C 0.1mm
295~310
Drop Point
/
Run off(99 C 22h),%
0.9
Oil separation  100 /24h, %
4.0
Corrosion test of copper sheet(100 3h)
Qualified
Work temperature
-40~600 C(-40~365 F)
Appearance
Transparent
Ingredient
Silicone oil
Thickener
Inorganic
NLGI
2#
Work penetration,25 C 0.1mm
265~295
Drop Point
/
Run off(99 C 22h),%
1.2
Oil separation  100 /24h, %
4.0
Corrosion test of copper sheet(1003h)
Qualified
Work temperature
-50~200C(-58~143F)
Appearance
White paste
Ingredient
Mineral oil
Thickener
Lithium soap
NIGL
2#
Work penetration,25 C 0.1mm
265~295
Drop point
190
Run off(99 C ,22h)%
1.2
Oil separation@100 C/30h)
3.9
Copper strip corrosion(200 C,30h)
Qualified
Operating temperature
-25~140 C(-13 ~110 F
Appearance
Yellow paste
Ingredient
Mineral oil
Thickener
Lithium soap
NIGL
2#
Work penetration,25 C 0.1mm
265~295
Drop point
190
Run off(99C ,22h)%
1.2
Oil separation@100C/30h)
3.9
Copper strip corrosion(200C,30h)
Qualified
Work temperature
-25~140C(-13~110F
EXCEL PREMIUM 4T 20W-50 is an unique semi-synthetic 4-stroke lubricant designed for modern high-speed air-cooled 4-stroke motorcycles. Its semi-synthetic technology provides exceptionally good wear protection to engine parts by reducing friction inside the engine operating under severe conditions where conventional 4-stroke lubricants fail to perform
8143 Lubricants Suppliers
Short on time? Let Lubricants sellers contact you.
