Injection packer is a must in chemical grout used for injection of epoxy and polyurethane foam into holes penetrated at a pressure higher than 20kg/cm(max. Pressure 500kg/cm) on to concrete structure. The injection packer is a tool for sealing works. It is tightly fixed in the drill hole of the building component and connects the injection device with the building. Under pressure the sealing material is injected into the damaged building component. Packers are made of different materials such as steel or plastic and various types of packers are available. The head is provided with a one-way valve, can prevent the slurry at high pressure into the pour spout. It is widely used with high pressure grouting machine.
BDLF Stucco Sprayer Hopper Gun can be used for plastering a stucco house, traditional plastering of stucco such as one coat or three coat stucco or GFRC. The range is from 1/8" heavy texture to 1" thick structural layers. It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, cement, concrete, papercrete, earthen mixes and more. Hopper made from stainless steel material, with a life time anti-rust guarantee. Will spray: Sand /Cement Slurries, plaster spray products, Grout, GFRC, GFRG Monokot Mk-6, Cafco-300, and other Fireproofing materials. For best performance we recommended to use 12 cfm @ 100 psi (340 liter@ 7 bar) gas power or electric air compressor, with 15 to 30 gallon (60-114 liter) air tank. We also include additional 4 brass air jet to use with small air compressor that delivers only 4-6 cfm @ 90 psi. Hopper includes with 2 cover bolts that allow you to plug one or two holes at the tip for narrow spraying capabilities.
HDPE/MDPE pipe extrusion line designed by our company selected special extruder and adopted computer control. The screw has barrier unit and special material mixing components and barrel has new style grooves that achieve good plastication and mixing effect. The complete line assured great output and stable production. In addition, this line is equipped with special extruder for marking line of PE pipes.The extrusion line adopts the most advantaged spiral and lattice die head in the world, which assured stable extrusion in production process. In order to fit the performance of PE material and assure high production speed, we adopt water film lubricating and water circulation cooling. It has ellipse rectify device when producing huge diameter pipes. It has special designed vacuum and cooling devices that make good effect of huge diameter pipes extrusion.Haul off machine adopts three and six pedrails with European speed control system makes hauling stable and reliable. Cutting adopts planetary saw.
Qingdao HUASU Machinery Fabricate Co Ltd designs and develops HDPE MDPE water supply pipe production line and gas pipe production line by itself. its have many features, such as special structure, high degree automation, easy operation, continuous produce stable and reliable and so on. It is also applicable for high speed extrusion of PE PP PPR, PERT ABS etc. Plastic Pipes that are produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat- linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. With a concept of Win By Technology , HUASU is willing to supply great quality and fine finished Double Wall Corrugated Pipe Machines and other plastic pipe extruder to both domestic and foreign customers. We struggle for helping our customers to win maximum profit with high technology and amusing efficiency products. HUASU Company is willing to develop and cooperate with customers from all over the world hand in hand for the bright future. Main Product 1HDPE Double Wall Corrugated Pipe Extrusion Line ( 32- 1200mm) 2UPVC Double Wall Corrugated Pipe Extrusion Line ( 38- 1000mm) 3HDPE Water Supply/Gas Distribution Pipe Extrusion Line ( 16- 1200mm) 4PVC Rigid Pipe Production Line ( 16- 630mm) 5HDPE Huge Calibre Hollowness Wall Spiral Pipe Production Line ( 200-
Usgae and Technology Index of Product The Magnesium board is made of filling materials ,such as sawdust and all kinds of crushed plant straw (you can select any one kind )and several chemical raw material which are token as modified material after special technology .the board has such features:quickly hardening ,high strength ,large-format ,fireproof ,damp-proof and good waterproof performance.It can be nailed ,planed and stuck,so it can be used widely at indoor decoration ,such as wall skirting and ceiling of market,hotel,club ,station ,office building and living room and it also can get large usage at top-grade furniture,door and partition .this product is made from wasteb materials,and it is ideal product which can replace all kinds of wood board with reasonable price and good quality. Equipment parameters:Description Raw material :Mgo/mgcl2/fiber glass mesh Texture of material :steel Automatic degree :Fully/semi automatic Finsihed board size :Thickness:2-25mm,unlimited length ,width:1300mm Color :Blue ,red,etc Capacity :Maximum 2000 sheets/shift(8 hours)
The strengthened mould plate with this technology can replace steel mould board ,bamboo&wood mould board and multiayer board .Being a high-profit product ,this board is applied widely in all kinds of concrete engineering with low-cost,high strength,long life and convenient to use .the board is high-profit product
Material: PET scraps Color:Green,black Width:9.5-25 mm Thickness:0.55-1.20 mm Broken strength(N):2000-13000 Weight: 20 kg per roll Other data is according to clients' requirement to make straps.
This machine with multi-function, it can process bone, peanut, sesame, nuts, cacao beans, fruit and vegetables to make them into butter/paste. It can named tahini making machine, peanut butter making machine, or nuts grinding machine , bone grinder machine etc. Features: Grinding machine is my company for peanuts, sesame seeds, walnuts , bone, meat and other crops with high oil content body butter processed a food specifically developed special machines, its shape with the same basic chemical used in a colloid mill.
Electrical discharge machine Daegun technology constructs wire-cut edm technology facilities in order to produce about 100 of wire-cut edm annually, and secures specialty and skills for stable and precision for producing high-precision and deposition wire-cut edm. The high-precision and deposition wire-cut edm is a special tool machine is good at not only precision section processing such as punch, die, up and down different shape, taper, reiteration, but also high-precision processing such as innovative improvement of external roughness. The wire-cut edm business part at daeguen technology is able to manufacture all parts of edm ourselves as assembly, control box assembly, wiring, and wire harness.
Since 2010, DAEGUN Constructs The Best Setting For Industrial Equipment (Chip Mounter, Next Generation Chip Mounter For LED Only, And Screen Printer) And BIO / Medical Equipment. Currently, DAEGUN Strongly Grows Up In Order To Produce 80 Chip Mounter Monthly, For The Future, We Promise To Supply Precision And Stable Equipment To Customers With Technique Improvement And Effort. Producing Industrial Equipment Screen PrinterSP1?SMP400S Chip MounterSCM1?SM411?SM411F?SM421?SM431?SM431L?SM451?SM471
1.Using imported original compressor, condenser good performance, high speed, long life, energy efficient, long-lasting power. 2.The refrigeration system uses the high quality brass, three times life than the general commander. 3.Extensive raw materials for a variety of sugary liquid, ice cream raw materials, various fruit juices, milk, soy milk, coffee, soup, soda water, cola, and so on. 4.It can be easy to make thai soft and hard ice cream roll, ice, ice, mud, snow and ice, fruit ice, ice porridge, fruits, and so on. 5.The body panels made of stainless steel, beautiful appearance, body with thick steel plate, durable 6.With the deepening of thick stainless steel pot made of steel shovel fried ice directly, saving time and effort 7.The machine has a steering wheel equipped with a universal, easy to move, with a grounding wire device to prevent shock sensors. 8.The machine is equipped with a voltmeter, power switch, switch refrigeration; defrost switch, showing its economic and practical, to ensure the normal operation of the machine. 9.Imported solenoid valve, defrost faster. High-speed fan, cooling fast.
Galvanized steel floor deck roll forming machine for making steel structure floor decking panel Main specification Material spec: galvanized steel sheet Thickness of coil sheet: 0.8 --1.2 mm Main motor power: 18.5kw Forming speed: 10--12m/min Hydraulic station power: 4kw Hydraulic pressure: 10~12mpa Controlling system: plc Index error of length: 10m±1.5mm Voltage: 380v 3 phase 50hz or at buyers requirement Material width: 1250mm ( depend on profile ) Decoiler: 5 ton decoiler ( manual or hydraulic type ) Roller stand: about 22-28 stations ( depend on final design ) Shaft diameter: f80mm Cutting power: 7.5kw Plc brand: panasonic brand Encoder: omron brand Inverter: yaskawa brand Touch screen: mcgs brand
Plc control deck roll forming machine for floor decking panel, metal decking sheet Main specification Material spec: galvanized steel sheet Thickness of coil sheet: 0.8 --1.2 mm Main motor power of floor decking roll forming machine: 18.5kw Forming speed: 10--12m/min Hydraulic station power: 4kw Quantity of stands: about 24 groups Hydraulic pressure: 10~12mpa Controlling system: plc Index error of length: 10m±1.5mm Total weight: about 1800kg Voltage: 380v 3 phase 50hz or at buyers requirement
High precision steel structure floor deck roll forming machine for metal decking sheet Main specification Material spec: galvanized steel sheet Thickness of coil sheet: 0.8 --1.2 mm Main motor power of floor decking roll forming machine: 18.5kw Forming speed: 10--12m/min Hydraulic station power: 4kw Quantity of stands: about 24 groups Hydraulic pressure: 10~12mpa Controlling system: plc Index error of length: 10m±1.5mm Total weight: about 1800kg Voltage: 380v 3 phase 50hz or at buyers requirement
Our company specializes in used shoe-making machine, Atom swing arm cutting machine, such as mod se20, se20c, mf20, se15, vs 922 and so on.
A dual lead worm gear is suitable for use to precision machinery And auxiliary to maintain precise revolution and equal deviation. It is precision and technology intensive gear.
24 forming station decking floor roll forming machine with plc control system Main specification Material spec: galvanized steel sheet Thickness of coil sheet: 0.8 --1.2 mm Main motor power of floor decking roll forming machine: 18.5kw Forming speed: 10--12m/min Hydraulic station power: 4kw Quantity of stands: about 24 groups Hydraulic pressure: 10~12mpa Controlling system: plc Index error of length: 10m±1.5mm Total weight: about 1800kg Voltage: 380v 3 phase 50hz or at buyers requirement
24 forming station decking floor roll forming machine with plc control system Main specification Material spec: galvanized steel sheet Thickness of coil sheet: 0.8 --1.2 mm Main motor power of floor decking roll forming machine: 18.5kw Forming speed: 10--12m/min Hydraulic station power: 4kw Quantity of stands: about 24 groups Hydraulic pressure: 10~12mpa Controlling system: plc Index error of length: 10m±1.5mm Total weight: about 1800kg Voltage: 380v 3 phase 50hz or at buyers requirement
1.Brief introduction This polypropylene pearl films tensile testing machine is to measure tensile strength and elongation at break of polypropylene pearl films( films of single surface heat and both surfaces heat, films of non-heat). 2.Sample Mateials of polypropylene pearl films include main material polypropylene resin and a certain amount of pearl materbatch. By the biaxial orientation tensile with method of membrane, so the polypropylene pearl films is made. When measuring its tensile strength and elongation at break, a sample with size 150x15mm±0.1mm should be taken from the whole film and then load tensile force to the sample with a speed of 250mm/min±10mm/min. 3.Technical specification of testing machine 1 Model Wtd-w1/w2/w5 2 Max. Capacity 1000n/2000n/5000n 3 Grade Grade 1 4 Measuring range 1%-100%fs 5 Relative error of indicating value ±1% 6 Force resolution 1/±300000fs 7 Displacement measuring range 0.2%-100% 8 Load speed range 0.005%-5%fs/s 9 Load speed precision When speed is less than 0.05%fs, precision is within ±1% When speed is more than 0.05%fs, precision is within ±0.5% 10 Deformation speed range 0.005-5%fs/s 11 Deformation speed precision When speed is less than 0.05%fs, precision is within ±1% When speed is more than 0.05%fs, precision is within ±0.5% 12 Displacement speed range 0.001-500mm/min 13 Displacement speed precision Within ±0.2% of set value 14 Range of constant load control, constant deformation control, constant displacement control 0.5%-100%fs 15 Precision of constant load control, constant deformation control, constant displacement control When set value is more than 10%fs, precision is within ±0.5% of set value When set value is less than 10%fs, precision if within ±1% of set value 16 Stroke of crossbeam 1000mm 17 Voltage 220v±10%, 50hz(should connect to the ground) 18 Power 400w 19 Dim. Of load frame 415x415x1650mm 20 Over weight of product 150kg
Melt flow indexer is used to indicate the mfr, the mvr and the melt density of thermoplastic resin. It can be operated on engineering plastics with high temperature such as polycarbonate and the plastics with low temperature such as, polypropylene, abs resin and acetaldehyde resin. They are used widely in plastic production and petrochemical industry, and also in some academy and commodity inspection department.
