Films Tensile Testing Machine

Plastic Film Tensile Test Machine is suitable for testing the peel force, heat seal strength, tearing resistance, deformation, puncture resistance, open force, low speed unwinding force of plastic film, composite film, soft packaging materials, adhesives, rubber, paper fiber and other products.

Features
More convenient design-Touch Interface.
The screw driving system greatly improves the accuracy of the displacement and can realize the continuously variable transmission.
The process of measuring maximum value, average value and real-time value is fully intelligent.
The test results can be outputted for group statistical analysis.
Over-load and emergency power-off protection assure the safety.
Equipped with micro-printer and USB interface,
Multiple selection of units: N (Newton), KN\m, lbf pounds, g (gram force).
The instrument is compatible with ISO, JIS, ASTM, DIN and other related international standards.

Principle
The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber.

Standards
ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, GB/T 13022, GB/T 8808, GB/T 1040, GB/T 4850, GB/T 7753, GB/T 7754, GB/T 453, GB/T 17200, GB/T 16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358, QB/T� 1130

Technical Specifications
Test Range 200N (Optional 30N, 50N, 100N)
Accuracy 1%FS
Width of Sample 50mm (Standard)
Test Speed 1-500mm/min (Adjustable)
Stroke 600mm
Dimension 450mm (L) 580mm (B) 1100mm (H)
Power Supply AC 220V 50Hz
Net Weight 50 kg

Configurations
Standard: Instrument, Universal Grips, Micro-Printer.
Optional: Computer, Professional Software, Communication Cable, Standard Roller, Test Plate, Sample Cutter, Clamps for Floating Roller, Low Speed Unwinding Device.

Tensile Tester TST-01 is used to test the mechanical properties of various materials such as stretching, tension, tearing,peeling, deformation, seal strength, adhesiveness, puncture force, etc. It is suitable for plastic films, sheets, composite materials, paper, rubber, textiles, medical packaging, etc. It's specially designed for plastic film testing by standard ASTMD882.

Tensile testing Machine

Advanced Tensile Test Machine specializes in testing the mechanical properties of various flexible packaging materials. It is mainly used to test the heat seal strength, tensile strength, peel force, elongation of pharmaceutical packaging materials, aluminum foil, PVC hard sheet, composite film, syringe and other products.

Features
Touch interface-more convenient design.
Diverse testing modes are getting to meet various requirements.
The measuring system is innovated in high-precision, good-linearity and fast -response.
Unique function-sensors over-range protection.
Precise multi-positioning technology drives system to run stably.
Intelligent configuration (limit protection, over-load protection, automatic re-position and power-down memory) ensures the safety of users and the instrument itself.
Auto-zeroing calibration after power-on.
The curve of data synchronously shows the changing trend of force value during the test.
The instrument complies with GMP management of user's three-level authority.
The records of data can be queried, audited and tracked.
Analyze data statistically in single and group.
The micro-printer facilitate to get paper-data.
Equipped with standard USB interface.
Specialized communicating software can be used for real-time display, data analysis and storage.
Pneumatic clamp saves operational time and manipulate fluently.
The data can be uploaded to the cloud server directly by internet interface and the global remote query can be realized.

Standards
ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, GB/T 13022, GB/T 8808, GB/T 1040, GB/T 4850, GB/T 7753, GB/T 7754, GB/T 453, GB/T 17200, GB/T 16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358, QB/T 1130, YBB00152002-2015, YBB00212005-2015, YBB00232005-2015, YBB00222005-2015, YBB00182004-2015, YBB00202005-2015, YBB00242002-2015, YBB00212004-2015, YBB00132005-2015, YBB00142005-2015, YBB00152005-2015.

Technical Specifications
Force Range 500 N (Standard)
30N, 100 N, 1000N, 1500 N (Optional)
Accuracy 0.5%FS
Resolution 0.01N
Accuracy of Displacement 0.5%FS
Resolution of Displacement 0.1mm
Test speed 0 ~ 800mm/min (Adjustable)
Sample's Width 50mm (Normal)
30mm (Optional)
Clamping Way Pneumatic
Stroke 1000mm
Dimension 540mm (L)�?450mm (B)�?1560mm (H)
Net Weight 72 kg

Configurations
Standard: Instrument, Micro-Printer, Pneumatic Clamp, Professional Software and Communication Cable.
Optional: Standard roller, test plate, sample cutter, clamp for breaking force, clamp for combined cover opening force, tensile clamp, clamp for needle puncture force, clamp for sliding, clamp for sealing body, clamp for heat sealing strength, clamp for connecting force, clamp for pull-out force, clamp for full-open force, etc.

3. Main technical indicators:
1. Maximum test force: 5000N
2. Test force display range: 10N~5000N
3. Test force grading: no grading throughout the entire process
4. Test force measurement accuracy: better than �± 1% of the indicated value
5. Displacement resolution: 0.01mm
6. Displacement measurement accuracy: better than �± 1% of the indicated value
7. Cross beam movement speed control range: 0.05mm/min~500mm/min
8. Displacement speed control accuracy: better than �± 1%
9. Stretching stroke: 0-850mm
10. Overall dimensions (length Ã?? wide Ã?? Height: 450mm Ã?? 450mm Ã?? 1360mm
11. Power supply: 220V, 50Hz

This machine is widely used for the inspection and analysis of metals, non-metals, and various composite materials. It is an ideal testing equipment for scientific research institutions, vocational colleges, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments, etc.

4.Main technical parameters
4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional)
4.2. Unit switching: kg, N, LB
4.3. Load decomposition degree: 1/250,00
4.4. Load accuracy: 0.25%
4.5. Maximum stroke: 1000mm (excluding fixtures)
4.6. Test speed: 30-300 mm/min
4.7. Displacement resolution: 0.01 mm
4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.)
4.9. Motor: AC motor
4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm
4.11. Weight: 80kg
4.12. Power supply: 1 , 220V, 15A or specified
4.13. Delivery: One set of tension fixtures
5. Introduction to System Functions
5.1. It has tensile and pressure testing functions.
5.2. It has a pull stop function.
5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines.
5.4. There is an automatic stop alarm function for overload load setting.
5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times.
5.6. Use a list format to display the saved test data.
5.7. With an administrator password, users can modify their startup password to make machine management more secure.
5.8. Using software to calibrate the load value is extremely easy to calibrate.
5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple.
5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc.
5.11. Display method: Real time display on the touch screen.
5.12. Tensile range: Standard configuration 200kg (optional).
5.13. The accuracy is 1/25000.
5.14. It can print test data and dates, making it easy to view test data for each stage
5.15. Conversion of three types of force units: N, Kg, and LB.
During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed.

7. Introduction
This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc.
8. Design standards
ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc

Technical parameters
Maximum test force 1000kg
Unit of force N Kgf bf N KN
Test accuracy Grade 0.1
Test stroke 2200mmWithout fixture
Print items Save the data and then print, can be converted to PDF document.
Test speed: 0-500mm/min computer Settings
Shutdown mode: Break automatic stop
Control mode PC control
Power source servomotor

High Accuracy Factory Price Elastic Band tester Plastic Bag Polymer Laboratory Mask Elastic Band tensile testing machine

Application

To test the tensile strength, peeling strength, heat sealing strength,tearing strength, piercing strength, compression strength, bending strength, and cutting strength of plastic film, composite film, tape, soft packaging material, rubber sheets, paper, non-woven fabrics and other packaging materials, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute, college and so on.

Standards

ASTM D828,ASTM E4,ASTM D882,ASTM D1938,ASTM D3330,ASTM F88,ASTM F904,ISO 37,JIS P8113,etc.



u With flexible interface and control mode, it can be used for multiple tests such as tensile test, peel test, seal test, tear test, puncture test, compression test, bending test, shear test, etc. Speed, thickness, clamping distance and other parameters can be set.

u The measurement accuracy is high, the test measurement accuracy can reach 0.5 grade.

u Computer controlled; online display of test result, auto data storage and analysis, multiple curves record, zoom in/out, computer print.

u Fully digital control system with imported AC servo system and motor, control displacement with zero drift.

u Using high precision ball screw loading; loading smoothly; long service life of testing machine, long-term stability and energy saving.

u Load/deformation measurement: with multiple sub-channels, multiple sensor extension measurements are available.

u Wide speed range, suitable for high and low speed test.

u Open data structures, both result parameters and procedure data are allowed to use randomly, which is very convenient for users. Self-editing report function, data can be easily imported into Excel table, convenient for data-processing.

u The control measurement unit can be either built-in (simple appearance, space saving) or external (easy to upgrade, maintain and operate independently from the microcomputer);

u With perfect limit protection, overload protection, emergency stop and other safety protection functions. It can make the test run safely and reliably.

u High sampling speed (100 times/s), make test results more accurate.

u Core part is imported, with high precision and durable.

u Double table standing design, easy and comfortable.

u Various clips optional for different test purposes.

u Touch screen, with need new software for elastic modulus.

Max 20KN digital electronic universal testing machine auto tensile testing machine desktop tensile testing machine

Universal Testing Machine
This Series machine can be applied to test lots of materials in rubber
tensile elongation, compression, tear, big size peel (can 90 degrees and
180 degrees) and other mid-force mechanical test 5KN,
10KN,20KN, optional), such as tires, belt, shoes, plastic, film, acrylic,
FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials,
waterproof materials, fibers, textiles, wire and cable, paper, gold foil,
ribbons, thread, spring, wood, medicine packaging materials, tapes etc.

Rubber, PVC, PE, Polymer, Plastic, Metal
1. A) Tensile test: Main test tensile strength
2. B) 3-points bending test: Test material compression

Technical Specifications
Item
Technical parameters
Max load
20KN
Maximum Load
500N, 1KN,2KN,5KN,10KN,20KN optional
Extensometer
Comply with Extensometer (if need, please inform supplier before order)
Control Mode
Force from 0.2% to 100% / from 0.4% to 100%
Weight
350KG
Accurate Grade
1 grade / 0.5 grade
Effective Measuring Range
Force from 0.2% to 100% from 0.4% to 100%
Measuring Accuracy
Load Sensor
Basic configuration sensor max load: one
Power Supply
220V, 50HZ or according to the requirement

We is a professional manufacturer focused on developing
and producing packaging material test instruments. Founded in 2002, the company has received IOS9001 certification and recognized as high-tech enterprise and software enterprise by national authority. We hold numerous technology patents and software certificates from the national authority and gained awards for technological progress.