Find Verified Laser Equipments Products Suppliers, Manufacturers and Wholesalers

Dy-10/dy-13/dy-20 80/100/150w laser power supply for reci 1200/1400/1650/1850mm co2 tube
Dy-10:80w co2 laser power supply for reci s2 80-90w co2 tube
Dy-13:100w co2 laser power supply for reci s4 1000w co2 tube
Dy-20:150w co2 laser power supply for reci s6 or s8 130-150w co2 tube

1. Product features:
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with co2 laser tube made by any factories.
2. This laser power supply is easy to be controlled, it is suitable to high or low level signal. The ttl level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3. The laser output power can be adjusted by 0-5v analog signal or pwm signal.
4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function canprotec power supply when laser tube burst.
2. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.
3. Specification:
Model nody-10dy-13dy-20
Output laser power80-90w100w130-150w
Input ac voltageac220v or ac110v

6040 co2 laser engraving machine 40w 4060 co2 laser engraver
Features
This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.

Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube
Features:
1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube.
2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal.
4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst.
5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.
6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case.

Specification:
Input AC Voltage AC220V or AC110V
Input DC Voltage DC 300V or DC150V
Input AC Frequency 47-440Hz
Max. Output Voltage 40KV
Max. Output Current 28mA(Depends on Laser tube)
Efficiency 91%
Over Current Protection 130% of Max. Current
Open circuitProtection Yes (For short time)
Cooling Fan Cooling
Voltage Range of High Level Control Not Less Than3V
Voltage Range of Low Level Control Not More Than0.8V
Working Temperature -30 - +65 Degree Centigrade
Humidity 20-85%RH(No Dew)
� 
Withstand
Voltage Input-Output AC1500V/MinNot More Than10mA
Input-Shell AC1500V/MinNot More Than10mA
Output-Shell Connected
Insulation Not Less Than 50MOHM(DC500V)
Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)
Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours
MTBF Not Less Than30,000hours
Full Load 60 Degree Centigrade test 12Hours
7 Seconds Start/Stop Test 500 Times
Dimension(LXWXH) 270x160x80mm

BR-60W CO2 POWER SUPPLIES
Feature
1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power.
2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.�  It is very good function for both machine factory and machine users
3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case.
4.This LCD screen CO2� power supply� has� high efficiency and� quick� response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.� 
5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not.
6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time.
6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube.
Specification
lnput�  Input voltage AC220V�±10%� (AC110V specified while order)
AC frequency 47~440HZ
Maximum input power 490W
Maximum input current 2.2A
Output Maximum output voltage 25KV
Maximum output current 28mA
(depending� on the laser tubes of different manufacturers)
Efficiency More than 90%� (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10â??~50â??
Storage of temperature -20â??~75â??
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100,000 feet of work
200,000 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 210mmx145mmx102mm

Product process:

1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage.

2. Polyethylene PE imported from South Korea as raw material, tasteless.

Product Features:

It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.

FLY CO2 Online Fiber Laser Marking Machine

CATEGORY
Miscellaneous
MANUFACTURER
Gutenberg
MODEL
FC-20F/30F/50F
SIZE
800x1060 mm.
YEAR
2021



DESCRIPTION:
More professional industrial CO2 Fly high stability laser machine.

CO2 lasers typically used for beverage bottles including PET, PVC, and also for marking packaging card and clear glass.

Fly CO2 capable of marking products on faster production lines or with more complex coding or substrate requirements such as metals like steel and aluminum, and medication blister pack printing.

Advantages
- Laser Technology Refined
Application of the system can fully or partially replace the traditional inkjet coding, especially for the new material which inkjet cannot coding and remain permanent traceable code.

- LCD Touch Screen
Software installed on the LCD touch screen. The marking speed, power, frequency... all can be adjusted on the screen. It s very convenient.

- Scanner Head
Adopt advanced digital high speed scanning, galvanometer, small volume , quick speed, good stability, performance reached the international advnaced level.

- High Quality Alloy Case
The laser source, controller card and other electric circuits all setup in the case. Also there are exhaust fan in the case.

- Lifting Handle Design
Shake Hand Wheel
Laser Focus Distance can be adjusted easily. Operation is simple and convenient

Simple tube-sheet Dual-purpose Fiber Laser Cutting Machine
Patent for laser cutting tube center bracket
Combine a plane laser cutting machine with a special laser cutting machine for pipes into one,
It not only has the function of plane cutting but also can meet the needs of professional pipe cutting.
Functions of Fiber Laser Sheet and Pipe Cutting machine
Able to realize high-speed, high-precision flat sheet processing
Able to cut various circles in different directions and sizes on round tubes
Intersecting holes can be machined at each position of the tube
Can realize rapid cutting and blanking of pipes
The range of processing pipes is large, and some opening and cutting functions of the formed

Technical Parameters
Laser Power
1000W-6000W
Laser Brand
IPG or Raytools
Laser Wavelength
1070nm
Z Axis Move Distance
280mm
Positioning accuracy
Repeat positioning accuracy
Power Supply
380V/50HZ
Cooling Mode
Water Cooling
Operating temperature of machine
Operating humidity of machine
Machine Weight
4000-9000KG
(according to different machine size)
Machine Size
8500*3500*1000mm
Other machine sizes
3000x1500mm
4000x1500mm
6000x1500mm
8000x1500mm
3000x2000mm
4000x2000mm
6000x2000mm
8000x2000mm

Tube-sheet Dual-purpose Fiber Laser Cutting Machine
Patent for laser cutting tube center bracket
The professional tube-sheet dual-purpose laser cutting machine is a combination
of the advantages of the flat sheet laser cutting machine and the professional
tube laser cutting machine.
Realize high-speed, high-precision flat and tube blanking and processing.
Functions of Professional Fiber Laser Sheet and Tube Cutting Machine
It can cut multiple cylindrical intersecting holes of different directions and different diameters on
the main pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection
between the axis of the branch pipe and the main pipe.
It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the
conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection
between the branch pipe axis and the main pipe axis.
Ability to cut the beveled end face at the end of the round tube.
It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe.
It can cut square pipes and cut 360 degrees.
It can cut square holes and waist-shaped holes on round tubes.
It can cut various steel pipes.
Various circular cuttings can be performed on special-shaped tubes such as square tubes, oval
tubes, U-shaped tubes, and rectangular tubes.
It can realize quick clamping and automatic centering.
It can realize high-speed and high-precision cutting functions such as flat panels, and the flat
format can be selected.

Technical Parameters
Laser Power
1000W-15000W
Laser Brand
IPG or Raytools
Laser Wavelength
1070nm
Z Axis Move Distance
280mm
Positioning accuracy
Repeat positioning accuracy
Power Supply
380V/50HZ
Cooling Mode
Water Cooling
Operating temperature of machine
Operating humidity of machine
Machine Weight
60000-13000KG
(according to different machine size)
Machine Size
15000*4600*2600mm
Other machine size options
3000x1500mm
4000x1500mm
6000x1500mm
8000x1500mm
3000x2000mm
4000x2000mm
6000x2000mm
8000x2000mm

7 Axis Fiber Laser Cutting Machine for Tubes
Special laser cutting machine for pipes, consisting of 7 axis and 3 chucks.
it is controlled by a bus numerical control system and is equipped with a bus servo motor, realize faster,more stable , zero taillings, which can greatly increase production capacity and save raw materials.

Functions of 7 Axis Fiber Laser Cutting Machine for Tubes
Able to cut multiple intersecting holes of circular pipes with different directions and different
diameters on the main pipe to meet the condition of eccentric and non-eccentric perpendicular
intersection between the branch pipe axis and the main pipe.
It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the
conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection
between the branch pipe axis and the main pipe
Ability to cut the beveled end face at the end of the round tube
It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe
Able to cut square pipes and cut 360 degrees
Can cut square holes and waist-shaped holes on round pipes
Able to cut various steel pipes
Able to perform various graphic cutting on heterogeneous tubes such as square tube, oval tube,
U-shaped tube, rectangular tube surface, etc.
Can realize quick clamping and automatic centering

Technical Parameters
Laser Power
1000W-6000W
Laser Brand
IPG or Raytools
Laser Wavelength
1070nm
Z Axis Move Distance
150mm
Positioning accuracy
Repeat positioning accuracy
Power Supply
380V/50HZ
Cooling Mode
Water Cooling
Operating temperature of machine
Operating humidity of machine
Machine Weight
6500KG
Machine Size
14000*2440*2130mm

5 Axis Fiber Laser Cutting Machine for Tubes
Special laser cutting machine for pipes, consisting of 5 axis,
It can realize rapid cutting of various special-shaped tubes such as round tubes, square tubes, oval
tubes, U-shaped tubes, etc.
The whole machine has high performance, high efficiency, and can realize 6-meter-long pipe
processing and shaping at one time.
It is widely favored by industries such as fitness equipment, furniture, props, automobiles, shelves, and
petroleum pipelin

Functions of 5 Axis Fiber Laser Cutting Machine for Tubes
Able to cut multiple intersecting holes of circular pipes with different directions and different
diameters on the main pipe to meet the condition of eccentric and non-eccentric perpendicular
intersection between the branch pipe axis and the main pipe.
It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the
conditions of eccentric and non-eccentric perpendicular intersection and oblique intersection
between the branch pipe axis and the main pipe
Ability to cut the beveled end face at the end of the round tube
It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe
Able to cut square pipes and cut 360 degrees
Can cut square holes and waist-shaped holes on round pipes
Able to cut various steel pipes
Able to perform various graphic cutting on heterogeneous tubes such as square tube, oval tube,
U-shaped tube, rectangular tube surface, etc.
Can realize quick clamping and automatic centering

Technical Parameters
Laser Power
1000W-6000W
Laser Brand
IPG or Raytools
Laser Wavelength
1070nm
Z Axis Move Distance
120mm
Positioning accuracy
Repeat positioning accuracy
Power Supply
380V/50HZ
Cooling Mode
Water Cooling
Operating temperature of machine
Operating humidity of machine
Machine Weight
4500KG
Machine Size
8600*2440*2130mm

Fiber Laser Cutting Machine with Enclosure and Shuttle Tables

Machine Patent:ZL2014302043257

XAxis Patent :ZL2016203901860

Exchangeable machine structure (high efficiencyexchange, complete tables exchange in 13 seconds)Fully enclosed structure for metal processing

The overall appearance is generous and the structure design is reasonable

Adopt import configuration to guarantee high stability and reliability high speed, high efficiency

Technical Parameters

Laser Power

1000W-15000W

LaserBrand

IPG or Raytools

LaserWavelength

1070nm

Z Axis Move Distance

280mm

Positioning accuracy

+0.03mm/m

Repeat positioning accuracy

±0.02mm

PowerSupply

380V/50HZ

800-4000KG

Maximum bearing capacity

(according to different las er power)

Codling Mode

Operating temperature of machine

Operating humidity of machine

Water Codling

0-40

5%-90%

Machine Weight

Machine Size

Othermachine size options

7000-22000KG

(according todifferent machine size)

9150*2900*2400mm

3000x1500mm

4000x1500mm

6000Ã??1500mm

8000x1500mm

3000x2000mm

4000x2000mm

6000x2000mm

8000x2000mm