BR-60W CO2 POWER SUPPLIES
Feature
1.Both analog signals of 0 to 5V and PWM signals are used� to control and regulate this AC110V CO2 power supplyâ??s output laser power.
2.This AC110V CO2 power supply� can adopts� ether external LCD digital display module by network cable,which can show� HV carbon dioxid power supplyâ??s working current,working statues and failure code.� It is very good function for both machine factory and machine users
3.This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block� to input� laser control signal and black� steel case.
4.This LCD screen CO2Ã? power supplyÃ? hasÃ? high efficiency andÃ? quickÃ? response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube.Ã?Â
5.This 60W CO2� laser power supply� terminal control is simple and adapted to high and low level signals. TTL 1level can be used to control the start and stop of laser� power. At the same time, an abnormal protection switch was added to detect if� the external water is ventilated or not.
6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japanâ??s bearing and make the fan works for very long time.
6.This HV carbon dioxide� power supply� has good grounding protection5.With advanced open circuit protection, the� 60W CO2 power supply� can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply� caused by the bursting of the laser tube.
Specification
lnput� Input voltage AC220V�±10%� (AC110V specified while order)
AC frequency 47~440HZ
Maximum input power 490W
Maximum input current 2.2A
Output Maximum output voltage 25KV
Maximum output current 28mA
(depending� on the laser tubes of different manufacturers)
Efficiency More than 90%� (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10â??~50â??
Storage of temperature -20â??~75â??
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100,000 feet of work
200,000 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 210mmx145mmx102mm
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Main Features: 1) Good compatibility: It can be applicable to 80W laser tube. 2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7mAAC220V Input :0.4mA(AC110V Input) Output: Maximum Input Voltage: DC 40KV Maximum Output Current: DC 28mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40 Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=280*173*97(mm) COLOUR : YELLOW , BLACK 3.5kg to be boxed.
Supplier: Electronics, mobile phones
Buyer: Routers, laptops, monitor, keyboard, cameras, headphone
Supplier: Food products, fruit and recreational plants, palm trees, generators, transformers, household electronics, ev charging stations, accumulators and battery systems, cooling appliances and frigotic systems for vehicles, furnitures (office and household types), copper tubes, powder metals for 3d printers, electrical equipment, defense products most notably drones (strategic /tactical), carrying boxes.
Services: Trade, sourcing and investment intelligence, supply chain development services, trade facilitation, inspection, operations support, full fledged trade/supply chain agency services
Buyer: High grade lead, zinc, antimony, manganese, iron ores.
Laser cutting (84561000)
1. Main Features: 1) Good compatibility: It can be applicable to 40W and 30W laser tube. 2) Fast response speed and effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7m AAC220V Input 0.4mA(AC110V Input) Output Maximum Input Voltage: DC 25KV Maximum Output Current: DC 20mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40¡æ£¬Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=167*144*97(mm). 2.7kg,32*25*22cm carton box.
Supplier: Solar equipments, laser equipments, instruments and meters and so on
Supplier: Consumer electronics, such as mobile phones, laptops and console games.
Services: Importing exporting
Buyer: Grade a laptops
The model Dw-co2-80w-9060-a Working area 900mm*600mm Laser power 80w Laser type Reci hermetic co2 glass tube Guide rails Taiwan imported linear guide rails Control system Dsp industrial control system Working table Aluminum platform Drive system Japan imported step motors Lens Imported focus lens and mirrors Positioning accuracy 0.01mm Cutting speed 1~1500mm/min Engraving speed 1~3000mm/min Cooling way Water cooling and production system Graphic format supported Bmp, gif, jpeg, dwg, psd, tiff, plt, cdr, dmg, Compatible software Coreldraw, photoshop, autocad Interface Usb Application computer system Windows 2000/windows xp/windows7 Cutting thickness 0-15mm(depends on different material) Optional Equipe with rotary device, industrail chiller cw3000 Worktable Electric up-down worktable max distance 500mm Applicable materials Non-metal materials such as acrylic, double color board, plexiglass, leahter, fabric, paper, hair felt.Carpet, Common glass, bamboo and wood, rubber, pvc, polypropylene, marble, granite and tiles, leather cloth etc. Applicable industries: Advertising industry, billboards, artistic gifts, crystal ornaments, paper-cut, bamboo, home design decorate industry, And wooden product, garment and leather, embroidery, decoration and upholster industry. Packing Plywood case Machine dimension L1450mm*w950mm*h1100mm Packing size 1680mm*1200mm*1250mm Net weight 210kg Gross weight 285kg
