Reci Dy-10/13/20 80/100/150W Laser Power Supply

6040 co2 laser engraving machine 40w 4060 co2 laser engraver Features This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry. Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube Features: 1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube. 2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal. 4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst. 5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified. 6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case. Specification: Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Max. Output Voltage 40KV Max. Output Current 28mA(Depends on Laser tube) Efficiency 91% Over Current Protection 130% of Max. Current Open circuitProtection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) �  Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH) 270x160x80mm

Supplier: Solar equipments, laser equipments, instruments and meters and so on

HDD-880 12.5 Full HD 1080P Display Capacitive Touch Screen POS System Machine with Optional MSR for Contactless Payment. Model Number : HDD-880 Samples: HDD-880 $235.00/Piece | 1 Piece (Min. Order) | Buy Samples Lead Time: Quantity(Pieces) 1 - 10 11 - 100 >100 Est. Time(days) 7 20 To be negotiated Customization: Customized logo(Min. Order: 100 Pieces) Customized packaging(Min. Order: 200 Pieces) Graphic customization(Min. Order: 100 Pieces)

Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station

UHF600~960MHz, Single channel 16 user selectable channel / USB device , Audio Inputs : 3.5Ø Line in Jack/6.3Ø microphone Jack, Charger time Approx. 4.5 hours, Operating time : 2~8 hours (Depending on the volume) Power supply: Built in 12V/2.7Ah Lead-acid battery x1, and 19V/2.63A/100-240V AC adaptor

Product Introduction Optical system: components as soon as possible, performance guarantee Using imported high-quality CO2 laser, beam expander and mirror and focusing lens on the galvanometer scanner, it has high precision, fast speed and stable performance, which can meet the requirements of long-term continuous work. The air-cooling system is stable and worry-free. The cooling system adopts air-cooling. It should be ensured that there are no obstructions around and smooth ventilation. This is the guarantee of the laser's long life, stable and reliable work. Workbench Multi-function, high-precision workbench: Pre-installed high-precision and practical multi-function workbench, the workbench has multiple flexible screw holes, which is convenient for customized installation of special fixture platform. Safe and stable, flexible to move, suitable for both movement and static Four large foot cups ensure stable and safe installation of the equipment, and avoid the influence of the equipment use environment on the marking effect. The four universal wheels make the equipment easy to carry. Application industry: It is widely used in the marking and cutting of graphics and text in clothing accessories, leather, food and beverage, pharmaceutical and daily necessities packaging, electronic components, handicraft processing, glass and stone processing and other fields. It is suitable for marking most non-metallic materials, such as paper packaging, plastic products, label paper, leather fabrics, glass ceramics, resin plastics, bamboo and wood products, PCB boards, etc.

1. Main Features: 1) Good compatibility: It can be applicable to 80W laser tube. 2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7mAAC220V Input :0.4mA(AC110V Input) Output: Maximum Input Voltage: DC 40KV Maximum Output Current: DC 28mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40 Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=280*173*97(mm) COLOUR : YELLOW , BLACK 3.5kg to be boxed.

General type 40W60W80W MYJG CO2 laser power supply myjg-40/60/80watt laser power source 1. Product Features: It has green color control signal terminal board 1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories. 2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation. 3. The laser output power can be adjusted by 0-5V analog signal or PWM signal. 4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst. 2. Aging test: Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified. 3. Specification: Item MYJG-40 MYJG-60 MYJG-80 MYJG-100 MYJG-130 MYJG-150 30KV 35KV 45KV 50KV 50KV 50KV 20mA 23mA 30mA 30mA 35mA 38mA Input AC Voltage AC220V or AC110V Input DC Voltage DC 300V or DC150V Input AC Frequency 47-440Hz Efficiency 91% Over Current Protection 130% of Max. Current Open Circuit Protection Yes (For short time) Cooling Fan Cooling Voltage Range of High Level Control Not Less Than3V Voltage Range of Low Level Control Not More Than0.8V Working Temperature -30 - +65 Degree Centigrade Humidity 20-85%RH(No Dew) Withstand Voltage Input-Output AC1500V/MinNot More Than10mA Input-Shell AC1500V/MinNot More Than10mA Output-Shell Connected Insulation Not Less Than 50MOHM(DC500V) Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V) Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours MTBF Not Less Than30,000hours Full Load 60 Degree Centigrade test 12Hours 7 Seconds Start/Stop Test 500 Times Dimension(LXWXH)171mmx161mmx91mm Note Power supply warranty:12 months. Delivery time:2 working days after payment received. Package:Carton,foam and wooden box. Shipping method:DHL,UPS,Fedex or TNT Payment method: T/T,PAYPAL,Western Union Application:General type power supply and widely used on 40W-150W CO2 laser engraving machine.or cutting machine

Our organization is offering an astonishing range of Laser Cutting Services. Offered array of services is rendered according to quality norms. In addition to this, offered services are much admired due to their hassle free management, on-time execution, and client-focused approach. Materials We Cut: Stainless Steel, Brass, Copper, Aluminum Mild Steel, Carbon Steel, Galvanize Steel We benefit our customers with: Our Laser Cutting-Bending software are qualified to handle any complicated shape with less process time and high accuracy with zero tooling cost with prompt services in low/high (Bulk) Quantities Supply. We look forward to business association with you for long term. We offer economical rate in volume business tie up