PTFE Parts
Glass plant and pipeline should be supported correctly. To prevent inducing undesirable stresses stresses in the glass, support should be rigid. When supported, glass should be in compression. Generally glass plant and equipment are supported in a rectangular tubular structure. This structure is formed of galvanized mild steel tubing with the cast iron fittings, which are described in this catalogue. This type of structure provides enough flexibility for future modifications and is strong enough to support a glass unit. Following rules should be followed while supporting a glass unit in a tubular structure. The structure be rigid. To give lateral support it must be braced back to the nearest wall or any rigid feature. All glass columns are build up from a fixed point on which whole weight of the column should be taken. If total loads exceeds the permissible limits, counter balance supports should be used to relieve excessive weight. With change in temperature, glass column and tubular structure expands at different rate. Therefore glass unit must be free for vertical movement above the fixed point. Hence above the fixed point guide supports should be used to give lateral support. Structure Tubes, Galvanised For forming the structure "B" class galvanised tubes are used in size of ½",1", 1¼", 1½", and 2. Cut tubes are available in required length to form a standard size structure. Cut tubes are provided with rubber plug at both the ends.
Column Components Measurement & Controls Column Components In many operations like reaction, extraction and absorption, the transparency of glass is a particular advantage. For such processes a range of column components are available in borosilicate glass which offers many advantages like : Inert to almost all chemicals hence no risk of contamination. Transparency allows visual monitoring of the process, flow patterns, colour changes etc. Almost universal resistance to corrosion Smooth surface permits easy cleaning and prevents fouling. Measurement & Controls In this part we have introduced equipment for efficient measure and control like Digital temperature indicators and controllers, Electro-magnet and timers for reflux control and Liquid level controller.
Product Description V945 1.5mL Amber Screw Neck Vial w/Write-on Spot, 9-425 Thread, 11.6*32mm, USP type 1 Features 1)9mm screw vials can be used on all common autosampler 2)Standard narrow neck design for GC and HPLC 3)9mm wider opening for easy puncture 4)Clear, type 1 class A borosilicate glass 5)9mm PTFE/silicone septa, has excellent chemical inertness, acid and alkali resistance 6)9mm screw black open top pp caps
Product Description 1.5mL small opening screw-thread vial amber glass vials V935 polypropylene autosampler vial manufactures septa Features 1)9mm screw vials can be used on all common autosampler 2)Standard narrow neck design for GC and HPLC 3)9mm wider opening for easy puncture 4)Clear, type 1 class A borosilicate glass 5)9mm PTFE/silicone septa, has excellent chemical inertness, acid and alkali resistance 6)9mm screw black open top pp caps
Measuring Jugs These handy jugs, molded in polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting & have raised graduations for easy reading. Capacity ml Least Count 250 ml 10 ml 500 ml 10 ml 1000 ml 10 ml 2000 ml 20 ml
1. Application Ultraviolet aging test chamber uses ultraviolet lamp as light source. By simulating the ultraviolet radiation and condensation in natural sunlight, accelerated weatherability test of materials is carried out to obtain the results of weatherability of materials. It can simulate the environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation and darkness in natural climate. By reproducing these conditions, it can merge into a cycle and let it automatically execute the number of cycles. 2. Standards Conforms with ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE J2020, ISO 4892, all current UV aging test standards. GB/T14522-93 National Standard of the People's Republic of China--Accelerated Test Method for Plastics, Coatings and Rubber Materials for Machinery Industry Products-Artificial Climate GB/T16585-1996 National Standard of the People's Republic of China-Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent Ultraviolet Lamp) GB/T16422.3-1997 standard design and manufacture of plastic laboratory light source exposure test method. 3. Product Parameters Standard Configuration Editor For Test Box (1) Install 8 UV ultraviolet lamps on both sides of the studio. (2) Sample holder number: 20 pieces. (3) Sample holder size: 404 x 105 (mm) (4) The heating mode is inner tank water heating, fast heating and uniform temperature distribution. (5) The drainage system uses the return vortex type and U type sedimentation device to drain the water. (6) The distance between the surface of the sample and the ultraviolet lamp is 50 mm and parallel. (7) The actual workroom is made up of test samples and brackets. (8) Internal water level automatic replenishment. (9) The box cover is bidirectional flip type, easy to open and close. (10) The bottom of the test box adopts high quality and fixed PU wheel. 4. Power Supply Condition Editor Power requirements: AC380V ± 10% 50 ± 0.5Hz three-phase five wire system. Preinstalled power: total power +2.0KW Users are required to install air or power switches for the equipment at the installation site.
I. Application Xenon lamp test chamber uses xenon arc lamp which can simulate all sunlight spectrum to reproduce destructive light wave in different environment. It can provide corresponding environment simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used to select new materials, improve existing materials or evaluate the durability of materials after composition changes in the test, is a good simulation of different environmental conditions that materials exposed to sunlight changes. 2. Standards GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTM D2565 Comply with GB/T16585-1996, GB14522-93, GB/T16422.3-97 and ASTM D2565 standards. 3. Main technical parameters 3.1Humidity deviation: + 2.5% R.H (Humidity75%R.H), + 3% R.H (Humidity 75%R.H) (without light) 3.2 Types of Light Sources: imported air-cooled all-solar spectral long arc xenon lamp (average service life of 1600 hours or so) 3.3 Rainfall time: 1~9999 minutes, adjustable. 3.4 Rain cycle: 1~240 minutes, interval (break) adjustable 3.5 Light source wavelength range: 300-800nm 3.6 Humidifying power: about 2KW 3.7 Light source irradiance: 290~800nm: 100~600w/m2 300~890nm: 200~1200w/m2 340nm: 0.3~1.2w/m2 420nm: 20~120w/m2 3.8 Distance between arc center to sample frame: 350 ~ 380mm 3.9 Rotating speed of sample basket: 1r/min 3.10 Water spray cycle: Water spray time: 0 ~ 99h59min, continuous adjustable Stop time: 0 ~ 99h59min, continuous adjustable. 3.11 Lighting time: continuous programmed control. External dimension W x D x H: 1050 x 1050 x 1750 mm Internal dimension W x D x H: 500 x 500 x 600 mm Temperature range 080 Temperature deviation ±2 (without illumination) Humidity range 30 ~ 98% R.H Spectral wavelength 300nm ~ 800nm Xenon lamp power 1.8KW Life span 1600 hours Blackboard temperature 85±3 Power About 4KW; 220V±10%, 50HZ
Stainless Steel Thermal Shock Test Chamber 1. Principles and methods It uses the low temperature and high temperature storage hot trough, according to the movement need, uses the cylinder valve to switch the cold and hot air, thus achieves the fast temperature impact effect, balances the temperature control system (BTC) + the special design supply air circulation system, controls the SSR by the P.I.D. method, causes the heating amount of the system to be equal to the heat loss, therefore makes it long-term stable use. 2. Main Parameters 1. Performance: wind cooling type at room temperature ±25, no load. (1) Impact temperature range: - 40 ~ 150 (2) Temperature setting range of high temperature cell: + 60 ~ + 200 The temperature rise time of the high temperature tank is about 35 minutes from RT (room temperature) to + 200 degrees (room temperature + 10 ~ + 30). (3) The temperature setting range of cryogenic tank is from - 60 to - 10 . The cooling time of the cryogenic tank is from RT (room temperature) to -60 , which takes about 90 min (room temperature + 10 ~ + 30 ). (4) Laboratory temperature: - 40 - 100 (5) Temperature fluctuation: ±1 . (6) Temperature uniformity: ±2 . (7) Shock recovery time: - 40 ~ +100 takes about 3 minutes (no load), (high and low temperature shock isothermal time is more than 30 minutes each).
I. Application 1.1 Dust-proof test box is designed and manufactured according to GB4208-93 (equivalent to IEC60529-2001) "Shell Protection Grade (IP Code)" and is suitable for sand and dust test of electrical products with the first characteristic digits of 5 and 6 (IPX5 and IPX6). 1.2 The test chamber can provide non-laminar vertical circulating airflow of dust, which can be controlled regularly. It is equipped with a vacuum pump to pump air into the outer shell of the tested product, and it can adjust the pumping volume and pressure difference.In addition,the air temperature control device is installed in the chamber to ensure that the test is carried out under the standard environmental conditions. 1.3 According to the standard requirements, this test chamber adopts the artificial analogy dust environment to test the dust-proof ability of the tested products, and its specific requirements and eligibility criteria should be in accordance with GB4208-93 (IEC60529-2001) or product-related standards. 2. Structure and Material Material: both inside and outside gallbladder adopt SUS high grade stainless steel plate door: tempered glass door. Sample outlet: dust-proof socket Controller: programmable controller (the controller has the following arbitrary setting control functions). A. Dust blowing time (stop and blow) h/m/s adjustable B. Cycle: arbitrary adjustable C. Preset test time: 0s to 999h99m99s arbitrary adjustable D. Power on: break through break Metal screen size: nominal diameter 50 um, nominal distance between lines 75 um Blower: all plastic centrifugal fan Vacuum system: equipped with pressure gauge, air filter, pressure regulating triple parts, connecting pipe (vacuum pump with another, when ordering instructions) Remarks: The test box can meet the requirements of protection grade test for household appliances, low-voltage appliances, automobile and motorcycle parts in GB2423, GB4706, GB4208, DIN. The device can not meet the sand and dust test in GJB150.
1. Application Salt spray corrosion test box is designed for surface treatment of various materials, including metal plating, hardware, electronic components, chemical coatings, baking paint, automobiles, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic skin film, anodic treatment, rust-proof oil and other industries, testing the quality of its products and its corrosion resistance. 2. Standards Conforms to ASTM G85-02 and GB/T2423.17 test standards. 3. Performance parameters Laboratory volume: 108 L, studio size: 600 * 450 * 400 mm Laboratory temperature: 35 ~ 0 The temperature of the saturated air cylinder is 47 to 63. Maximum capacity of test fluid: 15 L External dimension: 1075 * 630 * 1185 mm Can be customized according to customer requirements.
1. Application Ozone is rare in the atmosphere but a main factor for rubber crack. This product simulates and strengthens the ozone condition in the atmosphere, studies of the law of ozone reacting on rubber, and quickly identifies and evaluates the anti-ozone aging performance and the anti-ozone agent protection efficiency of rubber. Reference standard: GB/T7762-2003 vulcanized rubber or thermoplastic rubber ozone cracking resistance static tensile test, GB/T 2951.21-2008 cable insulation and sheath material general test method, GB/T 11206-2009 rubber aging surface cracking test method, and other relevant standard test methods. 2. Machine Platform Structure (1) Refrigeration System A, Adopt the completely closed original French Taikang compression head B, Scale type fan cooling condenser. C, Scale type multi stage automatic load capacity adjustment evaporator D, Environment-friendly frozen snow species E, Other accessories: desiccant, oil separator, high voltage protection switch F, Expansion system: all imported units from Europe and America are used. (2) Electronic system: (safety protection system) A, Zero crossing gate fluid power controller SSR 2 set; B, Compressor overheat protection switch. C, Compressor overcurrent protection switch; (3) Air duct system: adopt multi Wing Stainless Steel Zhu long to speed up hot and wet winding. (4) Heating system: scale type stainless steel electric heating tube. (5) Control system A, TEMI880 LED display, touch-type setting data, input in Chinese and English, programmable temperature regulation, humidity controller, touch-type setting data input can be programmed and manual control B, Degree of resolution: 0.01 C, Temperature range: 10 ~ 70 D, Each segment can be directly set temperature and time. (6) Inside and outside box insulation layer. A, Inner box material: SUS#304 1.0 mm thick stainless steel plate. B, Outer box material: SUS#304 1.2 mm thick stainless steel sand paint C, Thermal insulation material: PU rigid foam glass wool
Description: The test apparatus suitable for measuring the smoke emitted by wires and cables burning under specific conditions, such as horizontal combustion of some cables or optical cables, are used as a means of comparing different cables or optical cables or judging whether they meet specific requirements under flaming or flameless combustion conditions. . It meets the test standard of GB/T17651.1-2-19.98 "Determination of smoke density in combustion of cables and optical cables under specific conditions". Performance parameters: Optical measuring device: The light source and receiver should be placed in the middle position outside the sealing window on the opposite wall of the combustion chamber. Measurement range: 0-100%. That is, the optical device will be energized before the blank test. Calibration of transmittance: calibration with transmittance of 25%, 50% and 75%. Standard Fire Source: Standard Fire Source: 1.0L+0.01L Alcohol Plate; Ethanol: 90% +/- 1%; Methanol: 4% +/- 1%; water: 6% +/- 1%. Control system: adopt DETECION control procedure and ZWH 4500 acquisition control card. Operating interface: WINDOWSXP operating interface, DETECION control program, perfect security mechanism. During the test, the measurement results are displayed in real time and the perfect curve is plotted dynamically.
Constant Temperature Humidity Test Chamber 1. Criteria Performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 Basic parameters verification methods for environmental test equipment for electrical and electronic products low temperature, high temperature, constant humidity and alternating humidity and heat test equipment. Basic environmental test code for electrical and electronic products test A: low temperature test method GB 2423.1-89 (IEC68-2-1) Basic environmental test code for electrical and electronic products test B: high temperature test method GB 2423.2-89 (IEC68-2-2) Basic Environmental Test Rules for Electrical and Electronic Products Test Ca: Constant Humidity and Heat Test Method GB/T 2423.3-93 (IEC 68-2-3) Basic Environmental Test Rules for Electrical and Electronic Products Test Da: Alternating Humidity-Heat Test Method GB/T423.4-93 (IEC68-2-30) Control Methods and Characteristics Balanced temperature control system (BTHC) controls SSR by P.I.D. so that the heating and humidification of the system is equal to the loss of humidity and heat, so it can be used stably for a long time. 2. Refrigeration system 2.1 Compressor: fully packed compressor imported from France 2.2 Refrigerant: environmental friendly refrigerant R404A 2.3 Condenser: fin type heat sink motor 2.4 Evaporator: fin type multi-stage automatic load capacity adjustment 2.5 Other accessories: desiccant, refrigerant flow window, repair valve 2.6 Expansion system: capacity controlled refrigeration system 3. Main technical parameters Temperature range -40150 Temperature fluctuation ±0.5 Temperature deviation ±2 Heating time about 4 degrees /min (no load non-linearity) Cooling time about 1 degrees /min (no load non-linearity) Humidity range 20% ~ 98% R.H Humidity fluctuation 3% R.H Humidity deviation 3% 4. Structure and Material A. Inner box material: stainless steel plate (SUS #304 1.0 mm thick) B. Outer box material: stainless steel plate is atomized or baking varnish (SUS #304 1.0 mm thick). C. Insulation material: hard Polyurethane foam and glass wool. D. Air supply circulation system: (1) 90 W motor (2) stainless steel lengthened axle center (3) Multi leaf fan (SIRCCO FAN) E. Box door: single door, single window, left open, handle on the right hand side. (1) Window 270 x 360 x 40 mm 3-layer vacuum layer. (2) Planar embedded handle (3) Rear button: SUS #304
Liquid Thermal shock test chamber Three Zone Thermal Shock Test Chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber,Cold and hot impact machine can be used to test material structure or composite material, in an instant by extremely high temperature and extremely low temperature continuous environment can endure degree, in order to in the shortest time test commits any heat bilges cold shrink caused by the chemical changes or physical damage. Applicable objects including metal, plastic, rubber, electronics, pv, solar... And other materials, the products can be used as a basis of improving or reference. Significant reductions in fluid usage make liquid thermal shock affordable Purchasing a liquid thermal shock chamber needs close consideration of the long term operating costs. The specialized liquids used can easily evaporate, causing the loss of thousands of dollars of fluid per year, if not properly contained. Liquid-to-liquid thermal shock testing is typically conducted to apply very strong, repetitive thermal stress to test pieces. It can model a product's ability to withstand thermally-induced size changes, crack resistance, hermetic integrity, and changes in electrical properties. This form of testing provides a very rapid temperature shock recovery of conditions, and it can significantly reduce testing time by requiring shorter soaks and less cycles. The liquid thermal shock chambers have been built to meet the demanding test requirements, which has become a defacto industrial standard for semiconductor devices.
Tunnel oven/conveyor oven Precision Vacuum Oven Electrically heated tunnel oven GRANDE electric heated tunnel ovens are based on a mature and time-tested system with a 10 year proven record of reliable round the clock production.The design is flexible and energy efficient and is built for decades of continuous use.The ovens are suitable for variety of products,ranging from buns to bread,cakes,moon-cakes and pastries.The tunnel ovens are manufactured in two basic versions,depending on the desired temperature range:Normal temperature up to 250??(482�F�) or high temperature up to 500??(935�F�). Features & Benefits Energy saving technology GRANDE tunnel ovens are built with super insulating material that ensures that very limited heat escapes from the ovens resulting in the exterior being relatively cool.The exterior is made of stainless steel and our ovens are known throughout the world of their advance technology and energy efficiency. Heating The tunnel ovens are heated by the tube elements with double heating spirals.They are specially made for each oven to maximize the heat control and reliability of the elements.On average,we use 12 elements per meter of oven.The elements,placed on the top of the oven chamber and below the belt,are easily accessed from the side. Turbo Zone From some products,especially when baking with tins,the use of air circulation from turbo fans in combination with radiant heat is suitable.In such cases the oven is equipped with turbo zones.In a mesh belt oven,the hot air is forced through the belt and in a solid steel belt oven the hot air is blown horizontally along the zone.Turbo zones allow for the baking time to be reduced and lower temperatures used.With the adjustable fan speed the optimal turbo effect can be reached. Steam system In ovens equipped with a steam system the first part of the oven contains steam spread boxes made out of the highest grade of stainless steel.Valves with indicators are used to adjust the proper flow of steam. Oven Control System The PLC touchscreen is designed to be easy to use and give the best possible overview and control.Apart from temperature regulation and oven control,the touchscreen also comes standard with recipe handling,alarms,log function and Internet connectivity. Belt Driving System A frequency converter controls the speed of the driver motor,and the robust belt driving system provides optimal reliability and exact baking time.Long ovens and ovens for heavy products are fitted with double drive system,each with its own motor. Belt conveyor ovens The lowest cost and most common type of conveyor oven,belt conveyor ovens are extremely versatile and best suited for relatively light loads.In addition to standard wire mesh belts,Teflon coated fiberglass reinforced belts are also available for temperatures up to 500??(935�F�).These belts are non-marring and therefore well suited for handling coatings or finished products.
Temperature only test chamber/High and low temperature test chamber Temperature Only Test Chambers High And Low Temperature Test Chamber Temperature chamber models designed to save lab space The Temperature chamber series provides an economical and space-saving solution for a variety of temperature testing requirements. Lowest temperature: -20 or -70�C (-4 or -100�F) Highest temperature: 180�C (354�F) The extended temperature ranges of the Standard series make testing at extreme conditions possible without buying a larger, stand-alone chamber. Two chamber sizes are available, as well. The programmer includes a temperature alarm as just one part of Grande's three-tiered over-temperature protection system. A thermal fuse and a user-set independent limit are also included. In addition, a specimen power terminal allows the user to safely operate powered equipment inside or with the chamber. Features High performance and quiet operation (65 dBa) Space-saving footprint, designed for flush installation to wall Stainless steel exterior Full thermal break around doorframe One 50mm (2") or 100mm (4") diameter cable port on left, with flexible silicone plug Three levels of overheat protection, plus overcool protection Easy lift-off service panels, electrical access on left Detachable eight-foot power cord with plug ETL listed electrical panel conforming to UL 508A Touch-screen programmer/controller with Ethernet Save 120 profiles with up to 1200 steps each (ramp, soak, jump, auto-start, end) One event relay for external device control, plus specimen power interlock relay for safety Grande exclusive options include: Web Controller for full remote access; Chamber Connect software for basic data logging and monitoring. USB and RS-232 ports available, as well.
Dust resistance test chamber IP Dust Test Chamber Dust Resistance Test Chamber Wholesaler Applications Dust resistance test chamber is designed for sealing performance test and reliability test, widely used in electrical, electronics, automobile, motorcycle, LED and other products. It is suitable for the work ability test on the shell sealing performance, product in dust free settlement, in the environment without apparent air flow or with a strong blast air and a large amount of sand dust, and similar conditions. Specifications: Dust proof test machine 1. We are manufacturer, offer reasonable price for you. 2. Customization of non-standard models are available. 3. Major parts adopt imported brands. �Features: Temperature Range: environmental temperature + 5~50?? (Adjustable) Humidity Range: 45%~75% (Adjustable) Metal net standard nominal line diameter: 50mAirflow velocity in the chamber: 1.5m/s (adjustable range 0~4.99m/s) Environmental air pressure: 85Kpa~106Kpa Test dust: dry talcum powder, portland cement, smoke ash and etc. Line spacing between the standard: 32m, 75m and 250m (There are three Metal nets) Selecting dust concentration control instrument: get sample through the optical principle, show the dust concentration and automatic control powder quantity that entering into the Cabinet according to the concentration of the set: (needed cleaning compressed air source configuration, require the pressure: 1~3 kg/cm3) Power supply: 380V 3phases 50 Hz/60Hz Besides dust proof test machine, our business range also covers: � Thermal shock chamber, Temperature humidity chamber, Ramp rate temperature chamber, Walk-in climatic chamber, Solar radiation test chamber, Ozone test chamber, Salt spray chamber, Industrial hot air oven, Dustfree hot oven, Temperature humidity control cabinet, Rain spray test chamber, Automatic glue dispensing machine, Climate and vibration combined chamber, Burn-in aging test room, Steam aging test chamber, Ventilation aging chamber, Vibration tester, Drop tester, Tensile tester, etc. Grande Electronics is one of the largest ce certified dust test chamber manufacturers and suppliers in China and also known as one of the famous chamber brands. Our discount product is mainly featured by good performance and flexibility and low price. Welcome to order the customized and cheap chamber made in China with our factory.
Programmable Temperature and Humidity Test Chambers 3-Layers Temp Humi Test Chamber Temperature Humidity Test Chamber Temperature and Humidity Test Chambers provides an economical and space-saving solution for a variety of testing requirements. It can simulate different climatic conditions, such as heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, which defines the performance of material. By testing the product under different climatic conditions to see whether its performance can meet the intended requirements. It is widely applied in the industries of electron, electrical equipment, vehicle, metal, food, chemistry, building materials, luggage, adhesion tape, printing, packaging, and other product components and materials. The programmer includes a temperature alarm as just one part of Grande's Three-tiered over-temperature protection system. A thermal fuse and a user-set independent limit are also included. In addition, a specimen power terminal allows the user to safely operate powered equipment inside or with the chamber. Corresponding Standard of the Temperature and Humidity Test Chamber: 1.GB11158 high-temperature testing condition 2.GB10589-89 low-temperature testing condition 3.GB10592-89 high-low-temperature testing condition 4.GB/T10586-89 humidity testing condition 5.GB/T2423.1-2001 low-temperature testing condition 6.GB/T2423.2-2001 high-temperature testing condition 7.GB/T2423.3-93 humidity testing condition 8.GB/T2423.4-93 alternating temperature testing machine 9.GB/T2423.22-2001 temperature testing method 10.IEC60068-2-1.1990 low-temperature testing method 11.IEC60068-2-2.1974 high-temperature testing method 12.GJB150.3 high-temperature test 13.GJB150.4 low-temperture test 14.GJB150.9 humidity test Grande Expertise in Humidity Control Controlling humidity in a small environmental chamber can be especially challenging. Grande expertise in humidity control brings intelligent design that is carefully integrated into the Criterion chambers. The humidity subsystems are designed for reliability, convenience, and performance: An external steam generator allows expanded range and is easy to maintain. A separate de-humidification coil improves low humidity control and range. Wet-bulb humidity sensor is a �??primary measurement method�?? for accuracy. It is also economical, easy to maintain, and reliable because it has no risk of failure due to over-saturation. (Read why analog is preferred over digital.) Direct water supply connection is standard, with options for water filtering and recirculating water tank. Features High performance and quiet operation (65 dBa) Space-saving footprint, designed for flush installation to wall Stainless steel exterior
3-layers temp humi test chamber Programmable Temperature And Humidity Test Chamber Temperature Humidity Test Chamber It is applied to test the materials in heat-resistance, cold-resistance, dry-resistance, moisture-resistance. It is simple to operate and program easy to edit. It can show the set values and operative time. Applied to test the prodcuts quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care and so on. The three-in-one design makes the equipment easy to operate and space-saving.Users can do different testings of high temperature,low temperature and costant temperature humidity condition in every single testing area. Every system is entirely independant of each other,adopts 3 sets of refrigeration systems,3 sets of humidifying systems and 3 sets of controlling systems,so as to ensure stable and accurate controlling,and povide a longer service life. Touch control & setting mode is totally controlled and locked up by automatic micro computer system with PID value automatic calculating ability. Corresponding Standard of the Temperature and Humidity Test Chamber: 1.GB11158 high-temperature testing condition 2.GB10589-89 low-temperature testing condition 3.GB10592-89 high-low-temperature testing condition 4.GB/T10586-89 humidity testing condition 5.GB/T2423.1-2001 low-temperature testing condition 6.GB/T2423.2-2001 high-temperature testing condition
