1. Application
Salt spray corrosion test box is designed for surface treatment of various materials, including metal plating, hardware, electronic components, chemical coatings, baking paint, automobiles, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic skin film, anodic treatment, rust-proof oil and other industries, testing the quality of its products and its corrosion resistance.
2. Standards
Conforms to ASTM G85-02 and GB/T2423.17 test standards.
3. Performance parameters
Laboratory volume: 108 L, studio size: 600 * 450 * 400 mm
Laboratory temperature: 35 ~ 0
The temperature of the saturated air cylinder is 47 to 63.
Maximum capacity of test fluid: 15 L
External dimension: 1075 * 630 * 1185 mm
Can be customized according to customer requirements.
Supplier: Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions.
Services: Shipping and transsportation
Buyer: Pvb layers, float glass, aluminium billets, aluminium rolls, galvanized rolls, machinery production lines of relevant products.
Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function. Applicationï¼? Architecture:� curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:� 3300*8000mm Normal size:� 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996
JHG fire-resistant glass is combined with borosilicate glass and float glass technology, which fire resistant properties much superior to those of sode lime glass , the main character is : * high performance to bear high temperature , our tempered borosilicate glass 4.0 can withstand 120 minutes fire test . * Ultra light ,borostilicate glass 8% less than sode lime glass * Hign soften point in fire * High ligh transmission * No SO2 pollution ,no self-explosion Borosilicate 4.0 Technical data : Size: 1830*3000mm Density (g/cm�?�³) : 2.28�?�±0.1 Co-efficient of expansion (�?�±)(20-300�¢??) : 4.0�?�±0.1�??10-6k-1 Softening point(�¢??) : 845�?�±10 Light transmission :�?� �¢?�¥90(6mm) Main usage : 4.0 building partition ,facade ,door ,ceiling ,floor 3.3 household application ,optics , lighting
Supplier: Food (only pre packaged food), clothing wholesale, shoes and hats wholesale, knitted textiles and raw materials, hardware products; chemical products, office supplies, communication equipment, instruments and meters, glass products, agricultural and sideline products
Services: Import and export
Buyer: Yellow corn, sorghum
Supplier: Antigens, antibodies, uncut sheets, and finished ivd test kits
SATINATED GLASS The acid etching or satina process is the removal of silisyum particles from the surface of glass using acid. In this way microscopic cavities occur on the glass surface and due to the refraction occurring in different directions our eyes perceive the glass to be white. It's greatest advantage against sanded glass is that it does not allow fingerprints and that it's cleaning is much easier. It has a much finer surface compared to sanded glass. â?? Our satina products are usually used in the interior decoration and furniture sectors. We can process clear float, extra clear, tinted ,reflective glasses and mirrors as a satina glass. Our satina products can be tempered, curved , and laminated. FEASIBILITY Max. Size: 2500 x 3210 mm, Max. Thickness: 19 mm Min. Size: 1605 x 2250 mm, Min. Thickness: 3 mm
Supplier: Cow hides & buffalo hides, salty, dry, wet blue, crust, finished skins, mung beans, salted bovine hides, dried, wet blue, crust and finished leather,
salted exotic cocodrile skins,mung bean, wood, ground glass, bbq charcoal, canned food, cocoa., balanced animal feed, flour, frozen fish , renewable energy solution
Services: Export customs certification and full procedures associated with worldwide shipping.
Easy-to-Read Color Chart Each strip measures concentrations between 10-200ppm (parts per million), with color matches at 10, 50, 100 and 200ppm. The distinct color chart and accurate, reproducible readings give an immediate response for quick and easy use. Meets Requirements Federal, state, and local health regulations require users of chlorine-based sanitizer solutions to have appropriate test kits available to verify the strength of sanitizer solutions. This kit meets those requirements. Easy to Use The distinct color match at each full unit makes it easy for the user to detect exhaustion of solutions that should be replaced. It also helps avoid the use of excessive amounts of sanitizing agents, to avoid wasting product! Simply remove a strip from the vial, dip the strip into the sanitizing solution, blot with paper towel, then instantly compare the resulting color with the color chart. Accurate Sanitizer solutions are essential in the food service industry. These strips ensure that those sanitizers are at the proper concentration. For accurate results, store these test strips away from areas with high humidity or where they may be exposed to water before use, as those conditions may compromise results. dditional information Weight 0.03 lbs Quantity 1/Each Type Chlorine Test Strips Package Size 100 Pieces Test Level 10 â?? 200 PPM
Salt corrosion spray test chamber Configured for your specific tests Alternate Salt Corrosion Spray Test Chamber Grande makes rain and spray testing easier by offering a standard chamber capable of published and OEM proprietary test methods. The standardized design can be configured for the rain/spray tests you need, eliminating the guesswork in buying a chamber. The system is based on the specification requirements, and can also accomplish individual automakers tests, as well as electrical-enclosure tests. Our Design Grande's modular design allows you to add on additional features, depending on the number and type of tests required. One possible choice is to integrate the spray system with a regular temperature and humidity chamber to save money and floor space, while also creating an opportunity to simulate actual operating conditions your product may experience. Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range. The water is fed to a motorized manifold that rotates the spray arms. Each spray arm has an adjustable valve to allow finer control of the spray. Testing capabilities The specification is modeled after and doesnt differ greatly. Details about the nozzle types and the rotating nature of the spray arms and product table are also included in the requirements. Additionally, drip and car wash tests are also specified. Heavy splash/shower S1 Spray room temperature water with 40 nozzles at 14.2 psi (1 kgf/cm2) for 30 minutes. The flow rate of the water shall be 6.5 gallons/min. (24.5 L/m). S2 Spray room temperature water with 40 nozzles at 42.7 psi (3 kgf/cm2) for 60 minutes. The flow rate of the water shall be 10.3 gallons/min. (39.2 L/m). Light spray/rain R1 Spray room temperature water with two nozzles at 4.3 psi (0.3 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.8 gallons/min. (3.2 L/m). R2 Spray room temperature water with two nozzles at 1.4 psi (0.1 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.5 gallons/min. (1.9 L/m). Examples of OEM automotive manufacturers' requirements Heat the sample to a temperature above boiling, then spray with cold water for about two minutes. Repeat cycle. Heat the sample to boiling temperature, then spray with room temperature water for about fifteen minutes. Repeat cycle. Simulate a car wash by using high pressure spray. Features Rotating rain and spray nozzles designed to JIS specifications Speed control for the rotating spray nozzles Stationary product shelf - A rotating shelf is optional: see options Water pressure regulators, gauges and flow meters Special high-volume floor drain system to rapidly drain water out of the chamber Interior chamber size is the smallest possible area using the JIS specified nozzles Applicable Test Methods
