We've myrrh grade A ( Hagar) available in Kenya on fob or cif basis to china or ASWP.
Our prices are very competitive & quality is guaranteed.
MOQ is 1x20 FCL
High-viscosity heavy fuel oil commonly used in power generation and maritime shipping. This product is available in high-sulfur and low-sulfur options, typically shipped from Russian ports or Middle Eastern terminals.
Key Features:
Sulfur content: 1% â?? 3.5% depending on spec
Viscosity: High (requires heating)
Usage: Boilers, furnaces, heavy marine engines
Shipping Info:
Available in bulk (50,000 MT minimum)
TTT from bonded tanks
SGS inspection and performance guarantee possible
Pricing and Incoterms negotiable depending on buyer preference.
Premium-grade Jet A1 fuel used in commercial and private aviation. This kerosene-type aviation turbine fuel is refined to meet high thermal stability standards and ensures optimal performance for turbine engines. Product is sourced from refineries in Russia, UAE, and Rotterdam with availability for bulk international delivery.
Key Features:
Freeze Point: -47�°C
Flash Point: >38�°C
Conforms to international aviation fuel specs
Available for delivery to bonded airports and tank farms globally
Monthly contracts from 1M â?? 5M barrels
Delivery Options:
CIF to major international airports
TTO (Tank Take Over) at Rotterdam, Houston, Fujairah
Performance Bond & SGS included (where applicable)
Pricing and Incoterms negotiable depending on buyer preference.
(En590 10ppm)
Available in Rotterdam, Houston & Fujairah
(Jet Fuel A1)
Available in Rotterdam, Houston
SPOT & Annual
The MOQ regarding En590 10ppm is 100,000 MT
The MOQ regarding Jet Fuel A1 is 2000,000 bbls
This procedure is NON-NEGOTIABLE
En590 10ppm Price: -20 off the platts price
Jet Fuel A1 price: NWE Platts -2/bbl (gross)
Commission regarding En590 10ppm: 10$/MT will be paid to the buyer side .
Commission regarding Jet Fuel A1 : 2$/bbl will be paid to the buyer side
POF:
MT 190 won't be accepted as a POF by the seller
BCL + ATV will be accepted as a POF
NOTE:
~*IF your buyer accepts the price , procedure and instructions with no negotiation, after his sent documents are approved , a meeting could be held in the UAE/Turkey/Rotterdam/Houston with the title holder , only in order to build trust
~PPOCEDURE
1. The buyer issues an irrevocable purchase order (ICPO) with clear specifications, including quantity, delivery terms (TTV or TTT), the buyer CIS, and banking details.
2. The seller issues a commercial invoice based on the ICPO.
3. The buyer signs and returns the invoice.
4. The buyer provides an Authorization to Verify (ATV) via bank-to-bank communication, confirming their financial capability to meet the payment obligations.
5. Delivery of Proof of Product (PPOP):
The seller provides the buyer with product proof documents, such as the product passport, certificate of origin, SGS report (quality analysis), and tank storage receipt.
The seller grants a Dip Test Authorization (UDTA) to the buyer, allowing access to the sellerâ??s tank for two working days to perform the dip test.
6. Buyerâ??s Verification and Dip Test:
The buyer reviews all provided PPOP documents.
The buyer conducts the dip test (physical test) in the seller's tank through an independent inspector, such as SGS, at their own expense.
7. Payment After Verification:
Once the buyer confirms that the product meets the agreed-upon requirements, they proceed with the payment.
209 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
1. Buyer sends ICPO with CIS, Trade License, Passport Copy
2. Seller provides verbiage for ATV, which will require VTTI/Vopak Contract Reference number, Tank Manager Details, Account name, and Barcode. Buyer provides signed verbiage. Seller will pursue diligence with their tank manager and Buyer Tank Manager.
2. The seller issues the commercial invoice for his product. In the tanks of the delivery port, the buyer will sign and return the commercial invoice, together with the letter of acceptance to the seller.
3. The seller will issue a copy (after the original) of the fresh SGS report of the product, strictly only, to the buyer storage facility company, along with the Confidentiality agreement for Buyer Storage to sign and return to check the fresh SGS report in their storage logistics office.
4. Upon confirmation of the successful verification of the SGS report by the buyer Storage, they shall immediately notify the buyer of the result of the inspection. The buyer will provide the seller with the tank storage voucher (TSR) from his tank company.
5. Upon Seller confirmation of Buyer tank storage voucher (TSR), Seller issues the following POP documents to the buyer, while the Buyer will perform the Dip Test on the product, in Seller storage:-
a. Injection report
b. Product availability statement.
c. Dip Test Authorization (DTA)
d. Recent SGS report update
e. Certificate of Origin
6. After completion of the Dip Test, the seller injects the fuel into the storage tank rented by the buyer, and the seller sends the complete hard copies POP to the buyer.
7. The buyer makes a payment of 100% by bank transfer MT103 TT for the total product.
Platts NWE Minus 4 per MT for Trial
Rotterdam/Houston
1 MN barrels Trial
4 MN barrels * 12 months
once we have agreed in principal to the procedures and pricing, we welcome you to TTM� at Seller's HQ in the UAE
1. Buyer sends ICPO with CIS, Trade License, Passport Copy, TSA/TSR
2. Seller performs diligence and issues Authorization letter for Tank. Buyer returns signed letter
to Seller
3. Seller issues commercial invoice (CI) for the availability quantity in the end seller storage tank,
buyer signs CI and returns the CI to the seller along with Hub, Tank number, and GPS Coordinates.
4. Seller issues(below) POP documents to the buyer.
a. Authorization to physically verify product (ATV) at Seller Tank Farm to be sent by Seller to
Buyer Tank for Endorsement
b. Dip Test Authorization (DTA) Document to be sent to Buyer Tank farm for endorsement of
Buyer Tank Details, GPS, and Hub.
c. Product Passport
5. Seller provides Fresh SGS report, tank storage receipt, and opens communication with SGS
office & storage provider for immediate Dip test of the product.
6. Buyer books the SGS to conduct dip test in end sellerâ??s storage tank and buyer pays SGS from
his own account for all SGS charges for inspection and providing Q&Q reports in full to Buyer
and a copy to Seller. Buyer provides tank details to end seller after performing dip test by SGS
on his account. Seller injection commences to buyerâ??s tank.
7. (NCNDA/IMFPA) will be signed by all parties.
8. Within 24 hours, the buyer makes 100% TT wire transfer payment, end seller changes, title of
ownership to the buyer at the same time of receiving full payment.
9. Seller pays all intermediaries involved in the transaction and subsequently monthly shipment
continues as per terms and conditions of the commercial invoice, and extension of transaction
by issuing twelve (12) months contract to buyer for proceeding.
Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities.
Applications :
Base oil SN 150 works as a base stock for several industrial lubricants.
General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Additives
Hydraulic oils
Transformer oils
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities.
Applications :
Base Oil SN 500 works as a base stock for several industrial lubricants
Engine oils
Transmission fluids
Gear oils
Metal working fluids
Greases
Hydraulic oils
Transformer oils
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
We offer direct supplies of crude oil from Kazakhstan, with full legal documentation and export licenses. The product is available for international delivery under CIF (Cost, Insurance & Freight) terms.
Product: Crude Oil (Light or Medium, depending on availability)
Origin: Kazakhstan
Quality: Conforms to international standards (specifications available upon request)
Volume: From 10,000 MT/month and above
Packaging: Bulk tanker shipments
Incoterms: CIF shipping, marine insurance, and freight to the buyers port included
Payment Terms: SBLC, DLC, LC at sight, or as agreed
Delivery Time: 2535 days depending on destination
Documentation: Full set of shipping and origin documents provided
Inspection: SGS or similar inspection at loading port
Trial shipment: Available upon buyers request
We are open to long-term contracts and strategic partnerships. NDA, LOI, and Proof of Funds are required to begin negotiations.
Price of product ( USD price or FOB price) :
The price shall be determined by the average of the three days around the discharged date (the day before, the day of the discharged date and the day after) referred to Platt's publication, heading: Dated Brent (dtd).
Product origin :
NIGERIA
Key Specifications/Special Features :
0.14% sulphur contents as per standard NNPC
Minimum Order Size and Packaging details :
1-4 million barrels x 12 months within
