High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm
Classification : Copper Coil
Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.
Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.
Classification : Copper Coil
SGS Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.
Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.
Classification : Copper Coil
Copper coil is a highly stable, low maintenance roofing and curtain wall material that is environmentally friendly, safe to use, easy to process and highly resistant to corrosion. Copper coil classification: aluminum bronze coil, brass coil, beryllium bronze coil, tungsten copper coil, copper coil and so on.
Commonly used copper coil brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, etc.
Okaya Europe GmbH is a distributor in Europe for Uratani Engineering Winding Coils.
Our strength lies in our ability to prototype and mass product coils suited to all manner of products.
URATANI ENGINEERING has amassed a track record of delivering around 400 coil prototypes annually.
We also respond to customer feedback, such as can you make this kind of coil and accept various requests for coil production from single pieces to mass production runs.
In addition, the design and production of machinery is also carried out in-house, once we understand what the customer needs, we can also Customize the production process.
532 Copper Coils Suppliers
Short on time? Let Copper Coils sellers contact you.
Copper raw materials (plates, sheets, tubes(pipes), rodes, cathodes, foils, scraps) from japan, china, thailand, and vietnam..1. buys sells business
2. comission base business
3. distribution globally
The copper sheet is a highly malleable and workable metal with outstanding electrical and thermal conductivity and corrosion resistance
Origin: China
Copper bars manufacturer to meet 99.9% JIS, BS, EN,DIN, ASTM and IS standards.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
The above benefitsascertain superior quality tubes for a superior quality end product, more tubefootage per kilogram, reduced tooling problems, reduced chance of costlyleakages, increased productivity and fast manufacturing setup times.
An elbow is a type of plumbing or piping fitting intended to join a piece of pipe and another fitting at an angle. When we have to change the direction of the pipe, copper elbows comes handy which have a close radius to fit in the tightest possible space.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.
Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.
