Battery Testers Chargers Suppliers and Manufacturers

Battery charger for all type of industrial battery 1. Thyristor base 2. Smps base Rane from 5 amp 24vdc to 2000 apm Iec

CTEK battery charger for car, commercial vehicles off road vehicle and motorcycle. Jump starter, Foxwel OBD scanner.

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Battery Tester Checker Universal Battery Tester Monitor (BT01) Quick Sense(BT01): Battery Tester Checker Universal Battery Tester Monitor for AA AAA C D 9V 1.5V Button Cell Batteries Easily check if the batteries are good or bad. It can test different types of batteries, even rechargeable ones. Fit For: AA/AAA/C/D/9V/1.5V Button Cell Battery (Batteries not included) This will keep you from wasting good batteries by throwing out good ones. Small and practical - Simple but effective little battery tester checker(BT-168), compact size and lightweight, easy to carry.

Digital Battery Tester Household Battery Checker Tester for Small Batteries Button Cell BT-168D Digital Battery Tester for AAA AA C D 9V 1.5V, Household Battery Checker Tester for Small Batteries Button Cell (Model: BT-168D) Get accurate readings on AA, AAA, C, D, and 1.5V 9V batteries Easy-to-read, digit indicates power level Check power level of 9V and 1.5V battery Quickly test the capacity of your battery Lightweight and compact design measures 11Ã?? 6Ã?? 2.5 cm Never again get caught with a dead household battery. This handy digital battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one.

Send InquiryCHAT NOW Product Details Product description When the voltage of the battery pack or the voltage of a single battery is less than the set voltage lower limit, or the set discharge duration or set discharge capacity has been reached during discharge, the tester will automatically stop discharging and record the discharge Real-time data of all valuable and continuous processes in the process. Battery charge and discharge tester Technical index Applicable battery Lead-acid battery Model DC220V Discharge current 0-100A recharging current 0-30A Operating mode Used independently or with a constant-current module Control accuracy Discharge current: â?¤�±1%; battery packâ??s terminal voltage: â?¤ �±0.1%; single battery voltage: â?¤�±0.05% Communication with the host PC RS485 interface Data storage capacity 2Gbit FLASH

This battery charger is designed charge 12V battery from 48V DC Power Supply. High efficiency, Battery Charging unit. Wide input voltage range, with over-current and over-voltage protection function. Model No: DLS-4812BC Input Voltage: 48V DC Output Voltage: 13.8V DC Output Current (A): 1, 3, 5, 8, 10, 12 A

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

ModeL24/1548/1548/30110/05110/10220/05220/10 Cell voltage measurement type2V/6V/12V Cell voltage measurement range2V:04V;6V:08V;12V:015V Cell voltage resolution2V/6V:0.001V;12V:0.01V Voltage measurement range of battery string030V060V060V0135V0270V0270V String voltage resolution0.01V0.1V Voltage testing accuracy0.5% Discharge current working range2A150A2A150A2A300A250A2-100A250A2100A Constant current discharge voltage range21V30V42V60V42V60V90140V90140V180270V180270V Discharge PowerMax. 4.5kwMax. 9kwMax. 18kwMax. 7kwMax. 13.5kwMax. 13.5kwMax. 27kw Current testing accuracy1% Battery capacity check range20Ah1500 Ah20Ah1500 Ah20Ah3000 Ah20500Ah201000Ah20500Ah201000Ah Current testing accuracy1% Capacity check testing range extensionOne external load added, the testing capacity range doubled Cell data collection methodwire,wireless(optional) Monitoring current range0300 A Working voltageAC220 Cooling modeRefrigeration by blast Working environment;20%80%RH Storage condition-20;C storage and transport Communication modeRS232 communication Data storage modeSD card Display mode4.7 inch TFT Instrument dimensions(mm)400*243*301430*248*381400*243*301 Weight(Kg)141714 Carry methodPortable type Dimensions : 40*24*30cm Weight : 13kg Packing: as your option

After years of research and development our company has successfully developed a series Battery discharge tester with high intelligence and precision with its proprietary technology. Discharge meter can be in offline mode battery as discharge load Through continuously regulating discharge current constant discharge current at the set value can be realized. When discharging the instrument will automatically stop discharging when the battery terminal voltage or monomer voltage falls to the set lower limit or the set discharge time or the set discharge capacity and record all valuable and continuous real-time process data. Battery discharge meter system the voltage monitoring information of single battery is simple safe and accurate with wireless relay access. Battery discharge meter has a very friendly man-machine interface which can not only complete all kinds of settings and data query under the prompt of menu but also save the process data of discharge in the memory of the equipment transfer to the U disk through the data interface and analyze the data through the special software of the upper computer to generate the required curve and report.

Specifications: Pure sine wave inverter Built-in mppt solar charge controller and battery charger Selectable input voltage range for home use Selectable charging current based on applications Configurable ac/solar input priority via lcd setting Compatible to mains voltage or generator power Auto restart while ac is recovering Overload and short circuit protection Smart battery charger design for optimized battery performance Cold start function Parallel operation with up to 6 units only available for 4000kva and 5000kva model

PSL60S. Floor-type 3-phase 5-line DC ev charger. It is applicable to US, EU, JP, UK and other international electrical standards of 380V - 15%, 60KW commercial type 2 electric vehicle intelligent charging station. technical parameter: Input rating: 380V ± 15%; Rated power: 60KW; Output voltage range: 150-1000VDC; Output current range: 0-250A; Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P; Support communication: APP, RFID Card, Button; External Communication 3G\4G LAN(RJ-45) and WIFI Connector: 2 sets; Cable length: random standard with 5m. Support to purchase 10m, 15m; Operating temperature: -25C~ + 50C; Operating humidity: 5%~98%; Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen; Working life of connector machinery: 10000 times (no-load plugging); Quality assurance: 12 months; Waterproof grade: IP54; Product certification: 3C, CE, ROHS, REACH, cULus. Commodity features: Smart charger product 3-phase; DC 380V± 15%; DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes; Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection; Waterproof grade: IP54; Noise control: 60dB; Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light; OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.; Body materials: metal; Quality assurance: 12 months; Device selection: support OEM customization. Step Price (FOB): 1. Sample unit price,USD27825.00 2. 200set, USD16695.00 3. 400set, USD15025.50 4. 600set, USD13523.00 5. 800set, USD12170.70

BTS is mainly used on performance testing and cycle testing of rechargeable batteries in battery producing factories, scientific research institutes and QC department. BTS (connected with net port) is composed by host computer, middle-subordinate machine and lower-subordinate machine, and BTS (connected with serial port) is composed by host computer and lower-subordinate machine. We are able to make for a range of current from 1mA to 1000A, a range of voltage from 2V to 500V to meet customers' special needs. wooden box.

Starter Battery For " Mercedes Benz " , Part Number : A0009823108

100 ton monthly

Item N135 car battery rated capacity 135AH size 511*189*225MM Nominal voltage: 12V Type: lead-acid Separator: PP separator Brand name: your own-brand name available AMP(at-18â??): 860 Flame retardant container: plastic Own brand: Largestar, TNT, Booster Employee: over 400 Applications: starting battery for cars, buses, trucks and other vehicles Certificates: ISO9001, ISO14001, CE, SASO, SONCAP etc Dimension: custom-made special dimension Advantages: 1. High temperature resistant 2. Greater vibration resistance 3. Low self-discharge 4. More 30% service battery life 5. Warranty Typical applications 1. Starting battery for cars 2. Buses trucks golf cart 3. Tractor 4. Mine vehicle and other vehicles Features: 1. Applications: starting battery for gasoline engine tricycles and cars, motorboats, motorcycles, ATVs, buses, trucks golf cart, tractor, mine vehicle and other vehicles. 2. Delivery: within 30 days after signing contract and receiving 30% deposit 3. Packing: cartons with pallet 4. Deliver from Shanghai, China 5. Certifications: ISO 9001: 2000, ISO 14001, ISO/TS 16949, CE, SONCAP 6. Custom-made special dimension (even provide brand and carton design) 7. Enhanced safety, excellent starting performance at cold temperature, low self-discharge and water consumption

Battery Rmf 2.5lc

Roots Ignite Battery Rmf 5 Lb