48V - 12V Battery Charger

Supplier: Automotive lead acid battery

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Input: 110V/220V, 47-63HZ Specification: DC12V10Amp Constant Charging Voltage: 12V Constant Charging Current:10A Charging Mode : 3 Stages, CC, CV, Trickle Material: Aluminum alloy with Fan Dimension: 135*90*50mm Net Weight :0.7kg Application: Electric Vehicles & Tools Various Car Motorcycle Trucks Ships Lawn Mower RV ATV etc. Protection: Over-current, Over Voltage, Over Temperature, Short Circuit, and Reverse Polarity. Products can be Customized!

Battery charger for all type of industrial battery 1. Thyristor base 2. Smps base Rane from 5 amp 24vdc to 2000 apm Iec

Place of Origin: Guangdong, China (Mainland) Brand Name: VIKLI Model Number: 48v 25ah LiFePO4 Battery Type: Li-Ion Nominal Voltage: 48V Size: Can be customize Nominal Capacity: 25Ah Model: 48v 25ah LiFePO4 Battery Max. charge voltage: 58.4V Discharge cut-off voltage: 40V Standard charge current: 7.5A Standard discharge current: 12.5A Warrenty of lifepo4 battery: 1 year Cycle life of lifepo4 battery: >1500 Times Weight: 10.5Kg Storage temperature: 0°C-25°C less than 1 year Storage humidity: 25-85% RH Packaging & Delivery Packaging Details: Carton / Wooden case Delivery Detail: Shipped in 30 days after payment 48v 25ah LiFePO4 Battery For Industrial Equipment Features 1) Lithium iron Battey with high capacity, light weight, high consistency, high security. 2) LiFePO4 battery pack 48V 25Ah with long cycle life > 1500 times. 3) No memory effect, environmental friendly 4) High gravimetric specific energy, high volumetric specific energy, good deep discharge capacity. 5) LiFePO4 battery pack can be customized. Cells can be combined in series to increase voltage and parallel to increase capacity. Specificaiton Of 48v 25ah LiFePO4 Battery LiFePO4 Battery Cell Model EV GLP 25Ah-94166227 Capacity(0.5C) 25Ah Rated voltage(V) 3.2V Typical Impedance (mO) =2.5 mW Battery material LiFePO4 LiFePO4 Battery Pack Combination method 1P16S Minimal capacity 25Ah Nominal voltage 51.2V Max. charge voltage 58.4V Discharge cut-off voltage 40V Max continuous discharge current (2C)50A Max discharge current (3C)75A Standard charge current (0.3C)7.5A Standard discharge current (0.5C)12.5A Weight (Approx.) ˜10.5Kg Max. dimension(L×W×H)(mm) =Can be customized Operating temperature Charge temperature 0?~45? Discharge temperature -20?~55? Application Our Partners Our Factory Packing & Shipping Packaging: Paper Packaging and Wooden Packaging for DG. Shipping:By Sea; By Air; EMS

CTEK battery charger for car, commercial vehicles off road vehicle and motorcycle. Jump starter, Foxwel OBD scanner.

Supplier: Car battery, automobile battery, motorcycle battery, electrics battery, easy bike battery, tricycle battery, rickshaw battery, solar battery, lifepo4 lithium iron phosphate battery, storage energy battery, ups battery, back up battery
Services: Researching, producing and export
Buyer: Motorcycle, e bike, car, scooter, rickshaw, tricycle, solar products, golf cart, marine, boat, ship, truck,

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.