We are supplying high quality of C.I/D.I Fittings. C.I.D Joints (sizes 80 mm to 1200 mm), Butter Fly Valves, Non Return Valves & Air Valves (sizes 80 mm to 1200 mm), Pipes, Fittings and Flanges.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
Cast Iron Pipes
Ductile Iron Pipe as per list
Malleable Iron Pipe FIttings Types: Elbow 45, Elbow 90, Elbow 180, Street Elbow, Cross, Tee, Cap, Bushing, Union, Nipples, Coupling, Plug, Hex. Bushing, Hex. Nipple, Square Plug and etc. American standard: Materials: ANSI/ASME A197-79 Dimensions: ANSI/ASME B16.3-85 Threads: ANSI/ASME B1.20.1 DIN Standard: Materials:DIN1692 Dimensions:EN 10242 DIN2950 Threads:ISO 7/1 DIN2999 British Standard: Materials: ISO 5922 BS 143 and BS1256 Dimensions: ISO 49, Threads: ISO 7/1
Pipes will be manufactured from grey cast iron in accordance with iso 185-1995 Cast iron is well known for its robustness. All pipes will be protected at the end covered with plastic material as given at the pictures.
Pipes will be manufactured from grey cast iron in accordance with iso 185-1995 Cast iron is well known for its robustness. All pipes will be protected at the end covered with plastic material as given at the pictures.
N/a N/a
1.Malleable iron pipe fitting 2.BV certification and ISO certification 3.BS standard,DIN standard and NPT standard. 1.1/8" to 6" 2.three brands:QIAO,QXM,CWD
Ductile iron pipe from DN80-DN1600. K7, K8, K9 T type, according to ISO2531/EN545. Bulk or 20/40gp.
As per specification ISO 2531/BSEN545/EN598. Can be supplied in loose/bundled conditions in containerized shipment/break bulk mode.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons. The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following: 1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron. 2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil. 3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years. 4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap. 5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability. We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110 2) Material:GGG500-7 or Ductile iron 3) Specific types: "T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000 -all socket tee DN80-2000 -double socket tee with flanged branch DN80-2000 -flanged socket DN80-2000 Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM. "K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12 BOLTED GLAND CONCENTRIC TAPERS, CLASS K12 FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS BOLTED GLAND COLLARS CLASS K12 BOLTED GLAND GHANGE COLLAR CLASS K12 BOLTED GLAND TEE, CLASS K14 BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12 BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH All above "K" type ductile iron pipe fittings specification: DN100-500 Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM Bolts & Nuts in Carbon Steel grade 4.8. Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110 Material : GGG500-7 or Ductile iron.
1), Product Information The ductile iron pipe manufactured by vortex are mainly used for transferring the drinkable water,waste water and for irrigation. The diameter is from DN80-DN2000,K8/K9/K10/K12, Tyton socket and spigot,the standard length is 6m. 2),Standard conform to ISO2531/EN545/EN598/4179/8179 3), Material Ductile Iron GGG500-7&400-12 or ASTM-A-536grade 80-55-06 4) coating Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). Epoxy coating available upon request. 5) joint method available Push-on 6), Process centrifugal casting 7), Inscription Style As per customers' requests Standard Inscription 8), Packing standard export bundle in bulk As per customers' requirements 9), Inspection Foundry in-house Third Party inspection available upon request . More information is available upon receipt of your enquiry.
EN545 Ductile iron pipe fittings With epoxy coating From DN40-DN600 Standard Eur patterns
K9/ C40 BS EN 545:2006 (Water application) BS EN 598:2007 (Sewerage application) Pipe Size Lth/bdl Qty per 40' Weight(Kg) Trailer(Max) K9 DN100 24 288 113 DN150 15 240 172 DN200 12 192 231 DN250 4 & 6 88 301 DN300 4 & 6 80 406 DN350 4 64 500 DN400 4 & 6 40 592 DN450 4 32 695 DN500 4 & 2 24 807 DN600 3 18 1047 DN700 3 16 1379 DN800 1 12 1687 Standard length 6m (Socket, Spigot)
Ductile Iron Pipe & DI Pipe Fittings If you are looking for steel pipe, ductile iron pipe, please contact us and establish business relationship with us. Goodmax have many years of experience and have the components you need for your project, Our products meet the standard like ISO, DIN, BS, JIS,ASTM. API, AWWA. Choose from the following our wide products range - Ductile Iron Pipes, DN100mm--1200mm - DI Fittings by Lost-Foam Technique, DN80--1200mm . 1. The above product standard: ISO2531, BS EN545, ISO4179, ISO8179, ISO4633 2. Productivity: 100,000 ton 3. Joint Type: T type, N type, etc. 4. Pressure: PN10/16 . We have over 10 partner factories or OEM manufacturers, and worked with them for many years, These close network help us to ensure your order will be delivered in very short time with good quality.
NAME:COUPLING FOR DUCTILE IRON PIPE Bolts&nuts:Electroplated galvanized zinc hot dip galvanized Sleevw:ductile iron Gland:Ductile iron Rubber Gasket:SBR,EPDM Or other Coating:Fusion Bonded Epoxy or wet paint
Ductile Iron Pipe Ductile iron pipe refers to the pipe made by high-speed centrifugal casting of centrifugal ductile iron machine after adding spheroidizing agent to the molten iron above No.18. Definition:� Ductile iron pipe factory refers to the pipe made by high-speed centrifugal casting of centrifugal ductile iron machine after adding spheroidizing agent to the molten iron above No.18. Features:� It has the nature of iron, the performance of steel, excellent corrosion resistance, good ductility and easy installation. Use:� Mainly used for municipal, industrial and mining enterprises water supply, sewage, gas transmission, etc. Chemical composition:� The main components are carbon, silicon, manganese, sulfur, phosphorus and magnesium. The ductile iron pipe dimension is from DN80 to DN2600. The wall thickness of the 100mm ductile iron pipe is 6mm. The underground pipe installation method of the ductile iron pipe is simple and fast. If you want to know the tongmao pipeline, please contact me.
