We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following:
1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron.
2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil.
3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years.
4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap.
5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
1. Material: 21CrMo10 2. Specification: DN100-DN1200mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
1. Material: 21CrMo10 2. Specification: DN100-DN1200mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
1. Material: 21CrMo10 2. Specification: DN100-DN900mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
1. Material: 21CrMo10 2. Specification: DN100-DN900mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
We are supplying high quality of C.I/D.I Fittings. C.I.D Joints (sizes 80 mm to 1200 mm), Butter Fly Valves, Non Return Valves & Air Valves (sizes 80 mm to 1200 mm), Pipes, Fittings and Flanges.
1. Material: 21CrMo10 2. Specification: DN100-DN1200mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
1. Material: 21CrMo10 2. Specification: DN100-DN900mm 3. Length: as request 4. Function: the products is used in production of centrifugal cast ductile iron pipe
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
