Advanced sideway 5 supporting points crank, double columns.
(HRD03) injection tooling, injection tooling part Product name: plastic injection mould 1). Supply moulds to international market. We have our own mould dept. and injection molding dept., so we can provide the plastic injection moulds and the plastic parts. 2). Mould material: NAK80, 738,738H, SKD61, P20, 718, 718H,and so on. Plastic Material: ABS, PP, PC, PVC, HDPE,PE, LDPE, PU, PMMA, PA66+GFand so on. Mould base:LKM, HASCO,and so on. All native files and IGES,DXF,STEP,STL, etc. files can be received. 3). The products are related to home appliance, automobile, electronic products, articles of everyday, medical devices, health care products, etc. 4). Have the injection molding dept. which can make us guarantee the mould trial and the batch production of the plastic parts. 5). ISO9001:2000 certified by SGS. Wood case or carton.
Product name: YKI-25 (intensive mixer) Purpose : Exclusively used for mixing soft and hard rubber and plastics, and high molecular composite materials. Properties : 1. The table has complete equipment. It is easy to install, anda can be used to produce immediately except special environments. 2. The mixing room is thoroughly sealed up, and it is safe, simple and convenient to operate. 3. The machine adopts the drop type for materials to come out. It is easy and simple to change colors and rinse. Optional equipment: IPC, HMI, PLC control, inverter drive motor, recorder (amp, temp, or speed), auto weighting system, all the models are ce certified
Thickness: 0.4mm, 0.5mm, 0.6mm Specification: All kinds of cake mould for your selection. FDA, SGS Approval 1. One piece with bubble bag,terrace packing. 2. Color box 3. As per customers' requirement to packing.
Features: Tough plies of truck tire material or conveyor belt virtually eliminates chipping or abrasion, unlike molded rubber, extruded rubber or wood plank bumpers. Attractive deep black color enhances a neat, professional architectural look. Manufactured under pressure exceeding 1, 500 lbs. To absorb over 80% of impact force. Anchor bolts are protected by at least 3" of rubber to prevent damage. Applications Available in two models: bumpers with angles for most applications-- equipped with 1/4" steel angles on both ends; and bumpers with flat plate for use with dock levelers--optional 1/4" flat steel plate for one or both ends. Have unlimited applications in factories, warehouses and docks. Vehicle impact protection for loading docks. Projecting above low docks. Rub rails at the sides of truck wells. Wall bumpers to protect against fork lift trucks. Special construction features to accommodate unusual anchoring conditions. Benefits Provides protection against vehicle damage to docks, buildings and cargo. Absorbs over 80% of truck impact and shock to protect dock and building. Leading bumper sold in the industry today. Standard sizes shipped within 24 hours of order confirmation. Eliminates costly repairs from severe shock to loading docks. Constructed to last and provide years of protection. Maintenance free. 5 year warranty. Material Fabric reinforced rubber pads cut from selected recycled truck tires or conveyor belt. Rubber pads laminated between structural steel angles and secured with 3/4" steel tie rods. Rubber pads 4 1/2" or 6" thick. As per buyers' option
Plastic injection mould.
Xps foam board production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Model: pts135-150-xf Output: 200-400 kg/h or 180...200 m3/24h Model: pts150-200-xf Output: 450-600 kg/h or 300-320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 28-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2). 3 pcs of 40 feet container.
Xps production line Model: pts135-150-xf Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: pts150-200-xf Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: extruded polystyrene (xps) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: polystyrene(ps) Blowing agent: freon(hfc, hcfc, co2) Standard configration 1 mixing system 2 feeding system 3 primary extruder 4 metering pump 5 hydraulic screen changer 6 secondary extruder 7 slot die 8 oil temperature controller 9 board calibrator 10 first haul-off system 11 take-off system 12 cut-to-width system 13 second haul-off system 14 cut-to-length system 15 electrical control equipment * margin recycle system (ptrecyclertm) * optional finishing machines 1 embossing unit 2 planer (rough; fine) 3 groover (straight; dovetail) 4 edge trimmer (sl; rc; tg) 5 slice cutting machine 6 aluminium foil composite machine Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
XPS insulation line Model: PTS135-150-XF Output: 300 - 350 kg/h or 180 - 200 m3/24h Model: PTS150-200-XF Output: 400 - 550 kg/h or 300 - 320 m3/24h Product: Extruded polystyrene (XPS) foam board Board width: 600 mm, 900mm, 1200mm after trimmed. Board thickness: 20mm--100mm Density: 30-40kg/ m3 Material: Polystyrene(PS) Blowing agent: Freon(HFC,HCFC,CO2) Standard configration 1 Mixing system 2 Feeding system 3 Primary extruder 4 Metering pump 5 Hydraulic screen changer 6 Secondary extruder 7 Slot die 8 Oil temperature controller 9 Board calibrator 10 First haul-off system 11 Take-off system 12 Cut-to-width system 13 Second haul-off system 14 Cut-to-length system 15 Electrical control equipment * Margin recycle system (PTRECYCLERTM) * Optional finishing machines 1 Embossing unit 2 Planer (Rough; Fine) 3 Groover (Straight; Dovetail) 4 Edge trimmer (SL; RC; TG) 5 Slice cutting machine 6 Aluminium foil composite machine painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box. 1 set in three 40' containers.
Supply mould and parts with high quality and low price Supply mould and parts with high quality and low price
Supply stamping die and parts with hiqh quality and low price to many places Place of origin: qingdao, china 1) we specialize in stamping die, sheet metal moulds, including the progressive mould. We had export some progressive moulds to japan, italy, iran. 2)the stamping die are related to home appliance, auto parts, electronic products, and so on. 3)iso9001:2000 certified by sgs. Mould material: SKD11, SKD61, CR12MOV, 1CR18NI9TI, V10, AND SO ON. We accept the following file types of inquiry: Pro/e solidworks ug autocad adobe acrobat .Dxf .Pdf .X_t .Stp .Igs .Prt We have confidence in cooperating with you ! Wood case or carton case
Model: CN-psb6000 Mould size: 6060x1240x630mm Block size: 6000x1200x600mm Block density: 10-30kg/l Around 15 mins per cycle at density 15kg/m3 140 m3/8hours Steam consumption: 15-18kg/m3 Supply steam pressure: 6 bars Power: 11kw, actual power consumption :7 kwh 50hz, 380v Overall weight: 9500kg Dimension: 9100x2500x3100mm
We offer all kinds of plastic moulds and parts for electronic industry, precise plastic moulds for digital products, customized parts are welcome. It subjects to the final confirmation of the contract.
We offer all kinds of plastic moulds and parts for electronic industry, precise plastic moulds for digital products, customized parts are welcome. It subject to the final confirmation of the contract.
We offer all kinds of plastic moulds and parts for electronic industry, precise plastic moulds for digital products, customized parts are welcome. It subject to the final confirmation of the contract.
We offer all kinds of plastic moulds and parts for electronic industry, precise plastic moulds for digital products, customized parts are welcome. It subject to the final confirmation of contract.
Pipe Shrinking / Expanding Machine Excellent for fast forming for furniture , bicycle , parts and tubes . The machine can be mounted with various molds for saving machining processing time while increasing efficiency. Meets flexible production requirements. Total horsepower 7.5kw.
Tube End Chamfering Machine * A circular tube modifies an interior angle and an external angel at one time with fastness and precision. * Easy to adjust the length and the number watch is clear and precise. It's simple and fast to switch the knife because of easy to buy the knife in the market. * Two-stage of cutting tool feeding and the idle stroke is smooth. It's available for adjusting the operation stroke according to the cutting volume. * There are automatic and manual functions for option, which are convenient for adjusting the machine. * A special and automatic setting device. Available to set the position, do the feeding, blending, and adjust the tolerance of the length. * The cutting tool doesn't feed if there is no material in order to prevent from impacting to reduce wearing the cutting tool. * There is a pause switch at the final point so as to assure the flat plane and the accurate right angle of the work piece. * The axle head with phosphor & copper bushing can prolong the durability.
Auto accessories series
