Xps foam board production line
Model: pts135-150-xf
Output: 300 - 350 kg/h or 180 - 200 m3/24h
Model: pts150-200-xf
Output: 400 - 550 kg/h or 300 - 320 m3/24h
Product: extruded polystyrene (xps) foam board
Board width: 600 mm, 900mm, 1200mm after trimmed.
Board thickness: 20mm--100mm
Density: 30-40kg/ m3
Material: polystyrene(ps)
Blowing agent: freon(hfc, hcfc, co2)
Standard configration
1 mixing system
2 feeding system
3 primary extruder
4 metering pump
5 hydraulic screen changer
6 secondary extruder
7 slot die
8 oil temperature controller
9 board calibrator
10 first haul-off system
11 take-off system
12 cut-to-width system
13 second haul-off system
14 cut-to-length system
15 electrical control equipment
* margin recycle system (ptrecyclertm)
* optional finishing machines
1 embossing unit
2 planer (rough; fine)
3 groover (straight; dovetail)
4 edge trimmer (sl; rc; tg)
5 slice cutting machine
6 aluminium foil composite machine
Painted with anti-corrosion oil, and covered with plastic film, then packed in wooden box.
1 set in three 40' containers.
This line is applicable to produce XPS foaming sheet. With most advanced design and equipments, it can make sure finished sheets with smooth and shining structure. Export packaging.
XPS (Extruded Polystyrene) foam insulation boards are commonly available in 4x8-foot sheets. These sheets are used for various insulation applications in construction, such as insulating walls, roofs, and floors. XPS insulation is known for its closed-cell structure, which provides good thermal resistance and moisture resistance.
Supplier: Eva foam sheets, expansion joint filler boards, xlpe foam sheets
Buyer: Eva granules, ldpe granules
Itemproperty index Typexps board Brandjat Compressive strength150kpa Moisture permeability3.0ng/(pa8226; m 8226;s) Water absorption1.5%(in water for 96h) Density30-40kg/m3 Thermal conductivity
MTPU is microcellular TPU foam, produced using thermoplastic polyurethane (TPU) as the composition with clean supercritical carbon dioxide as blowing agent to form a large number of microcells in the matrix. Characteristic: Light weight Clean and environmental friendly Good cushion performance Excellent low temperature resistance Good chemical resistance Recyclable Outstanding resilience High tensile strength M-TPU12: Density: 0.12 g/cm3 Hardness: 23 HC M-TPU16: Density: 0.16 g/cm3 Hardness: 27 HC Application: Yoga mat, shoe insole, midsole, Protective gears M-TPU20: Density: 0.20g/cm3 Hardness: 34 HC Applications: Chemical mechanical polishing pads Camera
Supplier: We are importers and exporters of
1) recycle paper and tyre, paper product duplex, occ and ncc, ceramic tiles & sanitary wares, plastic recycle product ldpe.
2) industrial items : all kind of tarpaulin, pp corrugated sheets, ptfe lined pipes , fitting flanges , bar cutting and bending machineries, wood processing machineries,
3) oil & gas industries: all mech items pipes/ fittings // flangs and mech packages
4) soda ash, bicarb, free flowing edible and industrial salts etc
5) fmcg, atop, namkeens, foodstuff, pulses, grains, spices & besan, sarabati fresh chakki atta & maida. etc
Services: Import export trading
PVC foam board ,with sound insulation,sound absorption, insulation,thermal insulation properties.All products are moisture, mold, non-absorbent properties,can be safety using, all series of products maade by the weature formula,its color can be long time using and anti-aging
We are producers of co-extruded PE Lamination Film, also known as Sealing Film for sheets, rolls, and pouches for cold or thermal applications. These PE films are suitable for food and pharmaceutical packaging with 100% virgin FDA-approved PE. You may request a quote online for this product via our E-Catalogue at Indevcogroup.com Our Lamination Films characteristics: â?¢ Superb sealability & strong tack force for Form-Fill-Seal (FFS) machines Excellent stability & performance on high-speed lines Excellent transparency, tearing resistance, chemical & grease resistance Our Plants also produce PE Films for Printing, PE Protective Film & PE Release Film.
This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.