Find Verified Industrial Tapes Films Suppliers, Manufacturers and Wholesalers

For friction materials, brake linings etc.

20 kg bag.

I description:
Polyethylene anticorrosive tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine

structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: special blend of stabilized polyethylene

Iii Features
Excellent adhesion to pipe and self
Resistant to uv
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets astm d 1000 standard
Cold applied

Technical datas:
Inner wrap tape: xunda-t 100 series

TypeT-150T-165T-180
Total thickness0.51 mm0.65 mm0.80 mm
Polyethylene film0.31 mm0.34 mm0.39 mm
Synthetic adhesive0.20 mm0.31 mm0.41 mm
Elongation at break„d 400%
Tensile strength60 n/cm61.2 n/cm63 n/cm
Yield strength35.5 n/cm42.3 n/cm45.5 n/cm
Peel adhesion to primed pipe21.2 n/cm26.5 n/cm33.2 n/cm
Dielectric strength35 kv/mm45.8 kv/mm48 kv/mm
Cathodic disbandment0.24 in radius 6.4 mm
Volume resistivity2.5 x 1012 ohm.M
Water vapor transmission rate „t 0.1gm/m2/24h
Water absorption rate < 0.06%
Recommended application temperature -5 to +600 c
Max serve temperature-40 to + 800 c
ColorBlack
Available roll size (width x length)2" to 9" x 50 to800 feet.


Paper cartons packing with waterproof membrane.

Polyethylene anticorrosion tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.

The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
Ii structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: special blend of stabilized polyethylene
Iii features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets astm d 1000 standard
Cold applied
technical datas:

Outer wrap tape: xunda-t200 series

TypeT 250T 265T 280
Total thickness0.51 mm0.65 mm0.80 mm
Film0.38 mm0.51 mm0.63 mm
Adhesive0.13 mm0.14 mm0.17 mm
Elongation at break„d 400%
Tensile strength45.3 n/cm50.8 n/cm60.1 n/cm
Yield strength35.9 n/cm43.4 n/cm45.8 n/cm
Dielectric breakdown32.9 kv/mm43.5 kv/mm45.2 kv/mm
Cathodic disbandment0.24 in radius 6.4 mm
Volume resistivity2.5 x 1012 ohm.M
Water vapor transmission rate „t 0.08 gm/m2/24h
Water absorption rate < 0.07%
Recommended application temperature -50 to +600 c
ColorWhite
Available roll size (width x length)2" to 9" x 50 to 800 feet.


Paper carton packing with waterproof membrane.

Polyethylene joint tape is cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing.
The joint wrap tape shall be applied by hand or with a wrapping machine.

II structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: special blend of stabilized polyethylene

III features:
Heavy duty adhesive
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Conformable to irregular shapes.
Meets astm d 1000 standard
Cold applied
Technical datas:
ItemT-365T-380T-3100T-3130
Total thickness (mm)0.640.761.021.27
Backing thickness (mm)0.280.300.350.50
Adhesive thickness (mm)0.360.460.670.77
Tensile strength (n/ cm)456080100
Elongation (%)400 450450500
Adhesion to prime pipe (n/cm)25
Dielectric strength (kv/cm)404242.545
Volume resistivity.M)2.5x10122.5x10122.5x10122.5x1012
Water vapor transmission rate24h0.1
Water absorptivity (%)0.10.1
Uv resistance 600h80 %80 %80 %80 %
Application temperature -5 to 60 0 c
Max serve temperature-40 to 80.


Paper carton packaging with waterproof membrane.

Polyethylene 3ply tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. It is a three-ply cold applied tape with stabilised polyethylene bcking and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine
Features:
Excellent bonding between adhesive and carrier film via co-extruded intermediate layer.
Mechanically highly resistant tape system.
Practically impermeable to water vapour and oxygen.
Resistant to soil bacterial and soil electrolyte.
Compatible with coating from PE, PP, FBE, PU, CTe and bitumen and EXT
A total coating system with:
High adhesion and shear resistance
Resistance to corrosion disbondment
High electrical resistance
High dielectric strength
High corrosion protection for steel substrates
Iii technical datas
Properties UnitT 480T 4100Test method
Color carrie film
Adhesive inner layer
Adhesive outer layer--Black(grey/green)
Black
BlackBlack(grey/green)
Black
Blac--
Thickness carrie film
Internal adhesive
External ahesiveMm
Mm
Mm0.3
0.34
0.160.3
0.45
0.25Astm d 1000
Tensile strengthN/cm6770Astmd1000
Elongation at break%450500Astmd1000
Peel strength to pipe surface at 23
At 50N/cm
18
1.3
20
1.5En 12068
Annex c
Peel strength tape to tape at 23 at 50N/cm
25
3.5
30
4.0En 12068
Annex b
Dielectric strengthKv/mm3233.8Astmd149
Insulation resistanceOhm.M÷10121012En 12068
Water vapor transmissionG/ m2 /24h0.10.1Astm e 96
Brittleness temperature-464-464Din53372
Water absorption%0.1 max0.1 maxAstm d 570
Impact resistance at 23¡æJ1818En 12068
Cathodic disbandment at 23¡æc
At 50¡æcMm15
3015
30
En 12068
Lap shear strength at 50N/mm20.050.05En 12068.


Paper cartons packaging with waterproof menmbrane.

18 x 24 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color
26 x 33 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color
30 x 36 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color
36 x 39 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color

16 x 26 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color

17 x 23 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color
16 x 20 (inch), 20mic, 25 mic, 30mic, 35mic, 40mic, 50mic, 60mic, 110mic, thickness different color.


4 rolls in 1 paper case, 25 pcs bags in 1 roll , 100 bags in each paper case. Pe packing isolated moisture, paper carton for every roll reduce transfer broken.

35 g,Roll Width 1M (40 inches),Length 320 yard , Cold water soluble
40 g,Roll Width 1M (40 inches),Length 320 yard , Cold water soluble
50 g,Roll Width 1M (40 inches),Length 320 yard , Cold water soluble
60 g,Roll Width 1M (40 inches),Length 320 yard , Cold water soluble

35 g,Roll Width 1.5M(59 inches),Length 320 yard , Cold water soluble
40 g,Roll Width 1.5M(59 inches),Length 320 yard , Cold water soluble
50 g,Roll Width 1.5M(59 inches),Length 320 yard , Cold water soluble
60 g,Roll Width 1.5M(59 inches),Length 320 yard , Cold water soluble

35 g,Roll Width 1.55M(61 inches),Length 320 yard , Cold water soluble
40 g,Roll Width 1.55M(61 inches),Length 320 yard , Cold water soluble
50 g,Roll Width 1.55M(61 inches),Length 320 yard , Cold water soluble
60 g,Roll Width 1.55M(61 inches),Length 320 yard , Cold water soluble

35 g,Roll Width 1.60M(63 inches),Length 320 yard , Cold water soluble
40 g,Roll Width 1.60M(63 inches),Length 320 yard , Cold water soluble
50 g,Roll Width 1.60M(63 inches),Length 320 yard , Cold water soluble
60 g,Roll Width 1.60M(63 inches),Length 320 yard , Cold water soluble

35 g,Roll Width 1.70M(67 inches),Length 320 yard , Cold water soluble
40 g,Roll Width 1.70M(67 inches),Length 320 yard , Cold water soluble
50 g,Roll Width 1.70M(67 inches),Length 320 yard , Cold water soluble
60 g,Roll Width 1.70M(67 inches),Length 320 yard , Cold water soluble

35 g,Roll Width 1M (40 inches),Length 320 yard , Hot water soluble
40 g,Roll Width 1M (40 inches),Length 320 yard , Hot water soluble
50 g,Roll Width 1M (40 inches),Length 320 yard , Hot water soluble
60 g,Roll Width 1M (40 inches),Length 320 yard , Hot water soluble

35 g,Roll Width 1.5M(59 inches),Length 320 yard , Hot water soluble
40 g,Roll Width 1.5M(59 inches),Length 320 yard , Hot water soluble
50 g,Roll Width 1.5M(59 inches),Length 320 yard , Hot water soluble
60 g,Roll Width 1.5M(59 inches),Length 320 yard , Hot water soluble

35 g,Roll Width 1.55M(61 inches),Length 320 yard , Hot water soluble
40 g,Roll Width 1.55M(61 inches),Length 320 yard , Hot water soluble
50 g,Roll Width 1.55M(61 inches),Length 320 yard , Hot water soluble
60 g,Roll Width 1.55M(61 inches),Length 320 yard , Hot water soluble

35 g,Roll Width 1.60M(63 inches),Length 320 yard , Hot water soluble
40 g,Roll Width 1.60M(63 inches),Length 320 yard , Hot water soluble
50 g,Roll Width 1.60M(63 inches),Length 320 yard , Hot water soluble
60 g,Roll Width 1.60M(63 inches),Length 320 yard , Hot water soluble

35 g,Roll Width 1.70M(67 inches),Length 320 yard , Hot water soluble
40 g,Roll Width 1.70M(67 inches),Length 320 yard , Hot water soluble
50 g,Roll Width 1.70M(67 inches),Length 320 yard , Hot water soluble
60 g,Roll Width 1.70M(67 inches),Length 320 yard , Hot water soluble.


PE protect film packing.

1. Adhesive: Water based acrylic adhesive
2. Carrier/Backing: Biaxially-oriented polypropylene (BOPP) film
3. Thickness: 35mic-65mic (total)
4. Width: 10.5mm-1280mm
5. Length: Max 4000m
6. Core: 3" internal diameter neutral
7. Print: Personalized up to four colours
8. Packing:
1) Cardboard boxes with 36 or 72 rolls
2) Possibility to personalize the boxes with printing
9. Certifications: ISO 9001:2008, SGS Test
10. Customizing Service:
1) Semi-finished products (Jumbo roll) and finished products (small roll) can be provided
2) OEM service is available.


1. Shipping, packaging, bundling, wrapping.
2. Ideal for sealing of cartons, merchandise, pallets
3. Excellent performer for both hand and machine application.

1. Width (mm): 120/ 250 / 300 / 400 / 450 / 500
2. Length (meters): 250 / 300 / 350 / 450 for mamual use, 1000 / 1200 / 1500 for auto use
3. Color: Transparent / Black / Colored
4. Papre Core Dia (inch): 1" / 1.5" / 2" / 3"
5. Remark:
1) Special size can be made accordingly to customers' requirement
2) OEM is available.


Packaging: 4 or 6 rolls/carton or customized.

1. Width (mm): 250 / 500 / 750
2. Length (meters): 1,500 / 1,800
3. Color: Green / Blue / White / Black / Customized
4. Paper Core Dia: 76mm (3")
5. Packing: 1 Roll/ Ctn
Remarks
1) Special size can be made accordingly to customers' requirement
2) OEM is available.


Packing: 1 Roll/ Ctn.

Specifications:
Width: 15cm-90cm
Length: 20m-3000m,
Thickness: 15um-40um,
Size can be customized according to your specification

Application:
Supermarkets, catering, hotel, airline, restaurants, household etc.

Characteristic:
1. Use: suitable for the refrigerator ,keep the food,fruits and vegetables freshness.
2. Stretchability, gloss and transparency;
3. Pre-stretch rate: 100%-400%.
4. Inner packing : paper roll core
5. Surface packing: Color carton

Notes:
Our company can quote to you at the specifications that what you want any time.
According to customer requirements,undertake various aluminum processing operations,

To undertake all kinds of plastic processing operations.

Any size and packing can be ordered. Good service and reasonable price.






Paper carton or as your requirement.

We are need in large quantity of PET films (PET release film, polyester film, SKC protective film).


.

We manufacture masking film in various grades for various applications (laminates, veneers, acp, color coated sheets, steel).

We can supply masking/surface protection film from 25micron- 80 micron for any type of surface finish in any width (3ft, 4ft, 5ft etc).

3inch or 6 inch paper core
Optical density : 1.8 or 2.2.


Plywood packaging.

Material : HDPE
Type: masking film
Usage: car paint masking
Feathure: electrostaic adhesion
Hardness: soft
Processing type: blow molding
Transparency: transparent.


Size: 3.8mx100m/4mx150m/4.8mx150m/4.87mx120m
Thickness: 0.01mm.

Stretch film/Pallet Wrap is wrapped around pallets, boxes or bundling small items etc.
It ensures safe & secure delivery of packages.
Protects shipment from water, dirt, moisture & damage caused by excess movement.
Stretch Film is economical, tough, and durable.
100 %Recyclable and EcoFriendly.
Doesn't make a loud noise like blown film.

PE/EVA anti-aging and anti-dripping film
Properties: anti-aging, anti-dripping
Thickness: 0.06-020mm
Width: 5-18m.

EVOH film
Properties: anti-aging, anti-dripping and anti-fogging
Thickness: 0.06-0.20mm
Width: 5-24m.

PE film
Properties: Anti-aging, anti-dripping, anti-fogging, anti-UV
Thickness: 0.06-0.20mm
Width: 5-18m.

Five layer co-extrusion PO film
Properties: synchro long time, anti-aging, anti-dripping, anti-fogging
Thickness: 0.06-0.20mm
Width: 5-24m.