Polyethylene anticorrosion tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
Ii structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: special blend of stabilized polyethylene
Iii features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets astm d 1000 standard
Cold applied
technical datas:
Outer wrap tape: xunda-t200 series
TypeT 250T 265T 280
Total thickness0.51 mm0.65 mm0.80 mm
Film0.38 mm0.51 mm0.63 mm
Adhesive0.13 mm0.14 mm0.17 mm
Elongation at break„d 400%
Tensile strength45.3 n/cm50.8 n/cm60.1 n/cm
Yield strength35.9 n/cm43.4 n/cm45.8 n/cm
Dielectric breakdown32.9 kv/mm43.5 kv/mm45.2 kv/mm
Cathodic disbandment0.24 in radius 6.4 mm
Volume resistivity2.5 x 1012 ohm.M
Water vapor transmission rate „t 0.08 gm/m2/24h
Water absorption rate < 0.07%
Recommended application temperature -50 to +600 c
ColorWhite
Available roll size (width x length)2" to 9" x 50 to 800 feet.
Paper carton packing with waterproof membrane.
I description: Polyethylene anticorrosive tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii Features Excellent adhesion to pipe and self Resistant to uv Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied Technical datas: Inner wrap tape: xunda-t 100 series TypeT-150T-165T-180 Total thickness0.51 mm0.65 mm0.80 mm Polyethylene film0.31 mm0.34 mm0.39 mm Synthetic adhesive0.20 mm0.31 mm0.41 mm Elongation at break„d 400% Tensile strength60 n/cm61.2 n/cm63 n/cm Yield strength35.5 n/cm42.3 n/cm45.5 n/cm Peel adhesion to primed pipe21.2 n/cm26.5 n/cm33.2 n/cm Dielectric strength35 kv/mm45.8 kv/mm48 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.1gm/m2/24h Water absorption rate < 0.06% Recommended application temperature -5 to +600 c Max serve temperature-40 to + 800 c ColorBlack Available roll size (width x length)2" to 9" x 50 to800 feet. Paper cartons packing with waterproof membrane.
Polyethylene joint tape is cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. The joint wrap tape shall be applied by hand or with a wrapping machine. II structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene III features: Heavy duty adhesive Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Conformable to irregular shapes. Meets astm d 1000 standard Cold applied Technical datas: ItemT-365T-380T-3100T-3130 Total thickness (mm)0.640.761.021.27 Backing thickness (mm)0.280.300.350.50 Adhesive thickness (mm)0.360.460.670.77 Tensile strength (n/ cm)456080100 Elongation (%)400 450450500 Adhesion to prime pipe (n/cm)25 Dielectric strength (kv/cm)404242.545 Volume resistivity.M)2.5x10122.5x10122.5x10122.5x1012 Water vapor transmission rate24h0.1 Water absorptivity (%)0.10.1 Uv resistance 600h80 %80 %80 %80 % Application temperature -5 to 60 0 c Max serve temperature-40 to 80. Paper carton packaging with waterproof membrane.
Polyethylene 3ply tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. It is a three-ply cold applied tape with stabilised polyethylene bcking and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine Features: Excellent bonding between adhesive and carrier film via co-extruded intermediate layer. Mechanically highly resistant tape system. Practically impermeable to water vapour and oxygen. Resistant to soil bacterial and soil electrolyte. Compatible with coating from PE, PP, FBE, PU, CTe and bitumen and EXT A total coating system with: High adhesion and shear resistance Resistance to corrosion disbondment High electrical resistance High dielectric strength High corrosion protection for steel substrates Iii technical datas Properties UnitT 480T 4100Test method Color carrie film Adhesive inner layer Adhesive outer layer--Black(grey/green) Black BlackBlack(grey/green) Black Blac-- Thickness carrie film Internal adhesive External ahesiveMm Mm Mm0.3 0.34 0.160.3 0.45 0.25Astm d 1000 Tensile strengthN/cm6770Astmd1000 Elongation at break%450500Astmd1000 Peel strength to pipe surface at 23 At 50N/cm 18 1.3 20 1.5En 12068 Annex c Peel strength tape to tape at 23 at 50N/cm 25 3.5 30 4.0En 12068 Annex b Dielectric strengthKv/mm3233.8Astmd149 Insulation resistanceOhm.M÷10121012En 12068 Water vapor transmissionG/ m2 /24h0.10.1Astm e 96 Brittleness temperature-464-464Din53372 Water absorption%0.1 max0.1 maxAstm d 570 Impact resistance at 23¡æJ1818En 12068 Cathodic disbandment at 23¡æc At 50¡æcMm15 3015 30 En 12068 Lap shear strength at 50N/mm20.050.05En 12068. Paper cartons packaging with waterproof menmbrane.
Supplier: Polyethylene anticorrosive tape
Inner tape Name: inner wrap tape for cold applied tape coating Type: t-140, t-150, t-165, t180, t1100, t1130 Price: fob ningbo or shanghai Place of production: china Brand: ideal Term: l/c, t/t Volume: 8, 000, 000sqm/yr Packing: carton Features: The specification of the tape consists of two layers, adhesive and film Inner layer: butyl rubber Outer layer: polyethylene Thickness: 0.40 - 1.30mm Width: 50, 75, 100, 150, 230, 300mm Length: 30 - 200m Tapes specifications: T-140 with 0.38mm / 15mil thickness and 50 - 230mm width T-150 with 0.51mm / 20mil thickness and 50 - 230mm width T-165 with 0.64mm / 25mil thickness and 50 - 230mm width T-180 with 0.76mm / 30mil thickness and 50 - 230mm width T-1100 with 1.02mm / 40mil thickness and 50 - 230mm width T-1130 with 1.27mm / 50mil thickness and 50 - 230mm width 38kg/box
Jining XunDa Anticorrosion tape for pipeline 100 Series is polyethylene cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. Usage and Features:1. Widely used on underground and overhead pipelines anticorrosion protection system. 2. Excellent adhesion to pipe and self 3. Resistant to UV 4. Can be applied over a wide temperature range from-30¡ãC to 80¡ãC 5. Good conformability and consistent uniform thickness 6. Cold applied ,and easily applied with no special equipment 7. Compatible with common pipe coatings 8. Excellent resistance to cathodic disbonding 9. Meets ASTM D 1000 Standard 10. Long term corrosion protection and mechanical resistance The tape consists of two layers, adhensive and filmInner layer: butyl rubberOuter layer: polyethyleneThickness: 0.35 - 1.30mmWidth: 50-300mmLength: 30 - 200mTapes specifications: 1) T-150 with 0.51mm / 20mil thickness and 50 - 300mm width2) T-165 with 0.65mm / 25mil thickness and 50 - 300mm width3) T-180 with 0.80mm / 30mil thickness and 50 - 300mm width packing in carton
Anticorrosion Tape for underground steel pipeline It is a cold applied tape coating system ,designed for corrosion protection of underground steel pipeline .
Supplier: Cold applied adhesive tape, polyethylene tape, anticorrosion material, steel pipe coating systems, steel pipe fittings, pe tape
Xunda anti corrosive tape for underground pipe wrap tape Xunda tape is mainly engaged in five series of products, which are inner tape, outer tape, joint tape, tape primer, and putty codd categories in nearly 100 specifications. They can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc. 1.1 inner tape: (anticorrosion tape, anti corrosion tape, anticorrosive tape) is for anticorrosion of underground, underwater, & overhead pipelines. 1.2 outer tape: (protection tape, protective tape) is for protection of pipe and the surface of inner tape from damages. 1.3 joint tape: (polyethylene tape, polyethylene tapes, pe tape, rubber tape, butyl tape, butyl rubber tape) is for anticorrosion of field joints, fittings, & specifically piping. Component: backing: polyethylene pe & adhesive: butyl rubber Thickness: 0.38mm to 1.27mm, Width: 50mm to 300mm Length: 30 to 300m 1.4 tape primer: (synthetic primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape. P19: solid content 19%; P27: solid content 27%.