Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete
Mo1 99.95% Molybdenum Plate Moly Foils Annealed For Furnace Heating Elements Molybdenum foils from 0.005 inches to 0.150 inches in thickness is classified as molybdenum refractory sheet. It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields. Molybdenum sheets from 0.187 inches to 3 inches in thickness is classified as Molybdenum refractory plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. Moly Foils Features: Purity: >=99.95% Density: >=10.1g/cm3 Thickness: >=0.05mm Width: 20-600mm Length: Less than 2000mm Grade: Mo1, TZM, Mo-La Standard: ASTM, GB3876-83 Surface: Hot rolls, bright, ground
Provide W-1 99.95% Tungsten Products Wolfram Plates for Vacuum Furnace / Sapphire Growth Tungsten metal has high melting point, good thermal and electrical conductivity as well as low vapor pressure at high temperatures. Such properties make tungsten metal a candidate for use as a high performance material in a variety of high temperature products and processes. In spite of its characteristic of oxidizing easily when heated in air, tungsten metal is widely utilized as a heating element material in industrial furnaces. Pure Tungsten Plates Specifications: Purity: >=99.95% Density: 19.3g/cm3 Size: T0.05-50mmxW50-500mmxL100-1000mm Surface: Chemical cleaned/polished Standard: ASTM B760/GB T3875
www.fotmacarbide.com provide High Purity Molybdenum Electrodes for Heating Furnace / Glass Melting Furnace Thanks to the great characteristics such as high strength, oxidation resistance under high working temperature and long service life, molybdenum electrodes are commonly used in daily glass, optical glass, insulation materials, glass fiber, rare earth industry and other fields. Instead of the original heavy oil and gas energy, the use of molybdenum electrodes can effectively reduce the pollution of the environment and provide the quality of glass. Glass melting molybdenum electrodes must withstand extremely high temperatures and aggressive glass melts. High purity molybdenum is the right material for these challenging conditions.
Lf-typed ladle refining furnace is used for refining molten steel from primary melting furnace (eaf or convertor), can create a slightly positive pressure reducing atmosphere, apply such means as submerged arc heating, argon stirring, white slag refining, alloy composition trimming, wire feeding under the atmosphere to conduct degassing, desulfuration, decontamination for hot metal, and accurately control the ingredients and temperature of molten steel. The equipment also has an effect of buffering and adjusting continuous casting links. It consists of: Transformer for electric furnace, network, electrode lifting and lowering device, ladle lid and ladle lid lifting and lowering device, heating bridge frame, steel ladle, ladle carrier, wire feeder, argon regulating system, water cooling system, compressed air system, hydraulic system, temperature measurement and sampling system, automatic charging system, high-voltage power supply system, low-voltage electrical control system and automation system, etc. Type of lf furnace : Bridge type or the type with independent rack mount and furnace cover; single arm or three-arm; ladle revolving platform or furnace lid rotary type, etc.
VOD Vacuum Ladle Refining Furnace Vd / vod type vacuum refining furnace can adopt either single or dual station. Overhead, pit or vehicle-mounted arrangement can be selected for vacuum tank. Unscrewing and vehicle-mounted movement are optional ways for movement of the vacuum tank It consists of: Vacuum tank, vacuum tank cover and lifting mechanism of the cover, steel ladle, oxygen lance mechanism, vacuum charging device, temperature measurement and sampling and observation system, oxygen system, argon system, cooling water system, vacuum pump system, etc. Technical parameters Rated capacity
SHS type black annealing equipment specializes in heating steel pipe to black annealing treatment temperature, and then cooling it to indoor temperature by water. Advanced inductor heating power is new type DSP+IGBT structure energy-efficient production. It is IGBT inversion and employ DSP do full digital accurate control, full air cooling structure (inductor water cooling) reduces system loss. It has set with self-protection and self-diagnostic function. It can save about 15% energy than congeneric product. Material applied: 300series austenite, 400 series ferrite, dual-phase steel (Note: According to pipe diameter,thickness and production speed to match power. Moreover, the steel pipes need to be pickled after annealing.)
1.Power system a.Medium frequency power that inverter by IGBT transistor b.Slot compensation power 2.Movable bright annealing section and cooling tunnel c.Induction heating section d.Heat preservation section e.Cooling water tunnel f.Gas protection device g.Infrared thermometer h.Gas pressure detector i.Circulating-outside water colling system 3.Electrical control system
Packaged Immersion Fired Boilers - Steam - Hot Water - Glycol - Low NOx - 10 to 800 HP Oil/Gas Fired Firetube Boilers, Coal boilers Pressure Vessels (CS and SS) Cast Iron Package Boilers Controls - Most Major Brands Registered Quality Control Program (Alberta Registration ~ AQP-1036) Registered Safety Program (#99-12-1658)
Biomass dry distillation carbonization furnace is Dingli new model products. The machine adopts an advanced thermal dry distillation carbonization technology. It greatly increases the carbonization rate from 85% to 98%, which is an easy operation, safe and protection environmental, and high production efficiency, which can save a lot of energy. It is the ideal equipment of coal, gas, oil, power plant. More sets of combined distillation carbonization furnace use the hoisting composite structure. It uses the hanging from the cooling method to shorten the production product date. And the efficiency of charcoal production is improved. meanwhile using a unique carbon gas (volatile hydrogen material and tar etc.) back burning technology. The flue gas produced by carbonization is sufficient usage. In addition to satisfied the demand of heat stove, to achieve energy conservation and environmental protection requirements. The excess gas can be a heat source for dryer, which can save a lot of fuel in the production. That improves the benefit of the enterprise. Carbonized without using dynamic electricity. It uses mobile production, simple and convenient operation. It is an ideal equipment for large-scale charcoal production.
Dingli horizontal dry distillation carbonization furnace is specially used for log, wood, jute stick, and other long rod-type biomass characteristics adopts horizontal structure, cart entry, and exit raw material and the advanced hot gas dry carbonization process technology, using a unique carbonization flue gas (volatile hydrogen material and tar, etc.) Back Burning Technology, make full use of the flue gas produced by carbonization process, meet the thermal needs of carbonization furnace itself, greatly increase the carbonization rate, the carbonization rate increased from 80% to more than 95%, and easy to operate, safety and environmental protection, high production efficiency, can save a lot of energy, is the ideal equipment for carbonizing the long rod type biomass material. The combination mode of multiple devices, use carbonized flue gas in tandem, can reduce fuel consumption during carbonization production and improve the enterprise benefit.
Dingli biomass dry distillation carbonization furnace is composed of a carbonization furnace body, furnace cover, inner tank, material cage, combustible gas return pipe, exhaust pipe, flue gas dust removal device, tank lifting device, and thermometer. The furnace adopts the principle of anaerobic dry distillation to remove the volatile substances in the biomass and achieve the purpose of biomass carbonization. Carbonization process has four steps: charging sealing furnace - preheat drying - anaerobic carbonization - cooling carbon.
Arij Global Trading & Marketing supplies both Ground Granulated Blast Furnace Slag (GGBFS) and Granulated Blast Furnace Slag (GBFS). In order to receive the specification of White Cement plus its price, please let us know. We will be there for your business.
Induction heating furnace is mainly applied for high temperature graphitization treatment of C/C, graphite, carbon fiber insulation refractory materials.
Horizontal Sinter furnace is mainly used for reaction sintering, low pressure sintering, re-crystal sintering, HIP sintering of Sic ceramic product and it can also applied for sintering of Si3N4a and other ceramic parts.
Continuous pre-oxidation furnace is applied for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
Continuous carbonization furnace is mainly used for the continuous high temperature carbonization under controlled atmosphere of all carbon fibers, silicon carbide fibers and felt materials. It has mesh belt type and no belt type and it is equipped with optional continuous activation and high temperature graphitization treatment.
Horizontal CVD furnace (Carbon) is applied for composite material CVD that used hydrocarbon gas (like C3H8) as carbon sources, which works on CVD and CVI treatment for carbon materials.
Horizontal CVD tube furnace (Silicon Carbide) uses methyltrichlorosilane (MTS) as air source to make material surface oxidation resistant coating and change characters of matrix material.
Vertical CVDtubefurnace (Silicon Carbide) adopts methyltrichlorosilane (MTS) as air source to make material surface oxidation resistant coating and change characters of matrix material.
