Continuous pre-oxidation furnace is applied for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
Continuous Coconut Shell Carbonization Furnace This machine is equipped with:Auto-feeding Conveyor, Biomass Gasifier equipment, Dust-Removal Device, Gas cleaner system, PLC controlled and manual / automatic dual- control System, Cooling and Discharging conveyor, Carbonization Furnace and other equipments. While Carbonization of the raw material inside of the Carbonization Furnace (like coconut shell, sawdust, Palm shell, rice husk, straw, wood scrap etc.), the produced Flue Gas is recirculated in pipeline and is fed back to Heating System after purification, becomes combustible gas (carbon monoxide, methane, ethane). When the temperature reached, Carbonization furnace starting carbonizing the raw materials fed, producing the flue gases, which becomes a combustible gas after spray pour, cooling purification by the cooling purification system, to continue the carbonization Process, then Gasifier stops working or set on the minimal use. Temperature is been regulated and controlled by control system. The Feeding of the Raw Material is also regulated for the Qualified End Product. Based on the requirement of the Plant ie output of the finished Product, we can deploy a set of Furnace or Bank of furnace to yield the desired production quantum. Plant Capacities : 300 kg/hr to 2000 Kgs/hr continuous type.
Usage:widely used for engineering machinery, auto parts, fasteners, bearings, chains, metal tools and precision parts industries quenching carburizing. Features: (1)electricity-saving:adopt high tensile calcium silicate board, ceramic fiber board, heat-resistant material for high Performance. (2)operation:adopt automatic control to save manual cost. (3)quality:equipped with a variable step string fan on the top of the furnace to get uniform temperature for high quality. (4) atmosphere:adopt methanol decomposition to stabilize gas and to ensure for quality. (5) stability: cp value tolerance±0.03%(carbon potential), and temperature equally dispersed at ±5?.
Continuous carbonization furnace is mainly used for the continuous high temperature carbonization under controlled atmosphere of all carbon fibers, silicon carbide fibers and felt materials. It has mesh belt type and no belt type and it is equipped with optional continuous activation and high temperature graphitization treatment.
Supplier: Magnesium alloy ingot furnace
Buyer: Magnesium ingot, die casting parts
A cubical shell furnace, which will be stationary furnace, used in melting all kinds of non-ferrous melting, lead oxide kettle, zinc kettle etc., indirect type melting ensures the loss of metals due to oxidation/carbon deposit by the fuel or combustion properties. Furnace is lined with refractory and insulation brick to hold the liquid metal to a temperature of 1200 deg.C. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace. Our specialties are manual operating furnace, automatic operating furnace, air/fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system.
Technical code 1. Melting furnace Upright cupola 2. Melting speed of copper plate 8-16t/h 3. Time of starting melt 2h 4. Material feeding mode Skip bucket style 5. Capacity of material feeding lifter 3t 6. type of heat retaining furnace hydraulic incline and action type 7. Effective volume of heat retaining furnace 6-10t 8. Max. incline and action angle of heat retaining furnace ¬â70 íµ 9. Oxygen consumed amount of copper furnace (copper bar per ton at normal production NG:50-70m3 LPG:40-60kg 10. shaft furnace and inner line of holding furnace All use sic molding brick 11. up and low flow slot Closed style integrated flow slot 12. fuel to be used NG/LPG 13. Diameter of gas supply NG:DN100-150/LPG:DN80-100.
Medium frequency furnace.
1. Shaft furnace holding furnace up and down launder feeding device hydraulic transmission unit of holding furnace. 2. Shaft furnace holding furnace premixed burner of up and down launder include the control system multistage pressure blower system on-line automatic sampling controlled by plc co continuous automatic detecting system. Melting speed:6-20t/h Start time of melting:
Aluminum dross processing machine/aluminum dross processor:aluminum dross processing machine is a machine that adpots advanced foreign technology, which is mainly used to separate the aluminum form the aluminum dross, that is to say recyle the aluminum for reusage.The aluminum dross processing machine is special designed to process the hot aluminum dross, aluminm ash, aluminum slag that generated form the aluminum melting furnaces, holding furnace etc.Our hl-900, hl-1100, hl-1300 aluminum dross processor which could process about 100kg-500 kg at a time in about 12 minutes. The aluminum recyclying rate can be at least 80%.Using metech aluminum dross processing machine, which has below advantages:1.No need for any fuel in the whole process, which is energy-saving.2.It is equipped with the dust collector, which is enviroment friendly3.The dross processor is full automatic mechanical operation, which is labor-saving.4.Short operating time (10-12 minutes) with high efficiecny recycling rate (90%). Itemmedium Machine Dimensionl2000 x w1800 x h3500mm Heatproof po1300x l890mm Discharge opening50 Air outlet 420x300 Main driving axledia of axle130 Motor11kw 111 Transmissionrate15 Small size dust collectorsizel1100w1100h3000mm Stainless steel vanejiangsheng motor 4kw
