Electric, Biomass & Oil fired Boilers are available.
1.Adopted European MOSFET,IGBT solid power module and advanced resonance inverter technology,high efficiency,big output power and energy saving; 2.The digital phase-locked technology achieve frequency trucking automatically,optimization of metal heating process,ensure high efficiency and high speed heating; 3.100% full duty cycle,can work for 24hours continuously.Can control the heating temperature remotely and automatically by extra Infrared Thermometer,improve the heating quality and reduce human operation; 4.Perfect protecting functions,include over-current, over voltage, water shortage, lack of phase and other fault state self-protected and display,also some other necessary functions which will ensure our heaters higher reliability and durability; 5.The time of three stages:Heating,Maintain Temperature,Cooling can be adjusted separately. Furthermore,the function of adjusting the power of Maintain Temperature independently will be effective to control the heating curve and the heating temperature,suitable for workpiece of mass production,repeatability,rapid heating.when used in brazing,adopt combination of rapid heating and maintain temperature,not only heating fast,also solder spread out fully; 6.Easily operate and the output voltage is safe for operator.
YLM thermal fluid heater is square coil horizontal chain grate shop-assembled heater, chain grate and heater proper are transferred separately. It adapts chain grate to realize mechanical feeding coal, mechanical venting by blower and induced draft fan, and mechanical discharging by slag machine. Fuel falls on the grate from coal bucket during operating and burning, high temperature smoke enters furnace by passing combustion arch, after radiation heat exchange, smoke enters convection heating surface for convection heat exchange, then goes to waste heat boiler and air heater, at last enters dust collector then is vented into the atmosphere through chimney by induced draft fan.
Our company is a enterprise of committing to the ultra-thin glass tempering,we own a fan Institute and a furnace Institute, and now,we researched and developed a new series of energy-saving,high efficiency, low noise,low temperature fans,is a great breakthrough of the ultra-thin glass tempering technology , so that,the development of the ultra-thin glass tempering furnaces stepped a new stair, at present, our companyâ?? furnaces can continuously produce the large size of 2.5mm ultra-thin glass, and won a number of national patents.At the same time, our company also provides various types of wind machines, can be applicable in many fields, can meet vairous of production requirements. In addition,we also can transfer the technology of the ultra-thin glass tempering furnaces to make a cooperation,have a common development.
Arc furnace, induction furnace, melting furnace -
Horizontal Gas Thermal Oil Boiler Features of Horizontal Oil/Gas Fired Thermal Oil Boiler 1. Reasonable Structure: Multiple coil structure, Three passes of smoke and flue, weld joint with high quality. 2. Large Heating Furnace: Aopts a large combustion chamber which increases the radiation heating furnace area, this design increase the thermay efficiency and reduce the NOX emissions. 3. High Efficiency: Adopts high thermal resistance insulating layer, increase the heat transfer and thermal efficiency. 4. High Quality Accessories: All accessories such as burners, pumps, water level controller, valves and other instruments are from international or domestic famous brands. 5. Easy Maintenance: The manhole and hand hole is easy for user to maintain. Bidragon also provide life time support for clients. 6. Professional Customized Service: We provide customized service for clients who has specific requirements for the project, including design, produce and install service.
YLL Chain Grate Biomass Pellet Fired Thermal Oil HeaterYLL Chain Grate Biomass Pellet Fired Thermal Oil Heater takes waste wood and biomass pellet as fuel, the heat transfer oils is heated in the tube first, then the high temperature thermal oil will flow in a closed loop pipes and return to the heaters again, then heat be transfers to other energy equipment in this process. Features of Biomass Fired Thermal Oil Heater 1. Low Working Pressure This biomass fired thermal oil heaters can work under lower pressure, and reach 300? at atmospheric pressure. 2. Accurate Control of Temperature Hot oil and Oil-based thermic fluid are used as heat carrier in the heating system, so it can achieve higher heating. Operator can control the temperature accurately to meet different industry demand. 3. Safe and Reliable Performance Cloth pipes in the furnace top of the boiler, it can protect the furnace top from burning out. 4. High thermal Efficiency The heat transfer fluid flow from the low place to the high place, it is convenient to discharge the gas, so it can improve the thermal efficiency of hot oil boiler. 5. Easy to Clear the Dust The middle ash removal can protect the furnace tube from clogging.
YLW Biomass Wood Fired Thermal Oil Heater A Safer Solution for Industry YLW Biomass waste wood fired thermal oil heaters takes waste wood and biomass pellet as fuel, the heat transfer oils is heated in the tube first, then the fluid thermal oil will flow in the closed circle pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited. A Higher Efficiency Bidragon biomass and wood fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple.
YGW Coal Thermal Fluid Boiler YGW Horizontal Coal Fired Thermal Fluid Boiler General Introduction This series thermal fluid boiler use heat transfer oil as medium. There is a hot oil circulating pump which in order to force the thermic fluid to flow in the closed loop circulation pipe. Then the thermal energy will be transfered to the heated object. The thermal fluid will back to the boiler furnace and be reheated. The YGW thermal fluid boiler can reach high temperature at low working pressure. It adopts advanced control system, equipped with liquid level controller, pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. It is a safe boiler with high efficiency and low power consumption.
YYL Vertical Oil Gas Thermal Oil Heater YYL Vertical oil/gas fired thermal oil heaters use oil or gas as fuel, the heat transfer oils is heated in the boiler furnace first, then the thermal oil will flow in the closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon Oil/Gas fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Features of Oil/Gas Fired Thermal Oil Heaters 1. High Temperature This Oil/Gas fired thermal oil heaters can reach 320? at low pressure. 2. Easy Operation User friendly designed control system, easy to operate. 3. Low Investment Compared with steam boiler and hot water boiler, thermal oil boiler is perfect to give user high temperature in a much safer way. It cost little in maintenance and daily process. 4. PLC Intelligent Control System The PLC control system of thermal oil heaters is suitable for high temperature and high humidity environment of long-term operation.
Vertical Thermal Oil Boiler Thermal oil boiler is a indirect heating system, it is working under low pressure, so the performance is stable and safe. Thermal oil offers the user the capability of high temperature operation at very low pressures. Due to the low operating pressure and properties of thermal fluids, most heaters are operate easily and licensed boiler operator is not typically required. Working Princeple: Liquid phase heat transfer medium is heated in the boiler, and then flow and circulated to one or multiple heat energy users in a closed loop system. The thermal oil is flow by the force of a pump, there are 2 pumps in the whole system, one working pump and another one is a spare pump, in any case the working pump stoped, the spare pump will start work immediately, so the system wont breakdown. Bidragon offers standard thermal fluid heaters, custom engineered thermal fluid heaters, complete thermal fluid systems and a full range of parts and support for your process. Thermal Oil Boiler Applicable Industry Petrochemical Industries: polymerization, melted, condensation, distillation, removal H2. Oil industry: fat and acid distillation, grease decomposition, concentrated, esterification, vacuum deodorizer, high-temperature cooking, advanced salad oil. Synthetic fiber industry: polymerization, melt spinning, extending, drying. Textile printing and dyeing industry: heat setting, hot melt dyeing, melt bake calendering drying, high temperature stenter, oar yarn. Plastics and rubber industry: hot pressing, hot cast, vulcanization molding, calendering injection machine, plastic mixer, conveyor dryer, screw extruder. Paper Industry: dry, corrugated paper processing, egg tray, food cardboard drying, calendering machine, roller. Timber industry: multilayer plywood, fiberboard molding, plywood, wood drying, steaming equipment. Building materials industry: road bitumen heating, gypsum board drying, heating bitumen concrete, concrete elements curing, drying equipment. Air-conditioning industry: industrial plants, residential and hotel building heating. Detergent Industry: cooking boiler, autoclave, spray-washing tower, a conveyorized dryer, lipolysis device distillation column. The automotive industry: the tunnel-type drying room, degreasing baths, phosphate processing equipment. Electrical equipment industry: calendering machine, the platen machines, vacuum pan, dryer.
YGL Biomass Waste Wood Fired Thermal Oil Boiler Features of Biomass Series Waste Wood Fired Thermal Oil Boiler 1. Low Working Pressure This wood fired thermal fluid heaters can work under low pressure (1.1Mpa), and reach 300? at atmospheric pressure. 2. Accurate Control System Hot oil boiler, Oil-based thermal fluid are used as heater carrier in this heating system, it can achieve higher temperature. Operator can also control the temperature accurately to meet different industry requirement. 3. Safe and Reliable Performance There are dense coils installed at the top of the heater, this design can protect the boiler furnace top from burn out. 4. High Thermal Efficiency The theramic oil flow from the low inlet to the high out let, this design will discharge gas produced during the process, and it will improve the themal efficiency.
Horizontal Thermal Fluid Heated Steam Generator The WLE Series steam generator is heated by thermal fluid boiler, it is a high efficienty and cost saving system which can provide high temperature and steam at the same time. It is frequently required by factories that they need thermal oil heating system and the steam generator at the same time, and our WLE thermal oil heater can satisfy this requirement. Compared with seperate heating system and steam generator, WLE system reduce the investment cost and maintenance cost greatly. Working Principle When the high temperature thermal oil flows through the tube, the heat will turn the water into saturated steam, the steam will release and be used. Application of Thermal Fluid Heated Steam Generator Thermal Oil Steam Generator usually be used with thermal oil heater. Widely applied in food processing, rubber industrial, wood processing, oil production industrial, etc. It can meet the requirement of using one thermal oil heater to get hot thermal oil and steam at the same time which saving a lot of equipment investment and labor cost. It uses the continuous circulated thermal oil to generate steam which can replace the steam boiler.
Electric Heating Thermal Oil Heater Electric heated thermal oil heater is a perfect solutions for factories which are located in places where the electricity is cheaper than fuels. Electrical heated thermal oil boiler only required little maintenance so the running cost can be reduced a lot too. This type of thermal oil heater use the resistive heating working principle, thermic fluid is heated by electric heating elements. It is widely used in liquid and other process heating industry.
YWL Horizontal Coal Fired Thermal Oil Heater Horizontal type coal fired thermal oil heaters use coal as fuel, the heat transfer oils is heated in the tube first, then the fluid thermal oil will flow in the closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon biomass and wood fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Advantage of YLW Coal Fired Thermal Oil Heater 1. Double dense coils installed in the boiler furnace, the heating surface is more sufficient. 2. The theramic oil flow from the low inlet to the high out let, in this way, the produced gas can easily go out of the system. 3. Automatic temperature control system, operator can adjust the temperature precisely and accurately.
YLL Vertical Coal Fired Thermal Oil Boiler Coal fired vertical thermal oil boiler use coal as fuel, the heat transfer oils is heated in the boiler first, then the thermal oil flow in a closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon biomass and wood fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Advantage of YLL Vertical Coal Fired Thermal Oil Boiler 1.The oil flow from the lower place to the high place,in this process, the produced gas can easily go out of the system. 2.Automatic feed coal fuel, automatic discharge the slags. 3.Fire grate use independent air chamber, and the air space is larger, so the burning will be more sufficiently.
YGL Coal Fired Thermal Fluid Heater YGL Coal fired thermal fluid heater can reach high temperature (Max. 320?) at low working pressure. It has stable heating performance and precise humidity control system, It also adpots a complete operating control system and safety monitoring devices.
Vertical Thermal Oil Heated Steam Generator The WLE Series steam generator is heated by thermal oil boiler, it is a high efficienty and cost saving system which can provide high temperature and steam at the same time. It is frequently required by factories that they need thermal oil heating system and the steam generator at the same time, and our WLE thermal oil heater can satisfy this requirement. Compared with seperate heating system and steam generator, WLE system reduce the investment cost and maintenance cost greatly. Working Principle When the high temperature thermal oil flows through the tube, the heat will turn the water into saturated steam, the steam will release and be used. Application of Thermal Oil Steam Generator Thermal Oil Steam Generator usually be used with thermal oil heater. Widely applied in food processing, rubber industrial, wood processing, oil production industrial, etc. It can meet the requirement of using one thermal oil heater to get hot thermal oil and steam at the same time which saving a lot of equipment investment and labor cost. It uses the continuous circulated thermal oil to generate steam which can replace the steam boiler.
Steam Accumulator If the boiler can not produce enough steam in production, the accumulator will release steam and the inner pressure will be decreased, then the water will boiling and provide more steam to keep the whole system working under stable condition. Applicable Industry Steam accumulator is widely use in iron and steel industry, metallurgy industry, textile industry, chemical fiber industry, pulp and paper industry, brewing industry, pharmaceutical industry, food processing industry, power generation industry and other industries.
