Kb 208 can be used to remove stains from hard surfaces Including metallic and non-metallic surfaces like glass, ceramic, Melamine, etc. The key to an effective cleaning depend on proper Dilution & soaking time. It’s food-grade quality allows its use in Places where cleaned surfaces may have direct contact with food. Kb 208 is designed specially for use in places where the use of Acidic products are not recommended. It’s strong disinfectant Function kills most common microbes & disease causing bacteria. Application Kb 208 must be diluted with water for soaking, dipping etc. May also be used by Brushing & scrapping. Dilution depend on soak time, for faster action use lower Dilution ratio that is higher concentration. May be diluted up to 500 times or more. It Has disinfectant function. Dosage Add about 100 gm/100 ml of kb 208 to about 100 lt. Of water or as required for Soaking and dipping. Use higher concentration for faster action and tougher stains. Agitation gives better result. Re-use solution until turbidity is high. Required to Repeat the process if necessary. When the cleaning process is complete, flush with Clean water. Use concentrated product for manual cleaning Handling & precaution This product is alkaline and should be handled with care to prevent personal injury. Avoid prolonged skin contact and breathing of the fumes. Refer to material safety Data sheet for more specific procedures and directions. Discoloration may Result when contact with colored clothing. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Cleaning vinyl surfaces from dirt, grease, oil, and dust. Suitable for carpet cleaning vinyl flooring and other vinyl surfaces. Safe to use on metal surfaces such as stainless steelm aluminum, copper, brass.
Clean the floor with a perfect and refreshing fragrance.
Kb 217 is a special water based carpet cleaner to Penetrate, emulsify and disperse oil, grease, dirt and stains on Fibers of synthetic carpets. Ideal for cleaning synthetic carpets Normally used on floors of office buildings, hotels, hospitals & Other public places. This formulation does no have any adverse Effect on painted surfaces including walls, wood and also metals Like stainless steel, aluminum, copper and brass. The room is Filled with a refreshing fragrance from kb 217 after the cleaning Work. Application Use diluted kb 217 ( 1 : 5 up to 1 : 20 with clean water ) with standard carpet Cleaning equipment like mopping machine & wet vacuum cleaner. Apply & spread The solution of kb 217 to the carpet surface and allow a soaking time of 2 – 10 Minutes before scrubbing rinsing & final mopping. The wet carpet should be Properly mopped with standard equipment & procedure until dry. Always make a test patch to confirm color fastness & soaking Time. Kb 217 can also be filled in directly into the detergent container provided with Certain carpet cleaning equipment which has a facility for it. Dosage Dilute with water depending on the cleaning work & stain. Can be diluted up to 20 Times. Direct applications of the undiluted product may be required on highly Stained areas Handling & precaution Avoid spills on eyes. Should avoid prolonged unnecessary contact with skin. May Irritate when exposed for a longer period on certain sensitive skin. Harmful if Swallowed. Keep away from children. Keep container capped in a cool dry place Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 120 is a product which effectively prevents scale and Corrosion in cooling towers having very soft waters which Are more corrosive, have a rysnar index over 7 and Calcium 25 – 75 ppm in the make-up water. It is an Excellent dispersant for calcium phosphate, iron oxides And clay. This product is used where heavy metals and Zinc is not allowed in effluent waters. Lc 120 is a Hydroxy-phosphonoacetic acid with polymers and copolymers To control scaling. It also has inorganic Phosphate and sodium tolytriazole to prevent corrosion And pitting of all metal surfaces. Application Injected directly into the circulating pipe upstream from the condenser. Cycles of concentration will vary from 5 – 20 as a probable upper limit. For Higher limits consult our laboratory. Dosage Feed lc 120 from a chemical mix tank or directly from the drum by means Of a proportioning pump at the rate of 0.5 pound / 1, 000 gallons of make-up Water. Adjust the dosage to maintain 5 – 10 ppm of orthophosphate in the Circulating water. A ph of 8.0 – 8.5 must be maintained. Handling & precaution Protective clothing and eye protection should be worn. In case of skin Contact, immediately flush thoroughly with plenty of clean water. In case of Eye contact, flush with copious of amounts of water for 15 minutes and Obtain immediate medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged .
Lc 238 is designed specially for use in systems where the use Of concentrated acidic or concentrated alkaline descalers are Not recommended. This product is specially formulated for Specific cleaning and descaling purposes for sensitive system. Lc 238 may be re-circulated by means of a high volume pump For the removal of scale. Lc 238 can be used safely on to Copper & brass surfaces besides being very effective in steel System. This product contains organic poly acrylic & polymer Compound. Application Lc 238 may be soaked overnight and re-circulated. When scale is Present, the tubes should first scraped out to remove as much as possible And then flushed out with a hose. Dosage Circulate an appropriate concentrated solution based on the scale and Corrosion. For storing / stand by system use lc 253 or lc 252. For more Detail and specific method and concentration, please consult lifechem Technical services. Handling & precaution This product ph is between 4.0 – 9.0 and should be handled with care to Prevent personal injury. Protective clothing, gloves and eye protection Should be worn. In case of skin contact, immediately flush thoroughly with Plenty of clean water. In case of eye contact, flush with copious amounts Of water for 15 minutes and consult a physician. Refer to material safety Data sheet for more specific procedures and directions. Packaging Available in pail of 20 lt.. Can also be custom packaged .
Lc 239 is a very strong descaler for destroying the most Difficult scales. It effectively removes difficult scales, rust, Oxides of metals, silica scale and hard soil from metal and Other surfaces. It’s dissolving action is quick and thorough. Most cost effective descaler when combined with lc 230, Lc 233, lc 232 and lc 231. Do not use on materials like Glazed tiles and glass. Must be used after dilution only. Application Dilute and blend with other descalers as necessary before dipping, brushing or Spraying on surfaces. Clean surface free from excess rust, soil and dirt. Apply lc 239. Allow to stand for 10-20 minutes, then flush off with water. Surface may Require repainting if necessary. Recommended to use lc 240 for neutralization And lc 252 for passivating the native surface on ferrous metals. Avoid contact With unwanted surfaces. Dosage For descaling purposes, dilute one part lc 239 with up to 20-100 parts of water Depending on the type and thickness of scale and method of application. Allow to Stand / circulate for several hours or as necessary. Flush with water until all the Scale is removed. Repeat if scale is still present, check ph during application for Control. Contact field chemist for further information. Do not use above 2% with Non-chemical pumps for circulation Handling & precaution Strongly acidic. Irritating to eyes and skin. After contact with skin wash Immediately with plenty of water. In case of eye contact irrigate thoroughly with Water for at least 15 minutes. Seek medical advice. Avoid direct contact with Glass, tiles and other such surfaces. Use adequate protective measures during Use. Packaging Available in pail of 20 lt. Can also be custom packaged.
Lc 240 is a highly alkaline concentrated product designed For neutralizing the metal surfaces that is susceptible to Corrosion. Lc 240 consists of a blend of soluble carbonate, Hydroxide and corrosion inhibitors. It is designed to control Corrosion and neutralize any acid left from “acid cleaning” Processes. It contains no chromate or heavy metals. It is Food grade, user & machine friendly and environmentally Safe. Neutralized mixtures can safely be disposed into Sewers. [ p – powder / l – liquid ] Application Can be added directly into the liquid volume to give a 1% to 5% solution or add till Ph value is between 6 - 8, which then may be used for neutralization & protection. For offline storing purposes a 0.5% solution may be quite effective. The surface to Be neutralized or get protection must receive a minimum of 5-10 minute contact Time. Dosage Dosage is calculated depending on the circulating or storing volume and the time Of contact. A diluted solution of 0.5% up to 5% is recommended. Use concentrated Solution for less contact time & higher initial conditions, where as a 0.5% solution May be used for storing. Ensure ph value between 6 – 8 before disposal. Handling & precaution This product is quite alkaline and should be handled with care to prevent personal Injury. Protective clothing and eye protection should be provided and worn. In case Of skin contact, immediately flush thoroughly with plenty of clean water. In case of Eye contact, flush with copious of amounts of water for 15 minutes and obtain Immediate medical attention. Packaging Available in pail of 20 lt. Can also be custom packaged.
Lc 214 is a special blend of penetrants, chlorinated Solvents, surfactants and emulsifiers designed to easily And quickly strip paint and varnish from metals, concrete, Brick, wood and most hard surfaces. The deep penetrating action of lc 214 soften though Paint and removes it without scraping. Lc 214 is homogeneous which adheres to vertical and Inverted surfaces and activate paint coating quickly. Application Brush, wipe or apply a heavy coat of lc 214 on the area to be Treated. For the reaction to be completed, allow lc 214 to Remain until old paint bubbles or wrinkles. Flush with water or Remove with scrapper. More than one application may be Required for areas of very heavy paint build-up. Dosage One ( 1 ) liter of lc 214 can be used over an area of 3 – 5 m2 . Handling & precaution Avoid contact with skin. In case of contact, wash affected areas With water. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 253 is an alkaline concentrated food grade product Designed for “passivating“ as well as neutralizing the Metal surfaces that is succeptable to corrosion. Lc 253 Is also an alkaline formulation of phosphate, polymeric Dispersants and corrosion inhibitors. It is designed to Control corrosion and neutralize any acidic left over from Acid cleaning processes. It contains no chromate or Heavy metals. Application Can be added directly into the raw water to give a 2% to 10% solution, Which then may be used for “passivating”, “neutralization” & “protection”. For offline storing purposes a 0.5% solution may be quite effective. The Surface to be passivated, neutralized or get protection must receive a Minimum of 15-30 minute contact time. Dosage Dosage is calculated depending on the circulating or storing volume and The time of contact. A diluted solution of 0.5% up to 10% is recommended. Use concentrated solution for less contact time & higher initial conditions, Where as a 0.5% solution may be used for storing. Handling & precaution This product is quite alkaline and should be handled with care to prevent Personal injury. Protective clothing and eye protection should be provided And worn. In case of skin contact, immediately flush thoroughly with plenty Of clean water. In case of eye contact, flush with copious of amounts of Water for 15 minutes and obtain immediate medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged
Lc 252 is designed to be used for “passivating” open & Closed loop systems to prevent corrosion. It is a liquid blend Of nitrite and other corrosion preventives which protects not Only steel surfaces but also copper and other metal as well. The high concentration makes it a cost effective nitrite based Passivating agent with the added advantage of being multimetal Compatibility and thus do not require separation of Non-ferrous parts from a system during passivation. Application Normally injected into the system that is previously filled with standard industrial Grade water and circulated continuously under required pressure for about 1-2 Hours with hourly monitoring of the nitrite concention. A higher temperature help to Accelerate the passivating process and therefore reduce operation time. An Appropriate temperature suitable to the system and available resources is choosen Between 35 – 950c Dosage Initial : 1 : 400 is suitable in most cases of passivation processes operating at Optimum temperature between 50 – 700c. Depending on the quality of water used Some adjustment in the amount may be required to maintain the ph of the solution. An increase in concentration of lc 252 is necessary in badly soiled systems. Additional amount of lc 252 may be required to be added during the circulation for The passivation process in order to maintain the required control parameters while Monitoring. Handling & precaution Avoid contact with acid, ammonium salts and activated carbon. No respiratory Protection. Is required, however, maintain adequate ventilation. Use rubber gloves And safety goggles when handling. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 271 is a strong solvent based degreaser and Decarboniser for the rapid removal of oil, grease, paint, Adhesives and waxes from metal components and Machinery. The mechanism of cleaning involves a quick Penetration of lc 271 to soften polymerized oils Associated with the carbon deposit. Then the deposit is Loosened and easily dispersed into the solvent. The Powerful solvents act quickly to break the bond between The deposits and the metal surface. Lc 271 is safe to Use on ferrous and non-ferrous metals, concrete and Ceramics. Application Ideal to use in metal dip tanks, spraying, wiping etc. Item to be descaled, Decarbonised or degreased should be immersed below the surface. Loose Soiling should be removed prior to immersion. After removal allow them to Drain for 10 minutes. Then, rinse with low pressure water. Keep container Covered for control evaporation. Handling & precaution Harmful if inhaled. May cause burns to eyes and skin. In case of contact With skin, wash immediately with plenty of water. Ensure adequate Ventilation at the point of use. If swallowed, seek medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 272 is a water based concentrated degreaser to Penetrate, emulsify and disperse oil, grease, dirt, soot, Grime and other types of soils from a variety of hard Surfaces. Safe for all types of metal surfaces. Specially designed for use in ovens, grills, chimneys, exitways, Smoke escapes, air vents & other such places Where thick deposits of oil/grease with soot / carbon is Common. Application Allow soaking time for effectiveness. Apply a thin layer by spraying or Brushing, then leave for soaking. Brush and scrap gently to remove any hard Soils if required then flush with water. Dosage Dilute with ratio of 1 : 5 with water depending on the dirt thickness. Use Concentrated product or lower dilution for tougher stains. Dilute upto 50 times For regular cleaning work. Handling & precaution Avoid spills on eyes. Should avoid unnecessary contact with skin. Can Irritate when exposed for a longer period. Harmful if swallowed. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Water treatment media.
