Lc 252 is designed to be used for “passivating” open &
Closed loop systems to prevent corrosion. It is a liquid blend
Of nitrite and other corrosion preventives which protects not
Only steel surfaces but also copper and other metal as well.
The high concentration makes it a cost effective nitrite based
Passivating agent with the added advantage of being multimetal
Compatibility and thus do not require separation of
Non-ferrous parts from a system during passivation.
Application
Normally injected into the system that is previously filled with standard industrial
Grade water and circulated continuously under required pressure for about 1-2
Hours with hourly monitoring of the nitrite concention. A higher temperature help to
Accelerate the passivating process and therefore reduce operation time. An
Appropriate temperature suitable to the system and available resources is choosen
Between 35 – 950c
Dosage
Initial : 1 : 400 is suitable in most cases of passivation processes operating at
Optimum temperature between 50 – 700c. Depending on the quality of water used
Some adjustment in the amount may be required to maintain the ph of the solution.
An increase in concentration of lc 252 is necessary in badly soiled systems.
Additional amount of lc 252 may be required to be added during the circulation for
The passivation process in order to maintain the required control parameters while
Monitoring.
Handling & precaution
Avoid contact with acid, ammonium salts and activated carbon. No respiratory
Protection. Is required, however, maintain adequate ventilation. Use rubber gloves
And safety goggles when handling.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 272 is a water based concentrated degreaser to Penetrate, emulsify and disperse oil, grease, dirt, soot, Grime and other types of soils from a variety of hard Surfaces. Safe for all types of metal surfaces. Specially designed for use in ovens, grills, chimneys, exitways, Smoke escapes, air vents & other such places Where thick deposits of oil/grease with soot / carbon is Common. Application Allow soaking time for effectiveness. Apply a thin layer by spraying or Brushing, then leave for soaking. Brush and scrap gently to remove any hard Soils if required then flush with water. Dosage Dilute with ratio of 1 : 5 with water depending on the dirt thickness. Use Concentrated product or lower dilution for tougher stains. Dilute upto 50 times For regular cleaning work. Handling & precaution Avoid spills on eyes. Should avoid unnecessary contact with skin. Can Irritate when exposed for a longer period. Harmful if swallowed. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 240 is a highly alkaline concentrated product designed For neutralizing the metal surfaces that is susceptible to Corrosion. Lc 240 consists of a blend of soluble carbonate, Hydroxide and corrosion inhibitors. It is designed to control Corrosion and neutralize any acid left from “acid cleaning” Processes. It contains no chromate or heavy metals. It is Food grade, user & machine friendly and environmentally Safe. Neutralized mixtures can safely be disposed into Sewers. [ p – powder / l – liquid ] Application Can be added directly into the liquid volume to give a 1% to 5% solution or add till Ph value is between 6 - 8, which then may be used for neutralization & protection. For offline storing purposes a 0.5% solution may be quite effective. The surface to Be neutralized or get protection must receive a minimum of 5-10 minute contact Time. Dosage Dosage is calculated depending on the circulating or storing volume and the time Of contact. A diluted solution of 0.5% up to 5% is recommended. Use concentrated Solution for less contact time & higher initial conditions, where as a 0.5% solution May be used for storing. Ensure ph value between 6 – 8 before disposal. Handling & precaution This product is quite alkaline and should be handled with care to prevent personal Injury. Protective clothing and eye protection should be provided and worn. In case Of skin contact, immediately flush thoroughly with plenty of clean water. In case of Eye contact, flush with copious of amounts of water for 15 minutes and obtain Immediate medical attention. Packaging Available in pail of 20 lt. Can also be custom packaged.
Lc 253 is an alkaline concentrated food grade product Designed for “passivating“ as well as neutralizing the Metal surfaces that is succeptable to corrosion. Lc 253 Is also an alkaline formulation of phosphate, polymeric Dispersants and corrosion inhibitors. It is designed to Control corrosion and neutralize any acidic left over from Acid cleaning processes. It contains no chromate or Heavy metals. Application Can be added directly into the raw water to give a 2% to 10% solution, Which then may be used for “passivating”, “neutralization” & “protection”. For offline storing purposes a 0.5% solution may be quite effective. The Surface to be passivated, neutralized or get protection must receive a Minimum of 15-30 minute contact time. Dosage Dosage is calculated depending on the circulating or storing volume and The time of contact. A diluted solution of 0.5% up to 10% is recommended. Use concentrated solution for less contact time & higher initial conditions, Where as a 0.5% solution may be used for storing. Handling & precaution This product is quite alkaline and should be handled with care to prevent Personal injury. Protective clothing and eye protection should be provided And worn. In case of skin contact, immediately flush thoroughly with plenty Of clean water. In case of eye contact, flush with copious of amounts of Water for 15 minutes and obtain immediate medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged
Supplier: Silica sols, Acid silica sol, Alkaline silica sol, Large-size silica sol, Quick drying silica sol complexing agent,Industrial Gases,Acetylene, Argon, CO2, Helium, Hydrogen, Liquid Ammonia, Nitric oxide, Nitrogen, Propane, Oxygen, Sulphurhexafluoride,OTHER PRODUCTS,Passivating agent, Sand removing Agent, Whitening Agent, Polyalumina and other chemical products
Usage: Used as a sequeatering,dispersing,deflocculating agent,and as a coating agent to form a thin passivating. Film that protects metals from corrosion; Industrial water treatment; and can be used in continuously recycled industrial water as a softener; SHMP is used in the textile industry for industrial cleaning and as dispersion in pigmenting and dyeing operations. It is also used in oil well drilling. 25KG/50Lb net Multi-wall paper bag.
Pickling and passivation chemicals
Supplier: Pickling and passivation chemicals for stainless steel, aluminum, brass, titanium, electro polishing chemicals, rust removing chemicals, desclaing agents
Supplier: Industrial lubricant, cutting fluid, tapping oil, grinding oil, wire drawing oil, deep drawing oil, concrete mold release agent, aluminum die casting mold release agent, metal surface treatment (degreaser, rust remover, anti rust oil, blackening agent), pickling and passivation paste, thickener, antistatic agent, emulsifier agent, uv absorber, hals, light stabilizer, anti oxidant, welding splash agent, antifreeze defoaming agent, corrosion inhibitor, colorant.
Supplier: Paint, metallic preparations product, degreasing agent, passivator, floor paint, polyethylene wax(pe wax), nickel nitrate, cobalt acetate, cobalt sulphate, nickel sulphate, mkp, zinc nitrate, manganous nitrate, calcium nitrate, titanlyl sulfate, sodium molybdate, ammonium molybdate, tribasic lead sulfate, phosphoric acid, cupric nitrate