Description The Innov-X Omega X-Ray fluorescence spectrometer is a handheld XRF analyser. With its ultra rugged design, diverse field analysis is possible in any conditions. The XRF delivers fast and precise identification and analysis of elements from phosphorus to uranium (P to U). Advantages of Field Portable XRF. In the past, studies relied exclusively on expensive and time consuming analysis based on samples that hopefully characterised the site. The portable XRF has revolutionised environmental investigations by allowing you on-the-spot elemental analysis, in real time. Measure the composition of soils, debris, run-off streams, dust wipes, coatings, corings, paints, plastic and wood instantly,saving you time and money. From phosphorus to lead, from low ppm to 100% - in soils, solids, liquids, powders, cores, fragments, filters & films, slurries and more. One simple test can analyse up to 25 separate elements in seconds, including priority pollutants. Determine zonal and contamination patterns; track pollutant migration caused by extreme weather; perform real-time surveys to delineate and define metals present. In-situ soil analysis for rapid, comprehensive site investigations: Delineate metals present and contamination patterns Measure high volume field tests to minimise laboratory analytical costs Test soil directly through plastic corings or bagged samples Establish contamination boundaries and depth profiles for remediation and disposal Collection of samples to produce rock-solid analytical data at the site: XRF is non-destructive submit same sample for laboratory confirmation Ensure validation requirements/targets are met on-site in real time Prepared soil sample testing assures the maximum possible accuracy Ultimate XRF Performance with Silicon Drift Detector (SDD) Technology The Innov-X Omega Xpress and Omega Xpress Vacuum Alloy Analyzers utilize the latest in detector technology - an innovative, large area Silicon Drift Detector (SDD), commonly used and tested extensively in high end, laboratory based instrumentation. In comparison to a traditional Si PiN Diode detector, the SDD provides: 10x improvement in signal to background ratio Marked resolution improvement, from 195eV to 165eV The capacity to handle 10x more counts Key benefts to the user: >3x improvement in reading speed. Light element (Mg, Al, Si, P, S) analysis in air 3x better limits of detection for sensitive tramp elements
Benefits Environmental studies can now save time and money with real-time, on-the spot elemental analysis - from Magnesium to Uranium, From PPM to 100 % - in solids, liquids, powders, cores, fragments, filters and films, slurries and more. Portable XRF provides cost-effective, timely analysis. Innov-X combined an x-ray tube source, multiple beam filtering and the HP PDA to deliver superior limits of detection, speed, precision and upgrade capability. Features Superior performance of Cr and other metals. Light element Analysis Program (LEAP) analyzes P, S, Cl, K and Ca Utilizes advanced and universal XRF data modeling: Compton Normalization: "Internal Standard" provides for quantitative analysis without site-specific calibrations Fundamental Parameters: Standardless, ideal for samples with high and low concentration of several elements Empirical Calibrations: "Calibration Curves" allows user-generated calibration curves Add new elements and calibrations easily. Innov-X analyzers will meet your requirements today and in the future View spectra on screen Compare spectra for comparative analysis and display results versus standards Stored tests can be re-run with new parameters or models Data security: stores in binary format for data intel
BRUKER S1 TITAN HANDHELD XRF SPECTROMETER The S1 TITAN is among the lightest (1.5 kg, including battery) tube-based handheld XRF analyzers on the market today. Fast analysis speed and exceptional accuracy are two key attributes that help define the S1 TITAN. Other innovative features include an integrated touch-screen color display, 50 kV X-ray tube, SMART GradeTM timing, SharpBeamTM optimized X-ray geometry, Silicon Drift Detector (SDD), and an extremely tough housing that is sealed against humid and dusty environments. Contact our sales team today to learn more about the innovative S1 TITAN! The S1 TITAN series is available in four (4) configurations: models 800, 600, 500 and 200. All models use Brukerâ??s SharpBeamTM technology. The S1 TITAN 800 and 600 use a FAST SDD detector to give you incredibly fast analysis times. The S1 TITAN 500 is configured with a fast, accurate, and affordable standard SDD detector. The S1 TITAN 200 is configured with an economical Si-PIN detector. In addition, the S1 TITAN can be configured with calibrations that are optimized for a variety of sample materials- including a wide range of alloys, various mining & environmental samples, as well as restricted materials. SharpBeamTM technology The S1 TITANs patent pending SharpBeamTM technology optimizes the detector and tube geometry. The optimized geometry has many desirable effects, including: Reduces power requirements Reduces weight Improves measurement precision Improved detection limits Increases battery life S1 TITAN Technical Details NEW! pXRF Specification comparison (PDF) Calibration range (depending on specific calibration): S1 TITAN 800: 37 elements, including light elements Mg, Al & Si S1 TITAN 600: 37 elements, including light elements Mg, Al & Si S1 TITAN 500: 32 elements S1 TITAN 200: 32 elements Weight: 1.5 kg (3.3 lbs) with battery Size: 25 cm x 28 cm x 9 cm (10 in x 11 in x 3.7 in) Sample temperature: S1 TITAN 800: Default to 150 C with Ultralen window. Up to 500C with Kapto window and hot surface adapter. S1 TITAN 600: Default to 150 C with Ultralene window. Up to 500C with Kapton window and hot surface adapter. S1 TITAN 500: up to 500C S1 TITAN 200: up to 500C TITAN Detector ShieldTM: Included on all S1 TITAN models Integrated camera: S1 TITAN 800: Included S1 TITAN 600: Optional S1 TITAN 500: Not available S1 TITAN 200: Not available Detector: S1 TITAN 800: FAST SDD�® S1 TITAN 600: FAST SDD�® S1 TITAN 500: Standard SDD S1 TITAN 200: Si-PIN Collimator options: S1 TITAN 800: 5mm standard. Optional 8mm or 3mm S1 TITAN 600: 5mm S1 TITAN 500: 5mm S1 TITAN 200: 5mm X-ray tube: Rh target; max voltage 50 kV Filter changer: S1 TITAN 800: Five position motorized filter changer S1 TITAN 600: Five position motorized filter changer S1 TITAN 500: Fixed filter S1 TITAN 200: Fixed filter
Features: Genuine Zenoah G320 32cc engine Innovative Bind-N-Driveâ?¢ Spektrum SR6000T telemetry-ready receiver Improved bar style steering rack with adjustable Ackermann Improved center differential orientation Improved drive line angle Heavy-duty brakes Innovative clutch mount with gear mesh brace Tough throttle servo brace Extra-large 800cc capacity fuel tank Specifications: Type: 1/5th Scale 4wd Short Course Truck Scale: 1/5 Length: 38.0 In (965.2mm) Width: 20.75 in (527mm) Height: 12.25 in (311.1 mm) Ground Clearance: 2.0 in (50.8mm) Wheelbase: 24.0 in (609.6mm) Weight: 35.4 lbs (16.06 kg) Chassis: 5mm Plate, 6061-T6 Aluminum Suspension: 4-Wheel Independent Drivetrain: 4WD Tire Type: Firm, Square Pin Motor or Engine: 32cc Zenoah G320 Speed Control: SR6000T Telemetry Receiver Radio: DSMR Compatible (Not Included) Servos: S900S / S901T Batteries: 2S Receiver LiPo (Not Included) Gear Pitch: 1.5 MOD Wheel Size: 2.8in (71.1mm) wide Kit/RTR: BND Shock Type: Oil-Filled, Coil-Over Springs Body: 4 piece, Polycarbonate, Short Course with Decals Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing Fuel Tank Capacity: 800cc (27.1 oz) Includes: (1) Grey, Orange & White Losi 5IVE-T® 2.0 BND 4WD SCT (1) Spektrum® SR6000T 6-Channel DSMR Slim Receiver with Telemetry (1) Zenoahâ?¢ 32cc Gasoline Pull-Start Engine (1) S900S 1/5 Scale Metal Gear Steering Servo (1) S901T 1/5 Scale Metal Gear Throttle Servo (1) Wheel Wrench (1) Rod End/Shock End tool (1) Multi Wrench (1) Spark Plug Wrench (1) Bind Plug (1) Exhaust Gasket 2.0mm, 2.5mm, 3.0mm, 4.0mm Allen Wrenches Product Manual Needed To Complete: 2S Lipo Receiver Battery and Appropriate Charger DSMR Compatible Transmitter 87-92 Octane Gasoline 2-Cycle Oil Ratio Rite Measuring Cup
1,295 ft.-lbs. max. loosening torque 200950 ft.-lbs. working torque 9,000 RPM free speed 1,400 BPM Durable twin hammer mechanism with super clutch Best suited for all-around automotive maintenance Patented AirCat® Quiet Technology (85dB) Easy Flip lever controls forward/reverse Ergonomic grip handle reduces operator fatigue Includes FREE AirCat tool bag Ship Weight 5.12 lbs Drive (in.) 1/2 Speed - No Load (RPM) 9,000 Average Air Consumption (CFM) 8 CFM at Load 4.3 Operating PSI 90120 Working Torque (ft.-lb.) 200950 Forward Torque (ft.-lbs.) 200950 Max. Torque (ft.-lbs.) 1,295 Max. Reverse Torque (ft.-lbs.) 1,295 Impacts Per Minute (IPM) 1,400 Hammer Mechanism Twin Variable Speed Yes Reversible Yes Standard Bolt Capacity (in.) 9/16 Inlet Size (in.) 1/4 Min. Hose Size (in.) 1/4 Noise Level (dB) 85 Tool Weight (lbs.) 4.5 Tool Length (in.) 7.5 Case Included Contractor bag
Powerful 11 Amp, 11,000 RPM motor provides maximum performance and reliability Slim paddle design for increased control and reduced user fatigue Tool-free accessory change allows user to easily change all accessories without a wrench Tool-free adjustable guard provides quick installations and adjustments Advanced airflow system maximizes airflow and reduces debris ingress, improving motor life and performance Key Specs Ship Weight 5.5 lbs Wheel Diameter (in.) 4 1/2 Speed (RPM) 11,000 Spindle Size (in.) 5/8 Thread Size (TPI) 11 Spindle Lock Yes Volts 120 Amps 11 Cord Length (ft.) 8 Switch Type Locking paddle switch Trigger Lock Yes Variable Speed No Side Handle Yes Wheel Included Yes Dimensions L x W x H (in.) 13 4/5 x 4 1/5 x 2 7/10 Tool Weight (lbs.) 5.5 Storage Type Contractor bag
Counter balance mechanism reduces vibration for more control and less fatigue All metal gearing and gearcase provide maximum durability Lever action Quik-Lokâ?¢ blade clamp provides fast and easy blade changes Redlink Intelligence advanced overload system protects the tool against rough use and provides maximum life 03000 SPM 1 1/8in. stroke length Includes M18 Redlithium XC 3.0Ah battery pack, M18 & M12 multi-voltage charger, blade and carrying case Key Specs Ship Weight 16.95 lbs Cordless Yes Volts 18 Battery Type Lithium-ion Batteries (qty.) 1 Stroke Length (in.) 1 1/8 Strokes Per Minute (SPM) 03,000 Blade Included Yes Dimensions L x W x H (in.) 19 x 8 1/8 x 3 1/8 Tool Weight (lbs.) 8.9 Storage Type Plastic case
Performance: Ten second Cat 6A test time contributes to the fastest way to gain certification Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting Manage up to 12,000 test results with full graphics Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters 1 billion links reported on LinkWare management software Standards: Compliant with proposed ISO (IEC WG9 Standard IEC61935-1) Level V accuracy requirements to 1000 MHz Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) â?? IEC61935-1 & 11801-1-4, IEEE 802.3af, IEEE 802.3at, ANSI/TIA/EIA-568-C.2 Next generation balance drafts â?? IEEE 802.3, TIA TR42.7
Function: Battery charge way Stainless body and luxurious appearance Extended working time by using lithium-ion battery Prevent water flow back to machine by forcing pump Minimize chemical in tank by forcing pump Control chemical volume(Pump motor output control)
INCLUDES: Dual Levered Mount User Manual Quick Reference Guide 3 CR123 Batteries Trijicon Logo Sticker Shuttered Eye Guard Download Card & Cable Warranty Card LENSPEN Hard Case
Epoch 600 Flaw Detector
Specifications PRF 10 Hz to 2000 Hz in 10 Hz increments Pulse Width Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology Gain 0 to 110 dB Receiver Bandwidth 0.2 MHz to 26.5 MHz at â??3 dB System Linearity Horizontal: �± 0.5% FSW Resolution 0.25% FSH, amplifier accuracy �± 1dB Reject 0 to 80% FSH with Visual Warning Amplitude Measurement 0 to 110% full screen height with 0.25% resolution Automated Calibration Velocity, Zero Offset Straight Beam (First Backwall or Echo-to-Echo) Angle Beam (Soundpath or Depth) Test Modes Pulse Echo, Dual, or Through Transmission Range 3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) at 5,900 m/s (0.2320 in./�µs) Velocity 635 m/s to 15240 m/s (0.0250 in./�µs to 0.6000 in./�µs) Zero Offset 0 to 750 �µs Refracted Angle 0�° to 90�° in 0.1�° increments Measurement Gates 2 fully independent gates for amplitude and TOF measurements Measurements Gate (1, 2) Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude Echo-to-Echo Standard Gate 2-Gate 1, Optional IF Gate Tracking Other measurements Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values DAC/TCG Standard DAC points Up to 50 points, 110 dB dynamic range Special DAC modes Custom DAC (up to 6 curves), 20-80% View Curved surface correction Standard OD or Bar correction for Angle Beam measurements
Includes: - Olympus NORTEC 600D Dual Frequency - Calibration certificate - Charger/adaptor - AC power cord - Getting Started leaflet - NORTEC 600D Users Manual and PC interface program on CD-ROM - Universal PowerLink eddy current probe cable - MicroSD memory card, 2 GB (1 internal, 1 external) - USB 2.0 (mini-AB) to PC cable - 67 watt-hour battery for 600 Series products, 10.8 V, 6.2 Ah, 67 Wh - AA battery holder for emergency use - Factory-installed hand strap on left side of NORTEC 600D instrument - Instrument transport case - Olympus NEC-8196L Weld Inspection Kit
The RF/LTE Analyzer GenComm (JDSU) GC747A is an ideal tool for installation and maintenance of cellular base stations. The GC747A combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements, covering all the measurements required for test, acceptance and troubleshooting the physical layer of cellular networks. The GC747A is equipped with one-button standards based measurements for wireless signals and offers the full scope of common performance measurements of BTS antenna systems.
The RF/LTE Analyzer GenComm (JDSU) GC747A is an ideal tool for installation and maintenance of cellular base stations. The GC747A combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements, covering all the measurements required for test, acceptance and troubleshooting the physical layer of cellular networks. The GC747A is equipped with one-button standards-based measurements for wireless signals and offers the full scope of common performance measurements of BTS antenna systems.
Package included: Carrying case Hand strap Shoulder strap Charged battery Wall charger with analyzer The X-MET8000 uses novel BOOST technology, which means the system has detection limits that are low enough for the fast and accurate measurement of critical elements (e.g., US EPA Method 6200 RCRA and priority elements).The geodata provided uses Trimble receivers to provide accurate localized data.
Features for the Industrial Air 846212075968 Air Compressor Air end is mounted on sump for fewer connection points and oil leak paths. Left or right-side tank air outlet. Fan mounted on the side of cabinet for easier top access for maintenance. User-friendly digital control panel. Oil sight glass integrated in front panel of cabinet for easy oil level inspection. All electrical components are UL approved. Specifications Acme Tools Brand Name: INDUSTRIAL AIR Acme Tools Part Number: IARS-10 Air Compressor Pump Design: Oil Lubricated Air Delivery (scfm) @ 100PSI: 42.2 Amperage (A): 30 Assembled Weight (lbs): 350 Compressor Design: Horizontal (Stationary) Cordless / Corded: Corded Decibel Rating (dB): 69 ETL Listed: No Global Trade Item Number (GTIN): 00846212075968 Height (in): 26 Horsepower (hp): 10 Internal Supplier Part #: IARS-10 Internet Product Code (IPC): 1B7722D3F02 Length (in): 38 Maximum Pressure Rating (psi): 150 Motor Type: Three-phase motor(208/230/460V) Nozzle Fitting Size: 1/2 In. Package Contents: Air compressor Package Weight: 350 Package Weight (lbs): 350 Tank Configuration: Single Tank Pressure Gauge: Yes UL Listed: Yes UPC: 00846212075968 Voltage Rating: 208/230/460 Weight (lbs): 350 Wheeled: No Width (in): 25
Features for the Husqvarna CRT36-5A Maximum control and nearly effortless operation Patented dynamically balanced trowels (when blades are turning) gives you the same performance at all speeds with all types of blades including float pans. Perfect results in all edging areas and in small areas. Versions for every job and preference Different engine options provide versatility to meet individual preferences and job site conditions. Variable speeds Low speeds for floating, high speeds for burnishing. For wider speed range choose our models equipped with CVT clutch. Optimal concrete burnishing Possible to adjust blade pitch up to 30�°. Gyroscopic stop for safety Gyroscopic safety sensor and engine speed limiter provide operator protection by stopping handle rotation within three-quarters turn. Ergonomic working position Height adjustable handle with Pro-Shiftâ?¢ System enables continuous adjustment of the floating blade pitch as well as individual height adjustment.
Features for the Brave BRPBC26HE Brushcutter Features Heavy-duty construction. Fully enclosed deck to minimize discharge. 26" cutting width. Two blades, sharpened on both sides and edge. Hydrostatic transaxle. Large pneumatic tires for tough terrain. Handle guards for operator safety. Specifications Engine: Honda GX390 Start: Electric with Recoil Backup Engine Displacement: 389 cc Drive: Hydrostatic (1 forward, 1 Reverse) Maximum Cut Width: 26" Cutting Capacity: Saplings up to 3" Diameter Spindle: 1" Spindle Bearings: Sealed, Industrial Grade Tires: 16/6.5 x 8 Pneumatic Bar lug
11.5 HP 344cc Briggs & Stratton EPA/CARB Approved Engine Electric start 44 inch cutting width Chain debris guards front and back Adjustable cutting height (4â??, 5â??, 6.25â?? and 7.5â??) Breakaway blades Push and pull bars Cutting capacity of 4-8 feet grass height Cuts up to 2 inch thick saplings 18 inch diameter all-terrain wheels Key switch remote controls
