Lc 240 is a highly alkaline concentrated product designed For neutralizing the metal surfaces that is susceptible to Corrosion. Lc 240 consists of a blend of soluble carbonate, Hydroxide and corrosion inhibitors. It is designed to control Corrosion and neutralize any acid left from “acid cleaning” Processes. It contains no chromate or heavy metals. It is Food grade, user & machine friendly and environmentally Safe. Neutralized mixtures can safely be disposed into Sewers. [ p – powder / l – liquid ] Application Can be added directly into the liquid volume to give a 1% to 5% solution or add till Ph value is between 6 - 8, which then may be used for neutralization & protection. For offline storing purposes a 0.5% solution may be quite effective. The surface to Be neutralized or get protection must receive a minimum of 5-10 minute contact Time. Dosage Dosage is calculated depending on the circulating or storing volume and the time Of contact. A diluted solution of 0.5% up to 5% is recommended. Use concentrated Solution for less contact time & higher initial conditions, where as a 0.5% solution May be used for storing. Ensure ph value between 6 – 8 before disposal. Handling & precaution This product is quite alkaline and should be handled with care to prevent personal Injury. Protective clothing and eye protection should be provided and worn. In case Of skin contact, immediately flush thoroughly with plenty of clean water. In case of Eye contact, flush with copious of amounts of water for 15 minutes and obtain Immediate medical attention. Packaging Available in pail of 20 lt. Can also be custom packaged.
Lc 214 is a special blend of penetrants, chlorinated Solvents, surfactants and emulsifiers designed to easily And quickly strip paint and varnish from metals, concrete, Brick, wood and most hard surfaces. The deep penetrating action of lc 214 soften though Paint and removes it without scraping. Lc 214 is homogeneous which adheres to vertical and Inverted surfaces and activate paint coating quickly. Application Brush, wipe or apply a heavy coat of lc 214 on the area to be Treated. For the reaction to be completed, allow lc 214 to Remain until old paint bubbles or wrinkles. Flush with water or Remove with scrapper. More than one application may be Required for areas of very heavy paint build-up. Dosage One ( 1 ) liter of lc 214 can be used over an area of 3 – 5 m2 . Handling & precaution Avoid contact with skin. In case of contact, wash affected areas With water. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 253 is an alkaline concentrated food grade product Designed for “passivating“ as well as neutralizing the Metal surfaces that is succeptable to corrosion. Lc 253 Is also an alkaline formulation of phosphate, polymeric Dispersants and corrosion inhibitors. It is designed to Control corrosion and neutralize any acidic left over from Acid cleaning processes. It contains no chromate or Heavy metals. Application Can be added directly into the raw water to give a 2% to 10% solution, Which then may be used for “passivating”, “neutralization” & “protection”. For offline storing purposes a 0.5% solution may be quite effective. The Surface to be passivated, neutralized or get protection must receive a Minimum of 15-30 minute contact time. Dosage Dosage is calculated depending on the circulating or storing volume and The time of contact. A diluted solution of 0.5% up to 10% is recommended. Use concentrated solution for less contact time & higher initial conditions, Where as a 0.5% solution may be used for storing. Handling & precaution This product is quite alkaline and should be handled with care to prevent Personal injury. Protective clothing and eye protection should be provided And worn. In case of skin contact, immediately flush thoroughly with plenty Of clean water. In case of eye contact, flush with copious of amounts of Water for 15 minutes and obtain immediate medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged
Lc 252 is designed to be used for “passivating” open & Closed loop systems to prevent corrosion. It is a liquid blend Of nitrite and other corrosion preventives which protects not Only steel surfaces but also copper and other metal as well. The high concentration makes it a cost effective nitrite based Passivating agent with the added advantage of being multimetal Compatibility and thus do not require separation of Non-ferrous parts from a system during passivation. Application Normally injected into the system that is previously filled with standard industrial Grade water and circulated continuously under required pressure for about 1-2 Hours with hourly monitoring of the nitrite concention. A higher temperature help to Accelerate the passivating process and therefore reduce operation time. An Appropriate temperature suitable to the system and available resources is choosen Between 35 – 950c Dosage Initial : 1 : 400 is suitable in most cases of passivation processes operating at Optimum temperature between 50 – 700c. Depending on the quality of water used Some adjustment in the amount may be required to maintain the ph of the solution. An increase in concentration of lc 252 is necessary in badly soiled systems. Additional amount of lc 252 may be required to be added during the circulation for The passivation process in order to maintain the required control parameters while Monitoring. Handling & precaution Avoid contact with acid, ammonium salts and activated carbon. No respiratory Protection. Is required, however, maintain adequate ventilation. Use rubber gloves And safety goggles when handling. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 271 is a strong solvent based degreaser and Decarboniser for the rapid removal of oil, grease, paint, Adhesives and waxes from metal components and Machinery. The mechanism of cleaning involves a quick Penetration of lc 271 to soften polymerized oils Associated with the carbon deposit. Then the deposit is Loosened and easily dispersed into the solvent. The Powerful solvents act quickly to break the bond between The deposits and the metal surface. Lc 271 is safe to Use on ferrous and non-ferrous metals, concrete and Ceramics. Application Ideal to use in metal dip tanks, spraying, wiping etc. Item to be descaled, Decarbonised or degreased should be immersed below the surface. Loose Soiling should be removed prior to immersion. After removal allow them to Drain for 10 minutes. Then, rinse with low pressure water. Keep container Covered for control evaporation. Handling & precaution Harmful if inhaled. May cause burns to eyes and skin. In case of contact With skin, wash immediately with plenty of water. Ensure adequate Ventilation at the point of use. If swallowed, seek medical attention. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 272 is a water based concentrated degreaser to Penetrate, emulsify and disperse oil, grease, dirt, soot, Grime and other types of soils from a variety of hard Surfaces. Safe for all types of metal surfaces. Specially designed for use in ovens, grills, chimneys, exitways, Smoke escapes, air vents & other such places Where thick deposits of oil/grease with soot / carbon is Common. Application Allow soaking time for effectiveness. Apply a thin layer by spraying or Brushing, then leave for soaking. Brush and scrap gently to remove any hard Soils if required then flush with water. Dosage Dilute with ratio of 1 : 5 with water depending on the dirt thickness. Use Concentrated product or lower dilution for tougher stains. Dilute upto 50 times For regular cleaning work. Handling & precaution Avoid spills on eyes. Should avoid unnecessary contact with skin. Can Irritate when exposed for a longer period. Harmful if swallowed. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Resin and other chemicals.
Chemicals, briquette chacoal.
Chemicals, petrochemicals, catalyst.Distributor
Chemical And Bricket.
Woodchips, wood pellets, K2O from EFB ash and other biomass products..Producer & exporter, FOB
Polycarboxylateether (pce), sulphonatedacetone formaldehyde condensate (saf), diethanolisopropanolamine (deipa), petrochemical.Distribution, manufacturing and logistics
Mn metal powder, mno2 99%, mnco3 99%, mnso4 99%.
Industrial chemicals, oleochemicals, edible oils & fats, rubber chemicals, food chemicals.Export, import, trading
Liquid sucrose, briquettes.
Nickel Hydroxide And Nickel Sulfate.
Poly Aluminium Chloride Liquid , chemicals , cleaning products, disinfectant products , etc.
Release agent for tire, additive tire, antitack powder, antitack liquid, anti foam for paper and paint.
Lubricants, oil, chemical.
Agricultural And Craft..
