HMS 1&2 Scrap, Used Rail Scrap /Used Rails R50- R65 for sale HMS 1 / 2 STEEL METAL SCRAP (BULK QUANTITIES) Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap we are offering quality range of HMS Scrap (1 & 2) to interested buyers.Our HMS range are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each all product before release by various industrial parameters by our quality analyst. Giving at moderate Prices and international Export. Contact us for offers.
We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Copper SCRAP,HMS,Used Rail,Metal,Moto Scrap,Vessel,Tyre Wire Scrap,Aluminium Scrap We are yard owners and end sellers of metals and scrap metals we offer: Copper cathodes and copper scraps Aluminium Ingots and aluminium scraps lead Ingots and scraps HMS 1/2 scrap, Moto scraps Used rails, battery scrap in large quantity. we sell at affordable prices
Hello, Vessel available for Scrap. Japanese Built Gross Tonnage almost, 1700 and asking Price approximately 4 Lakh USD Contact for More Details.
Stainless steel scrap grade 202, 410, 304, etc
Heavy melting steel (HMS) or heavy melting scrap is a designation for recyclable steel and wrought iron. It is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. The Institute of Scrap Recycling Industries breaks up the categories further:[1] ISRI 200 (HMS 1): Wrought iron or steel scrap 1â??4 inch (6.35 mm) and larger in thickness. All pieces must be smaller than 60 in Ã? 24 in (1,524 mm Ã? 610 mm) ISRI 201 (HMS 1): Same as ISRI 200 except pieces must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm). ISRI 202 (HMS 1): Same as ISRI 200 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm). ISRI 203 (HMS 2): Wrought iron or steel scrap, black and galvanized, 1â??8 inch (3.175 mm) and larger in thickness. ISRI 204 (HMS 2): Same as ISRI 203 except pieces [1]must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm). ISRI 205 (HMS 2): Same as ISRI 204 except it may contain automotive scrap except for thin gauge material. ISRI 206 (HMS 2): Same as ISRI 205 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm). HMS 1 and 2 are widely traded, particularly in the western hemisphere. Both HMS 1 and 2 comprise obsolete scrap only - iron and steel recovered from items demolished or dismantled at the end of their life. Because both grades guarantee a minimum piece thickness â?? at least 1â??4 inch (6.35 mm) for HMS 1, and 1â??8 inch (3.175 mm) for HMS 2 â?? consignments have a high density. Both also have defined maximum dimensions (usually 60 in Ã? 24 in or 1,524 mm Ã? 610 mm), and should be prepared to facilitate handling and charging to a furnace. This density, sizing and preparation makes for efficient furnace operation by minimising the time to charge enough scrap for a full melt. In contrast, thin mixed scrap greatly increases charging time, cutting furnace productivity. Variations on maximum piece size are covered by ISRI (North Americaâ??s Institute of Scrap Recycling Industries) codes. HMS is usually traded as a blend of 1 and 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Other major heavy scrap grades include Japanâ??s H2 and A3 from the CIS.[2]
Score
Zinc Scrap
We deal in all Grades of Titanium Scrap. *Price may vary as per the current market conditions.
An adequate source of genuine atlas copco compressor spare parts & accessories
An adequate source of ingersollrand compressor spare parts, filter, Seperator & ultra coolant oil
20% Zinc, 6% Copper.Monthly 50 metric tons available. Lab report attached. SGS inspection permitted at the expense of the buyer during the loading of the shipment.
Specifications Of Railways R50 / R65 : Second Quality Railway Used Rail Steel No . 1. Standard Section Tee Rails , Original Weight 50 Pounds Per Yard , Over Heavier , Rails . Steel No . 2. Cropped Rail Ends , Standard Section , Original Weight 50 Pound Per Yard And Over 12.50 Meters Long . Ya ) B ) ( 28c ) Rail - Steel No.2 T - Rail Ends Standard Section - Original Weight 50 Pounds Per Yard And Over 12.50 Pounds Per Yard And Over - Rail , Steel No.3 , Standard Section Fee , Gender , And / Or Guard Rails , Free From Frog And Switch Rails Not Cut Apart , And Contain No Manganese , Cast , Welds Or Attachment Any Kind Except Angle Bars Also Rails , Not Found And Without Radiation And Explosive Substance ... ( 1.00 - 1.50-2.00-2.50-2.80 Meter ) ( R 50 / R65 ) Chemical Composition Shall Be According To R65 Gost 8165.75 Weight 64.72 Kg / Meter C = 0.54 % _0.82 % Si = 0.18_0.40 % Mn = 0.60 1.05 % S = 0.04 % _max P = 0.035 % As - 0.01 Mix Of Mass Share. R50 Gost 7173.75 Weight 51.67 Kg / Meter C = 0.54 % 0.82 % Si = 0.18 0.40 % Mn = 0.60 1.05 % S = 0.04 % Max P = 0.035 % As -0.01 Mix Of Mass Share
Copper Mill berry Scrap 4900 usd /MTN Origin : USD MOQ : 12000 MTN . Yearly contract Transferable LC Non transferable LC price will be based on the stock and location. No samples . No photo videos without LC , we need real buyers . come with only with Buyers loi on buyers letter head . we dont want to work with time wasting elements.
Minimum : 1.000.000MT / month on yearly contract 280 usd We are tie up with worlds biggest rail manufacturing company.
Specifications: Clean Grade A (99.9% to 99.99%) scrap copper wire. The copper wire consists of clean (free of any insulation), untinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire, and excessive oils minimum. Waste identification code B1010 - Basel Convention, Annex IX Chemical analysis: Copper content of 99.9% - 99.99% remelt recovery rate. Technical Specifications: Quality Cooper (Cu) 99.97% purity, minimum B (%) < 0.05 Tensile Strenght > 205 RM (N/mm2) Yield Strenght < 10% Cleanliness (g/m2) < 0.025 Wire diameter 0.15mm; 0.25mm; 0.50mm. or more, < 5mm. Excluding Ag & Oxygen Chemical Composition: Element: (%) Copper 99.90% min Lead: 0.005% Max Bismuth: 0.03% Max Carbon: 0.03% Max Iron: 0.005% Max Zinc: 0.003% Cobalt:
HMS 1&2 is produced from various sources and clean and clear material Product origin : Multiple Origin Key Specifications/Special Features : HMS 1&2 scrap is available as per buyers requirement with multiple options. supply available to any part of the world. Material is free from rediation and clean, clear and acceptable anywhere. Minimum Order Size and Packgaing details MOQ: 25 Ton Packaging: Bulk
Clean electric motor scrap available at fair rates to your port.
Fridge/AC Compressor Scraps We sell Fridge /AC Compressor Scraps at a very competitive market price. Please let us know if you have a target price. Please kindly find some specification below. 1) Quantity: between 900 MT up to 1500 MT per month. 2) Packing: As buyer requires (20ft container is up to 3000 pcs to 3450 pcs of compressors in the container. 25 MT or 26 MT) 3) Delivery: Immediately and prompt. Origin: Thailand Delivery Time: 7-21 days depending on delivery port. By truck for Asian countries and sea freight for rest of the world . Detailed Specifications : Compressor Brands : Necchi, Danfoss, Aspera, Ireland, Embraco Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity : 90-190 w displ Size : 5.99 -12.53 cm3 Purity : 99.98% copper inside with connection box We shall be looking forward to welcome your inquiries.
Ac And Refrigerator Compressors Scraps ALUMINUM WHEEL SCRAP COPPER SCRAP 1.Competitive price 2.Excellent Quality 99.7% - 99.9% 2.Prompt Shipment 3.Long-term and stable supply
