We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium
iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth
alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal
products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc
ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap,
copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules,
Rubber Scrap, Paper Scrap, etc.
Chemical Composition:
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS 1 / 2 STEEL METAL SCRAP FOR SELL:
Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS 1 / 2 STEEL METAL SCRAP FOR SELL:
Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap
Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate.
We have Used Rails | HMS 1:2
ISRI CODE R50-R65
Composition
C - 0.54-0.82%,
SI - 0.18-0.40%,
MN - 0.60-1.05%,
S - 0.04% maximum
P - 0.035% maximum
AS: - 0.01% Maximum of Mass Share
HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40).
Copper SCRAP,HMS,Used Rail,Metal,Moto Scrap,Vessel,Tyre Wire Scrap,Aluminium Scrap
We are yard owners and end sellers of metals and scrap metals
we offer:
Copper cathodes and copper scraps
Aluminium Ingots and aluminium scraps
lead Ingots and scraps
HMS 1/2 scrap,
Moto scraps
Used rails,
battery scrap in large quantity.
we sell at affordable prices
Supplier: HMS 1&2 80/20 scrap
Buyer: Lead acid battery scrap
Hms 1& 2 Hms 1&2 (80:20) can be used for manufacturing rods and ankels and any heavy metal usage... Comes by ship and one shipment carries 30, 000tonnes
Iron scrap hms 1&2 (80:20) Subject: scrap hms 1&2 (80:20) Whereas: xxxx co. Ltd. With full corporate authority and responsibility hereby makes and confirms that it is ready, willing, and able to purchase 2500 mt +/- 5% (two thousand five hundred metric tons) (plus or minus five percent) of product under the terms and conditions agreed and contained in this contract; Whereas: maroon impex, with full corporate authority and responsibility hereby certifies, represents, and warrants that it has the commodity and is willing to sell and can fulfill the commodity specifications, quality, quantity, and timely deliveries agreed in this contract; and the product will be cut to one and a half (1.5) meter length as requested; and Whereas: upon consideration of the mutual agreements, promises, benefits, terms, and valuable consideration between and in the benefit of maroon impex and maroon impex have determined to enter into this sales and purchase contract in accordance with the following terms and conditions set out herein; Standard lot size
We can provide HMS 1 & 2 (80/20) scrap metal from Europe. Payment terms - LC at sight after inspection Minimum quantity - 50 MT Maximum quantity - 200 MT If interested please send us a LOI stating your requirement. Pics will be provided. Only serious buyers please contact.
1 IRON & STEEL SCRAP SPECIFICATIONS Specifications Type of Scrap: # 1 HMS ISRI Code: 200/201/202 ISRI name: No. 1 heavy melting steel Gerdau name: # 1 Heavy Melt Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces prepared in a manner to insure compact charging. Minimum density 55 lbs. per cu. ft. Expected Chemistry (%; max) Dimension (inches; max) Copper 0.300 Chrome 0.150 Nickel 0.150 Tin 0.015 Phosphorous 0.040 Sulphur 0.040 Silicon 0.25 Molybdenum 0.030 Cartersville 48 x 24 x 4 Jackson 12 x 12 x 24 Manitoba 48 x 24 x 4 Monroe 12 x 12 x 24 St. Paul 60 x 18 x 4 Whitby 48 x 24 x 4 Wilton 60 x 18 x
Hallo Good day we can supply Iron Scrap HMS 1 & 2 Origin - Japan Quantity 20 to 100K per month Interested importers kindly contact Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to end seller we assure best price and mark up ( conditional )
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Hallo we have ready stock Iron scrap Origin - Philippine Factory Dismantled Scrap Quantity - 8,50,000 MT Buyer can visit site after sign SPA and Provide BCL Payment - LC Interested importers kindly contact NO LONG CHAIN BROKERS PLEASE Direct buyers , Mandates , Intermediaters who knows the end buyer well are welcome first to First come sale MOQ 50k MT Partial shipment acceptable
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;