Non-clog sewage pump Adc 00
Pumps 1. Rotory gear 2. Mud/sweage 3. Dewatering 4. Dairy 5. Coolant Nos
Submersible pumps
Horizontal centrifugal pumps Gringed and zeroed shaft Big rotor Superior quality 60-110
Application : ò Water pumping from lower to upper tank ò Inline application ò Water dewatering at construction site residential & commercial basements ò Industrial pits Constructional features : ò Dynamically balanced Rotor & Impeller ò Silent working ò Long Bearing life ò Hi pressure resistant mechanical seal ò High quality submersible winding wire ò Oil filled motor Special features : ò Wide Voltage Range. ò Available Both in Single / Three Phase. ò Easily Rewoundable At Site. ò Non Over Loading & Flatter Efficiency Curve. ò Compact, Lightweight & Portable
The Sump Pump incorporates outstanding features of previous designs com¡ bined with improvements resulting from years of experience in the manu¡facture and servicing of this type of unit. The rugged construction includes extra heavy shaft and fully supported alloy bronze bearing resulting in long life and trouble free operation. Replacement parts are readily available from stock and field servicing is easily undertaken. Compactness of design makes this unit ideally suited for drainage of basements, tunnels, boiler rooms, etc ....
Salient features : ò easy installation. ò pump out more water due to its unique design. ò suitable for seawater and passing of solids. ò can be modified easily for higher heads and capacity. ò difficult for pilferage. Applications : ò aqua culture farming. ò ideally suitable for petty and para. ò mass transfer of water from ponds, rivers, sumps, lakes and wimming pools.
(Singlephase/Threephase) DARLING pumps have also developed little Jumbo pumps with smaller H.P. rating in the range of 0.75,1.0,1 !& & 2 H.P. While the constructional features and design of the little pump is similar to the Jumbo pumps. The little Jumbo pumps are powered with single phase as well as threephase electric supply. The little Jumbo pump is fitted with a sealed, leak-proof single phase or threephase motor. It also has a water jacket through which the water rushes towards the discharge. The motor in little Jumbo pump is also filled with oil for lubrication and also for cooling of bearings & mechanical Seal.
Salient features : ò high discharge low head pump. ò in built dry running protection. ò no need of foundation, suction pump, foot valve & pump house. ò compact in size, light in weight. ò life long lubrication arrangement. ò noiseless, leakproof and instant pumping. ò easy installation. ò no attender is required. ò simple in construction, easy for maintenance. ò easy installation. Applications : ò agriculture farming. ò most ideal for fountains and waterfalls. ò industrial pumping. ò river water pumping. ò dewatering applications. ò aqua culture farming.
Submersible pumps As per product varies
Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical Seal Low power Consumption Light in Weight-Portable Compact mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Cast Iron Impeller Internally mounted mechanical seal Low power Consumption Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Stainless Steel body Carbon Bearing Bushes Stainless Steel thrust ring Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 35¦ C The cooling media temperature should not be more than 40¦ C Motor 2-Pole, Single phase, 50 Hz, 220-240 V Insulation Class B Protection IP 57
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class b Protection ip 51
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Capacitor inside/outside the terminal box Insulation class b Protection ip 51
Structural characteristics Unique motor design (capacitor start and run type) Gun metal / cast iron impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
Structural characteristics Unique motor design (capacitor start and run type) Cast iron impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Stainless steel body Carbon bearing bushes Stainless steel thrust ring Operating conditions Clean water not containing abrasive particles Liquid temperature up to 35ª c The cooling media temperature should not be more than 40ª c Motor 2-pole, single phase, 50 hz, 220-240 v Insulation class b Protection ip 57
Structural characteristics Unique motor design (permanent split capacitor type) Gun metal impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Glass fill nylon nozzle and venturi Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
