Structural characteristics
Unique motor design (capacitor start and run type)
Forged brass impeller
Internally mounted mechanical seal
Low power consumption
Light in weight-portable
Compact mechanical design
Better aesthetics and finish
Operating conditions
Clean water not containing abrasive particles
Liquid temperature up to 60ª c
Ambient temperature up to 40ª c
Total suction lift up to 6 meters
Motor
2-pole, single phase, 50 hz, 220-240 v with thermal protector
Capacitor inside/outside the terminal box
Capacitor inside/outside the terminal box
Insulation class b
Protection ip 51
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Capacitor inside/outside the terminal box Insulation class b Protection ip 51
Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical Seal Low power Consumption Light in Weight-Portable Compact mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Structural characteristics Unique motor design (capacitor start and run type) Gun metal / cast iron impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Cast Iron Impeller Internally mounted mechanical seal Low power Consumption Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Stainless Steel body Carbon Bearing Bushes Stainless Steel thrust ring Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 35¦ C The cooling media temperature should not be more than 40¦ C Motor 2-Pole, Single phase, 50 Hz, 220-240 V Insulation Class B Protection IP 57
