Horizontal Centrifugal Pumps

M/AH/HH SREIES are designed for handling highly abrasive,high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost.

Shinjo Valves-Horizontal Single-stage Single Suction Centrifugal Pump ISW - Clear water pupms; ISWR - Hot water pumps; ISWH - Stainless steel pumps; YGW - Oil pumps; D - Pumps with low rotation speed Outlet15 - 300 Diameter Flow Rate (Q)1.5 - 1,080 (m3/h) Lift Head (H) 8 - 150 (m) Power 0.18 - 160 (kw) Consumption Features and Applications These models integrate a horizontal single-stage, single suction, centrifugal pump with a motor to make products simpler in structure, small in size, less noisy, more efficient, easy to maintain, and with a longer life expectancy. The Series ISW pumps are designed for industrial and municipal water / sewage systems, high building water supply and long distance water transfer when the media temperature is below 85. The Series ISWH are hot water pumps, which may operate at temperature below 120, suitable for forced circulation systems of hot water in metallurgical, textile, chemical, wood and paper industries as well as in hotels and residential buildings. The Series ISWH pumps are used for transporting particle-free and corrosive liquids with water-like viscosity at temperature between -20 - 120. They are widely used in petrochemical, metallurgical, electric power, paper and pulp, food and pharmaceutical, and synthetic fiber industries. The Series YGW products are oil pumps for carrying petroleum products at temperature between -20 - 120. The Series D pumps meet the requirement for a low noisy working condition.

Description Horizontal slurry pump range offer to use in mining, chemical, and industrial applications widely. The pump is designed for heavy duty applications such as mill discharge, process plant, and tailings, high pressure pipelines, as well as other specialty applications. The pump provides excellent wear life while maintaining high efficiency during its wear cycle. It helps the new building plant to start production and recover their cost in a short time with the minimum investment. Not only our own brand slurry pumps but also it could be interchangeable with other brands on spares and whole pumps. We have stock on some regular spares. It saves the users' cost on stock and increases their supply chain's efficiency. Key Features Bearing assembly - The large diameter shaft with famous brand bearings contributes to long working life.  Liners-Easy to replace and maintain. Hard metal liners are completely interchangeable with rubber or PU. Casing-Cast iron or ductile iron casing provide high operating pressure capabilities and extra protection on the safety. Impeller-Hard metal and moulded elastomer impellers are completely interchangeable with each other. High efficiency and high head designs are also available. And the arge particle is easy to pass through. FAQ: 1. Are your pump and spares interchangeable with other brands? Yes. 100% interchangeable, whatever the material, working life and working efficiency. 2. What price of your pump and spares? Our price is 30~50% of the original but the same working life. 3. What is your lead time? Some popular spares are in stock which could deliver within 5 days after your PO. If without stock, we could deliver within 3 weeks. 4. What is your warranty? One year for the whole pump except the wear parts. The working life of wet parts is the same as the most famous brand. 5. Do you have OEM service? Yes. We offer OEM service to our clients. And our engineers could train the users on site how to start, use and maintain the pumps.

Slurry pumps Range (discharge):1-18inch 2. Capacity: 10-5400 m3/h ¡¡3. Head: 5-125m ¡¡4. Impeller type: non-clog (open &close) 5. Shaft sealing: packing/gland packing & mechanical ¡¡6. Wet parts material: a05, a07, rubber, 3) slurry pump general features: 1. Xiyue brand xh/xhh slurry pumps are heavy duty pumps. They are cantilevered, horizontal, Centrifugal slurry pumps. Especially they are designed for most difficult pumping applications. 2. Xiyue xhh models are designed for heavy duty applications require high head per stage at high pressures. It is suitable for long distance transporting or where others require more than one pump in series. ¡¡3. Xiyue xh models display total interchangeability between hard metal and ¡¡¡¡elastomeric liner pumps. 4. They are mainly used in: power plant, chemical process, coal, heavy minerals, paper and pulp, mill discharge, lime grinding, bottom boiler fly, ash cyclone feed, slag granulation, suction hopper dredging, barge loading, sand reclamation ect. ¡¡¡¡¡¡ 4) slurry pump structure features: 1. Xiyue xh/xhh pumps are single stage, single suction, and overhang shaft, centrifugal, ¡¡¡¡double-casing horizontal type. Wet parts are made of abrasive resistant hard metal or rubber. ¡¡2. Bearing assembly use cylindrical structure, adjusting the space between impeller and ¡¡¡¡front liner easily, being removed completely when being repaired. ¡¡3. Bearing assembly uses grease lubrication. ¡¡4. The shaft seal could use the packing seal, expeller seal and mechanical seal. ¡¡5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented ¡¡¡¡to any eight positions to suit installations and applications. ¡¡¡¡ Material construction Pump body: cast iron/grey iron Wooden box

3/2C-AH Slurry Pump is a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry pumps offer unmatched power consumption, long component life, and unmatched reliability. Tobee�® 3/2 C AH Slurry Pumps Performance Parameters: Size: 3" x 2" Capacity: 39.6-86.4m3/h Head: 12-64m Speed: 1300-2700rpm NPSHr: 4-6m Eff.: 55% Power: Max.30kw Handling solids: 25mm Seal arrangement: Packing seal, Expeller seal, Mechanical seal

3/2C-AH Slurry Pump is a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry pumps offer unmatched power consumption, long component life, and unmatched reliability. Tobee�® 3/2 C AH Slurry Pumps Performance Parameters: Size: 3" x 2" Capacity: 39.6-86.4m3/h Head: 12-64m Speed: 1300-2700rpm NPSHr: 4-6m Eff.: 55% Power: Max.30kw Handling solids: 25mm Seal arrangement: Packing seal, Expeller seal, Mechanical seal

Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.

Pump Size :- 25 to 150mm Capacity :- up to 660 m3hr. Head :- up to 160 m Discharge press :- up to 16 bar Temperature :- 30 to 1400C Speed :- up to 2900 rpm

General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range  Capacity 95~9000m3/h Head 6~205m Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150 Speed 740~2970r/min Inlet diameter 125~900mm  Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types   4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations