Semi hardwood Okuma face back 17mm thickness
Magnus film faced shut tering plywood is manufactured with high density timber in ultra modern hot presses. Since it is manufactured with CPGL technology, thus it has extra strength than ordinary film face ply. For structurally strong and better bonding it is treated differently while manufacturing. Magnus film face shuttering ply is widely known for the maximum repetitions it gives. Users find it a very useful & economical product worth their investment. TECHNICAL SPECIFICATIONS (IS:4990:1993) Dimension BIS Requirement Observation Values 1 Length 2440 + 6 2442mm 2. Width 1220 + 3 1222mm 3. Thickness 12mm ± 5% 11.90mm 4. Squareness 2mm/1000 mm 0.95mm 5. Edge straightness 2mm/1000mm 0.50mm Physical properties 6. Density 0.95 0.95 7. Moisture contents 5 - 15% 7.50% 8. Adhesion of plies (in dry state) Some adherent fibre distributed Satis factory more or less uniformly 9. Adhesion of plies (in wet state) do Satisfactory 10. Glue shear strength (in dry state) vg. 1350N 1520N Ind.  1100N 1190N 11. Glue shear strength (in wet state) vg.  1000N 1260N Ind.  800N 900N 2 2 12. Tensile strength Along the grain 480kg./cm 525kg./cm 2 2 Across the grain 340kg./cm 370kg./cm 2 2 Total 820kg./cm 895kg./cm 13. Static bending strength 2 2 along the grain M.O.E.A vg.  7500N/mm 8420N/mm 2 2 ind.  6700N/mm 6975/mm 2 2 Across the grain M.O.E.Avg. 4000N/mm 4800N/mm 2 2 Ind. 3600N/mm 4000N/mm2 Along the grain M.O.R.Avg.50 68N/mm 2 Ind.  45 50N/mm 2 Across the grain M.O.R. Avg. 30 47N/mm 2 Ind. 27 31N/mm 3 3 14. Retention of preservative (ACC) 12 kg/m 12.95 kg/gm 15. My cological test (a) Visual inspection (a) Show no separation sign (b) Glue shear strength Avg. 1000 N 1260 N Adhesion of plies Ind. 800 N 910 Adherent fibre distributed Satisfactory Special features of Magnus film faced shuttering plywood are: Magnus film faced shuttering plywood is most effective in RCC constructions. It has a smooth mirror like superior finishing on both surfaces. It saves up to 45% of cost compared to other similar products due to more repetition during shuttering work. Its cross laminated structure between face veneer, core veneer and the film again enhances the strength of ply. After using it as shuttering plywood for many times, it can be re�used for paneling, roofing, flooring, partitions etc.
Magnus futuristic LVL is an engineered wood product, manufactured by compressing multiple layers of thin wood. These are much less likely than conventional lumber to warp, twist, bow, or shrink due to its composite nature. Being highly stable dimensionally, these products are used for headers, beams, and edge Âforming material. NowaÂdays, door and window frames where wood was used, is also replaced by LVL. Application : Shuttering, supports,beams, header, edge forming door frame, window frames, construction with wood. Size : 2440, 2745, 3050 and 3200 mm Thicknesses : 25, 37.5, 50, 75, 62.5, 100, 150, 200 mm 3 Density : 0.65 to 1.20 gm/cm
Magnus HBEAMS are designed and fabricated as per international standards. It is manufactured in such a way that it can bear heavy loads. HÃ? BEAMS are engineere wooden product which consists two flanges and one web beam. Flanges are purely light weight with high strength whereas web beams are made up of plywood or sandwich wood. Applications : H Beams are used where require heavy load such as ceilings, walls, bridges, tunnels, platforms, structure, shuttering, platforms, formworks, columns etc Sizes (Length) : 1200, 1800, 2450, 2750, 3050, 3200, 3650, 3950, 4270, 4570, 4600, 4880, 6100 mm Advantages : Chamfered corners, multi repetitions, high load bearing capacity, standard shape as per international norms, corners covered withplastic caps etc.
Magnus chequered plywood is one of the best transportation purpose plywood. The ply has a chequered pattern on its surface. Because of high pressure, the panel develops high density that can sustain high traffic on flooring in public & industrial use Application: This is an antis kid plywood which is useful in flooring specially in heavy vehicles and large containers. It is useful in automobile sector for ceiling, paneling, seat back rest etc. Thicknesses : 12, 15, 19 & 25 mm Weight : 33 & 36 Kg in 12 mm, 38 & 44 Kg in 15 mm Sizes : 5.5 x 2.5 feet to 10.5 x 5.5 feet
Magnus chemical grade plywood is made by thin layered veneers of wood. The species of wood is used to produce this plywood are selected, high densities, oil and decay free, matured and high strength. It has got excellent resistance to moisture, concentrated acids and alkalies, climate vagaries, wear and tear etc. It is a unique and versatile engineering material. Magnus compregs are wood based synthetic resin laminates panel finds extensive application in industries where mechanical strength and resistance to moisture and chemical degradation are required. APPLICATIONS: Magnus Compreg Plywood For Chemical Industry are extensively used by various chemical industries like Fertilizer, Solvent Extraction, Zinc Plants, Vanaspati Plants, Pharmaceuticals Refineries, Synthetic Resin Plants etc. Thickness Available : 4 Mm To 100 Mm (depending Upon Customer's Requirement). Sizes Available : 3 Length (in Mm): 600 To 3200 Width (in Mm): 300 To 1675 �?¢ Density (in Mm): 1.25 To 1.4 Gm/cm
FIRE RETARDANT PLY FOR PREÂFABRICATED HOUSES AND BUILDINGS Magnus plywood for prefabricated houses is the high strength and all weather vagaries resistant plywood. It is made by hardwood species with single core veneer and using BWP grade E1 (Emission Level) standard adhesive for its internal bonding. It is suitable to human health due to free from formaldehyde emission. All the veneers are processed by jet type hot air dryers for its moisture equalization and uniform properties. This plywood is double pressed by cold and heating medium for high mechanical strength. APPLICATIONS: Useful for Prefabricated houses structural materials like roofs, walls, racks, slabs, floorings, partitions, false ceilings, storage spaces etc. THICKNESS AVAILABLE (IN MM): 3,6, 9, 12, 16, 19, & 25 3 Sizes Available: Length In Mm: 1220 To 3200 Width In Mm: 300 To 1675 Density : 0.65 To 0.75 Gm/cm
Our Specially created Fire Retardant Plywood delays temperature rise, reduce the evaporation of gases, prevent the oxygen content and flame spread. Fire Retardant Plywood can be used in places where there are chances of catching fire like kitchens, restaurants. Applications: container, buses, trucks, railway, hotels multistoried buildings, offices, shopping mall, cinema hall, pantry cars, kitchen etc. Fire Retardant Treatment : type 1 & type 2 Size : 5.5x2.5 to 10.5x5.5 feet Thickness : 4,6,9,12,18,25 mm 3 Density : 0.65 to 1.20 gm/cm TECHNICAL SPECIFICATIONS (IS:5509:2000) Dimensions BIS Requirements Observation Values 1. Length 2440 + 6 2442mm 0 2. Width 1220 + 3 1222mm 0 3. Thickness 12mm �± 5% 11.80mm 4. Squareness 2mm/1000mm 0.95mm 5. Edge straightness 2mm/1000mm 0.50mm 6. Workmanship & finish As per clause 9.1 to 9.2 Satisfactory Physical properties 3 7. Density 0.60 - 0.65gm/cm 0.64gm/cm 8. Moisture contents 5 - 20% 10.25% 9. Water resistance test Pass standard Excellent Cyclic test :8 hours - 16 hours Boiling : drying 3 Cycles : 10. Mycological Test Pass standard Excellent 11. Static bending strength 2 Along the grain M.O.E. Avg. 5000N/mm 5850 N/mm 2 2 Ind. 4500N/mm 4020 N/mm 2 2 Across the grain M.O.E. Avg. 2500N/mm 3480 N/mm 2 2 Ind. 2200N/mm 2855 N/mm 2 Along the grain M.O.R. Avg. 40 47.80N/mm2 Ind. 36 36.40N/mm2 Across the grain M.O.R. Avg. 20 27.25N/mm2 Ind. 18 20.35N/mm FIRE RETARDANT TESTS IS : 5509 : 2000 12. Flammability 30 Min. 35 Min. 13. Flame penetration 30 Min. 33 Min. 14 Rate of burning 20 Min. 28 Min. (Wt. loss 30 to 70%)
Magnus marine plywood is specially treated plywood that is designed to resist rotting in a high moisture environment. It is manufactured with utm ost care in the supervision of technical experts with well selected pieces of core and face veneers. Further, the finished plywood is subjected to proper chemical treatment with waterÂsoluble fixed type preservatives undervacuum pressure to ensure protection against wood destroying organism and to make the product insects, borer, termites and fungi free. Applications: Extensively used in making of furniture, partitions, racks/shelves, shut ters, under layer for decorative laminates etc. Size (In feet) : 6x3, 7x3, 8x3, 6x4, 7x4, 8x4, 7x5, 8x5 Thickness: 4, 6, 8, 12, 15, 18, 25 mm
Magnus calibrated plywood is manufactured for those who are passionate about the perfection in their work. It is manufactured by two way pressing system. Assembled core veneers are pressed in hydraulic hot press and then sanded in imported calibrated machine where uneven thickness of core veneer, from 0.5 mm to 0.1 mm becomes flat after sanding. After getting a uniform size panel, it is laminated with Gurjan face veneer and again sanded with wide belt sander to get the perfect finish. Magnus calibrated plywood is ideal for the lamination of mica. In high profile offices or home it provides the perfect finish after paneling. Magnus calibrated plywood can also be used for shuttering work as its equal thickness makes shutter work easy.
Magnus ply is available in boiling water resistant (BWR) grades. This grade is used for the interior and exterior woodworking application. BWR grade plywood is manufactured with phenol formaldehyde resin. Application: Magnus next gen plywood is widely used for the woodworking, furniture making, homes, offices, business centers, hotels etc. Sizes (in feet) : 6x3, 6x4, 7x3, 7x4, 8x3, 8x4 Thicknesses: 6, 12, 18 mm
Century Plywood Kit Plywood Doors Laminates
Natural Essential Oil
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof. Core Veneer : :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer : :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
End fitment plywood is widely used by the BOPP or other specialty film manufacturers for packing their film rolls. Since film rolls are very expensive it needs immense care and very good quality packing material and used. We understand and value the customer need and always ensure quality of the end fitment plywood. Core Veneer :High Density Plantation Wood (Rubber Wood) : Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing)/ Pine Glue : Melamine Urea Formaldehyde (Moisture resistant) Grade : MR (Moisture Resistant) Grade Thickness in mm :12 to 24MM Size in mm : 485 x 485, 500 x 500, 610 x 610, 630 x 630, 650 x 650, 715 x 715, 700 x 750, :700 x 700, 750 x 750, 800 x 850, 1000 x 1000 etc. Application : Packing film rolls
Mat Plywood Hard Wood
Overlay Plywood
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
