Magnus HBEAMS are designed and fabricated as per international standards. It is manufactured in such a way that it can bear heavy loads. HÃ? BEAMS are engineere wooden product which consists two flanges and one web beam. Flanges are purely light weight with high strength whereas web beams are made up of plywood or sandwich wood.
Applications : H Beams are used where require heavy load such as ceilings,
walls, bridges, tunnels, platforms, structure, shuttering,
platforms, formworks, columns etc
Sizes (Length) : 1200, 1800, 2450, 2750, 3050, 3200, 3650, 3950, 4270, 4570,
4600, 4880, 6100 mm
Advantages : Chamfered corners, multi repetitions, high load bearing
capacity, standard shape as per international norms, corners
covered withplastic caps etc.
Film faced plywood Moisture (8-12%) & densityproducts Weight(kg/m3) Birch About 690 Combined About 600 Poplar About 500 Conserve and maintain: How to cut the best from our film faced plywood Storage Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly. Sealing of edges Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint. Sealing of holes Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes. Cleaning and repair To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete
Supplier: Building materials, film faced plywood, ordinary commercial plywood, h beam/i beam, yellow film faced plywood
plywood for furnture
MDF 100% pine, no tree skin, light yellow color, E0 / E1 glue
Size: 1220x2440mm, 1525x2440mm, 1810x2440mm Thickness:4mm5mm,6mm,7mm,8mm,9mm,10mm,12mm,15mm,16mm,18mm, 21mm,25mm,28mm,30 mm,35 mm,40mm Glue: MR glue (E0 / E1 as per preference) HMR green color available. Advantage: heat-resistant, moisture-resistant, and environment-friendly.
Sizes: 2440x1220, 2500x1250 mm . Thickness: 8, 9, 12, 15, 18, 20, 21, 24, 27,30 mm. Tolerance : Length (width) +/- 2 mm, thickness +/-05mm glue: WBP, MR. Surface Film: Brown Film 120g/sq. Black Film 240g/sq. Smooth or Anti-Slip surface. Face/Back & Core. All pine core All poplar. core All birch. core All hardwood. core Combination Twin - one birch veneer on each side and softwood inner plies Edge: Protected with Water-Resistant Paint. Humidity: max 10 %.
Commercial & industrial plywood. 1) Face/back: pine,okoume , meranti, Bintangor 2) Core: pine, hardwood, poplar, 3) Size: 1220 x2440mm, 1250 x2500mm 4) Thickness: from 3 - 30mm, 5) Glue: MR, WBP, E2, 6) Grade: BB/CC. 7) Application: furniture, room decorations and exterior use
Melamine faced MDF Different wood color available 2440x1220x9/12/15/18/21/25mm Melamine faced Chipboard 2440x1220x9/12/15/18/21/25mm 1525x2440x9/12/15/18/21/25mm 1830x2440x9/12/15/18/21/25mm MR E0/E1/E2 glue Advantage: heat-resistant, moisture-resistant, and environment-friendly.
Supplier: 3 ply shuttering panel, film faced plywood, H20 beam, formwork beam, h beam, doka beam, yellow panel, shuttering panel, plywoods, shuttering plywood
