Description SAFFRO MELLOW COATINGS & RESINS MELLOWTEX RUSTIC/DHOLPURI/BUBBELS is a textured finish composed of high quality durable acrylic modified resin specially designed as an intermediate coating. RUSTIC imparts a super premium look to the walls. BENIFITS :- Hides Fine Cracks It hides surface undulations and fine cracks. Tough Textured The tough texture finish lasts for long and ensures low maintenance. Plaster Protection It increases the life of plaster by protecting it from wind driven rain. UV Resistance It has excellent UV resistance and adhesion. Anti-algal Formula It resists fungal and algal growth when applied as system, with the recommended top coat. Technical Information :- Drying time: Surface dry time 30 - 60 min. Flash point IS101/1987 Part 1, Sec 6: NA. Coverage :- Pre-painting Steps Plaster New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces. Cleaning Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Saffroâ??s Exterior Primer. How To Apply :- On normal masonary surface by a trowel spatula to obtain an even coating of 1 to 1.5 mm ,2 coats 2 to 2.5 sq.ft/kg** (**Actual coverage may very from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.) Filling For Holes & Dents :- In case of dents and holes use Saffro Mellow Coatings & Resins SUMO Acrylic Wall Putty or white cement and fine sand in the ratio 1:3. Saffro Mellow Coatings & Resins,MELLOW TEX RUSTIC should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Two component air drying Epoxy based clear primer with Polyamide as curing agent. Recommended Use :- This product is recommended as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system. Physical Data :- COLOUR : Clear FINISH : Smooth & Glossy SOLIDS BY VOLUME : 50 �± 3% THEORETICAL SPREADING RATE : 20 sq.mt. / ltr. at a recommended DFT of 25 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Thorough surface preparation is vital. For best results, saffro recommends mechanical preparation techniques (Eg. mechanical scarifying, grit or sand sweeping), a) New Concrete Surface :- New concrete surface should be at least 28 days old and/or have moisture content of less than 5% before proceeding with primer application. Laitance and deposits on new concrete are best removed by light grit blasting, mechanical scarification or grinding. Acid etching may be considered for smaller areas, after etching the floor, it should be thoroughly washed with clean water, and then allowed to dry. b) Old Concrete Floors :- Mechanical cleaning methods are strongly recommended on old concrete surfaces, particularly their heavy contamination by oil and grease has occurred or old coatings is present. To ensure good adhesion, all contaminants are removed and the surface thoroughly cleaned of all dust and loose debris. A thorough detergent wash is also recommended followed by thorough cleaning with water and moping it off to a dry state.
Product Category- Paint & Primers Product Name- Endura Description of the product- Premium acrylic exterior paint Area of Use (Application)- Interior and exterior walls Category (For Painters, Carpenters, etc.)- Painters USP of the product- 1. Water based 2. High antifungal property 3. Durable and tough coating" Area of application- Interior & Exterior
Product Category- Plaster Putty & Texturs Product Name- Wall Master Description of the product- White cement based for superior wall finish Area of Use (Application)- Walls and ceiling Category (For Painters, Carpenters, etc.)- Painters USP of the product- 1. Economical grade cement based putty 2. Excellent whiteness Area of application- Interior
Product Category- Tiling Products Product Name- Colour Tilewala Description of the product- Used for tile Joints Area of Use (Application)- All indoor and outdoor tiling joints Category (For Painters, Carpenters, etc.)- Contractors USP of the product- 1. Easy to mix with water and forms soft consistency paste which makes it easy to fill the joints 2. Excellent UV resistance and durability enables the product use for exterior application 3. Available in shades Area of application- Joint filler of tiles
Product Category- Paint & Primers Product Name- Maxima Description of the product- High sheen anti dirt acrylic exterior paint Area of Use (Application)- Interior and exterior walls Category (For Painters, Carpenters, etc.)- Painters USP of the product- 1. High sheen level 2. Dirt repellant 3. More durable coating 4. Variety of shades available" Area of application- Interior & Exterior
Product Category- Plaster Putty & Texturs Product Name- Scott Wall Putty Description of the product- White cement based for superior wall finish Area of Use (Application)- Walls and ceiling Category (For Painters, Carpenters, etc.)- Painters USP of the product- Improves paint coverage and sheen level Area of application- Interior & Exterior
Product Category- Plaster Putty & Texturs Product Name- Tuff Stuff Description of the product- Acrylic based texture finish permitting various interesting texture finishes to be created on masonry surface with a touch of class Area of Use (Application)- All interior and exterior building surfaces Category (For Painters, Carpenters, etc.)- Painters USP of the product- 1. Technologically advance, specially formulated from 100% acrylic co polymet/quartz/minerals and additives provides a flexible, breathable water repellant decorative texture with built in long life and durability to enhance and beautify 2. Tuff stuff texture coats bonds/adhere perfectly to substrate and are strong enough to withstand abrasion and extreme temperatures, acid UV and fungus growth. 3. Seals hairline cracks hence prevents water seepage Area of application- Exterior
The product can be used on all kind of concrete walls to give the coating it is a multipurpose primer can be used in exterior and also interior of the walls. It comes in a packing size of 10 liters and 20 liters air tight buckets.
Water Base Paints, Industrial Paints Like Epoxy Paint, Pu Paints, Primers etc.
epoxy flooring paints services
Floor Paint And Primer Paint Interior And Exterior And Exterior Paint, Summer Cool Paint, Waterproof Paint All Types Paints .
Epoxy and polyurethane paint and ancilleries for industrial and automotive usages products are pu primer, epoxy primer, epoxy finish, pu finish matt and glossy solid colours, pu lacquers, pu thinners, epoxy putty.After sales technical services as and when required
Cement paint.
Polyester resin, alkyds, synthetic enamels, stoving enamels, primers, putty.
Industrial paint, wood finish paint, decorative and emulsion paint.
Paint, industrial paint, decorative paint, epoxy paint, nc paint, cement paint, pu paint, hest resistance paint universal stunners, auto paint.
Skim coats (white cement based wall putty), water thinnable and acrylic distemper.
Texture paint and wall putty.
Paint, primer and thinner.
