Description
SAFFRO MELLOW COATINGS & RESINS MELLOWTEX RUSTIC/DHOLPURI/BUBBELS is a textured finish composed of high quality durable acrylic modified resin specially designed as an intermediate coating. RUSTIC imparts a super premium look to the walls.
BENIFITS :-
Hides Fine Cracks
It hides surface undulations and fine cracks.
Tough Textured
The tough texture finish lasts for long and ensures low maintenance.
Plaster Protection
It increases the life of plaster by protecting it from wind driven rain.
UV Resistance
It has excellent UV resistance and adhesion.
Anti-algal Formula
It resists fungal and algal growth when applied as system, with the recommended top coat.
Technical Information :-
Drying time: Surface dry time 30 - 60 min.
Flash point IS101/1987 Part 1, Sec 6: NA.
Coverage :-
Pre-painting Steps
Plaster New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
Cleaning
Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Saffroâ??s Exterior Primer.
How To Apply :-
On normal masonary surface by a trowel spatula to obtain an even coating of 1 to 1.5 mm ,2 coats 2 to 2.5 sq.ft/kg**
(**Actual coverage may very from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.)
Filling For Holes & Dents :-
In case of dents and holes use Saffro Mellow Coatings & Resins SUMO Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.
Saffro Mellow Coatings & Resins,MELLOW TEX RUSTIC should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
GULF TEX Gulf tex heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition. PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % ± 3 % Specific gravity: 1.70 ± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME : AT 25 To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
TEX PRIMER WHITE Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints PROPERTIES Colour : White Solids: 45% +/- 2% Theoretical Coverage 9 -10 m2 Recommended film thickness: dry 30u wet 80u DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: Min. 5 hours Vehicle type: acrylic co-polymer Specific gravity: 1.55
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
MICRO TEX Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured, PROPERTIES Colour : As per shade card Finish : Light texture finish Consistency: Thixotropic Solids: 50 % +/- 2 % Specific gravity: 1.55 Theoretical Coverage 2.5 â??3.5 m 2/ ltr DRYING TIME : AT 25 �° To handle: 3-4 hours To Recoat: overnight Number of coats: 1 -2 Application by: Roller or brush Description Review It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface. APPLICATIONS: Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces. SURFACE PREPARATION: Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence PRECAUTIONS: Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Metal drums one US gallon, 5 US gallons
