HMS 1&2 Scrap, Used Rail Scrap /Used Rails R50- R65 for sale
HMS 1 / 2 STEEL METAL SCRAP (BULK QUANTITIES)
Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap
we are offering quality range of HMS Scrap (1 & 2) to interested buyers.Our HMS range are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each all product before release by various industrial parameters by our quality analyst.
Giving at moderate Prices and international Export.
We are one of the best supliers of scrap mettallic products here in cameroon we are also supply our products at moderate prices to interteed buyers so intereted buyers should contact us via for more info on our products below are some of our products been supplied by us Billets,Aluminum Billets,Other Billets,Steel Billets,Ingots,Aluminum Ingots,Antimony Ingots,Bismuth Ingots,opper Ingots,antimonial lead ingots,Lead Ingots ,Magnesium Ingots,Manganese Ingots,Silicon Ingots,Steel Ingots,Tin Ingots,Titanium Ingots ,Zinc Ingots,Pig Iron,aluminium scrap,copper scrap etc
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium
iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth
alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal
products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc
ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap,
copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules,
Rubber Scrap, Paper Scrap, etc.
Chemical Composition:
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS 1 / 2 STEEL METAL SCRAP FOR SELL:
Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS 1 / 2 STEEL METAL SCRAP FOR SELL:
Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap
Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate.
We have Used Rails | HMS 1:2
ISRI CODE R50-R65
Composition
C - 0.54-0.82%,
SI - 0.18-0.40%,
MN - 0.60-1.05%,
S - 0.04% maximum
P - 0.035% maximum
AS: - 0.01% Maximum of Mass Share
HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40).
We are yard owners and end sellers of metals and scrap metals
we offer:
Copper cathodes and copper scraps
Aluminium Ingots and aluminium scraps
lead Ingots and scraps
HMS 1/2 scrap,
Moto scraps
Used rails,
battery scrap in large quantity.
Heavy melting steel (HMS) or heavy melting scrap is a designation for recyclable steel and wrought iron. It is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. The Institute of Scrap Recycling Industries breaks up the categories further:[1]
ISRI 200 (HMS 1): Wrought iron or steel scrap 1â??4 inch (6.35 mm) and larger in thickness. All pieces must be smaller than 60 in Ã? 24 in (1,524 mm Ã? 610 mm)
ISRI 201 (HMS 1): Same as ISRI 200 except pieces must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm).
ISRI 202 (HMS 1): Same as ISRI 200 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm).
ISRI 203 (HMS 2): Wrought iron or steel scrap, black and galvanized, 1â??8 inch (3.175 mm) and larger in thickness.
ISRI 204 (HMS 2): Same as ISRI 203 except pieces [1]must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm).
ISRI 205 (HMS 2): Same as ISRI 204 except it may contain automotive scrap except for thin gauge material.
ISRI 206 (HMS 2): Same as ISRI 205 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm).
HMS 1 and 2 are widely traded, particularly in the western hemisphere.
Both HMS 1 and 2 comprise obsolete scrap only - iron and steel recovered from items demolished or dismantled at the end of their life.
Because both grades guarantee a minimum piece thickness â?? at least 1â??4 inch (6.35 mm) for HMS 1, and 1â??8 inch (3.175 mm) for HMS 2 â?? consignments have a high density. Both also have defined maximum dimensions (usually 60 in Ã? 24 in or 1,524 mm Ã? 610 mm), and should be prepared to facilitate handling and charging to a furnace.
This density, sizing and preparation makes for efficient furnace operation by minimising the time to charge enough scrap for a full melt. In contrast, thin mixed scrap greatly increases charging time, cutting furnace productivity.
Variations on maximum piece size are covered by ISRI (North Americaâ??s Institute of Scrap Recycling Industries) codes. HMS is usually traded as a blend of 1 and 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Other major heavy scrap grades include Japanâ??s H2 and A3 from the CIS.[2]
