Fiberglass really is made of glass similar to that in windows or kitchen drinking glasses. To manufacture fiberglass, glass is heated until molten, then forced through superfine holes. This creates glass filaments that are extremely thin so thin, in fact, that they're best measured in microns
E-glass Also Known as Electrical Glass is the
Standard Glass Composition Used for Most Glass
Fibers. It is Made From the Oxides of Silicon,
Aluminum, Calcium, Magnesium, and Boron.woven Roving is a Bidirectional Fabric Made by
Interweaving Direct Roving. Woven Roving is
Compatible With Many Resins, Such as
Polyester, Vinyl Ester and Epocy Resins. Woven
Roving is a High-performance Reinforcement
And Widly Used in Processes Such as in Hand
Lay-up, Molding, and Pultrusion for the
Production of Boats, Automotives Parts,
Furniture, Sport Facilities and Other Frp
Products
306 Fiberglass Products Suppliers
Short on time? Let Fiberglass Products sellers contact you.
The hollow fiber ultrafiltration membrane we offer adopts modified PES as basic raw material. The PES is processed with hydrophilization treatment; our hollow fiber membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~ 100,000 Dalton; our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity
Suitable commercial cartridge with high performance
Higher output flux with low pressure operation
Easy to clean with low cost operation
As a pre-filter which is highly suitable for commercial RO plant
Easy back wash process
Permeate rate is from 100 to 200 LPH
The hollow fiber ultrafiltration membrane we offer adopts modified PVDF as raw material. The PVDF is processed with hydrophilization treatment; our HF membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~100,000 Dalton; Our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity
Good anti-fouling performance, high water flux, stable permeate water production, long service life;
Outside-in filtration or Inside out type is possible, it can stand bad water quality condition
Combined air and water backwash together, high flux recovery rate, so easy to clean
Excellent chemical stability and high antioxidant ability
Low-pressure operation; save electricity and energy. Operation pressure 0.30 MPa
Our HighFlux Aruvi series hollow fiber Cartridges have the following salient features
Membrane Packing - About 50 square meter Membrane Area
Pre-filtration - Suitable Pre-filter for RO; Municipal Water & Industrial Wastewater
Low Pressure - Around 2 bar Pressure Operation
Higher Permeate - up to 1-3 cubic meter Permeate (vary depends on actual conditions)
Backshwash - Easy backwash process and cleaning
We are offering frp epoxy tube. Fiberglass tubes are manufactured to be corrosion resistant, non-conductive, non-magnetic, among other features. They can also be made to be fire retardant.
We offer fiber glass sleeves. we are counted among the leading organizations, engaged in supplying supreme quality fiber glass sleeve. these sleeves are resistant to extreme temperatures, therefore widely demanded by our customers. in order to meet the various requirements of our customers, we offer the fiber glass sleeve in many sizes and colors.
We offer fiber glass unvarnish tape. Woven fiberglass tape is ideal for selective reinforcement of fiberglass laminates, sleeve or pipe winding, seams, and molding.
Sumip luminaries are available in totally enclosed grp housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in chemical, fertilizer, cement, rayon plants, and also industries/power plants located in coastal areas.
Construction
The luminaire housing is hot press molded glass reinforced plastic (grp).
Glass
Wellglass - heat resistance glass is provided with synthetic rubber gasket.
Highbay/ mediumbay - teflon glass with rubber gasket provided.
Retaining frame/ wire guard
Strong stainless steel wire guard is provided to hold & protect the well glass.
Holder
Ceramic es or bc lamp holders are provided as per customer requirement of high grade quality.
Ballast & igniter & capacitor
For integral type luminaries heavy duty copper wound ballast, capacitor & igniter where ever applicable, are fitted right above the lamp holder assembly.
Entries
One no 3/4" bs conduit entry is provided for incoming cable with brass/ polyamide cable gland with check nut.
Hardware
All hardware provided are ss 316.
Suspension
Frp coated eye bolt is provided on top with good quality grommet to absorb the vibration. Alternatively ss 316 clamps can also be provided.
Sumip ladder & perforated type cable tray provides reliable cable support in corrosive application. Both polyester & vinyl ester resin systems are available & all components incorporating u.V. Stabilizer & a surfacing veil to resist corrosive atmosphere.
From power plants to fertilizer industries, paper mills to refineries to laboratories, sound electrical design requires an adaptable cable support system that is reliable. Above all durability & resistance to corrosion lead to lower costs during the life of installation.
Featuring
* corrosion resistance
* strength & durability
* fire redundant
* light weight
* u.V. Stabilities
* long life
Applications
* chemical plants
* power plants
* effluent treatment plants
* offshore platforms
* paper plants
* refineries
Sumip makes grp light poles are constructed of polyester blend resin system & fiberglass rowings with mare than 70% of reinforcing fiberglass in the axial vertical plane which increases desired rigidity & axial strength .
The pole ishaft is manufactured by cnc filament winding procees .
Types of lighting poles :
* burial light poles
* platform light poles
Advantages of grp poles:
* light weight
* non conductive
* corrosion resistant
* low maintenance
* high strength
* aesthetic
* economical
Trefoil clamps are used for high voltage single core cables where the current rating is high & 3 core cables are not available . Sumip trefoil clamps are used for laying single core cables in trefoil touching formation which helps to maintain magnetic symmetry thereby avoiding electromagnetic heating and loss of current .Sumip trefoil clamps have been moulded from glass fibre filled material . Advantage of sumip trefoil clamps
High mechanical strength
Center distance between trefoil clamps can be increased for lower fault level than 50 ka & hence total
Requirements of clamps can be reduced thereby reduction in cost.
Long service life as practically not affected by all chemicals, acids and alkalis.
Design of clamp & good flexural strength gives good grip on cable & accommodates slight deviation in diameter of cable.
