The hollow fiber ultrafiltration membrane we offer adopts modified PVDF as raw material. The PVDF is processed with hydrophilization treatment; our HF membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~100,000 Dalton; Our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity
Good anti-fouling performance, high water flux, stable permeate water production, long service life;
Outside-in filtration or Inside out type is possible, it can stand bad water quality condition
Combined air and water backwash together, high flux recovery rate, so easy to clean
Excellent chemical stability and high antioxidant ability
Low-pressure operation; save electricity and energy. Operation pressure 0.30 MPa
The hollow fiber ultrafiltration membrane we offer adopts modified PES as basic raw material. The PES is processed with hydrophilization treatment; our hollow fiber membrane for ultrafiltration has higher water flux and better antifouling property. MEMFILL has various types of membrane which has different molecular weight cut off (MWCO) up to ~ 100,000 Dalton; our product can be used for the removal of microorganism, colloids, algae and other impurities that may cause turbidity Suitable commercial cartridge with high performance Higher output flux with low pressure operation Easy to clean with low cost operation As a pre-filter which is highly suitable for commercial RO plant Easy back wash process Permeate rate is from 100 to 200 LPH
Our HighFlux Aruvi series hollow fiber Cartridges have the following salient features Membrane Packing - About 50 square meter Membrane Area Pre-filtration - Suitable Pre-filter for RO; Municipal Water & Industrial Wastewater Low Pressure - Around 2 bar Pressure Operation Higher Permeate - up to 1-3 cubic meter Permeate (vary depends on actual conditions) Backshwash - Easy backwash process and cleaning
Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed , laid on a roving matrix then stitched together with organic fibers. Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, rtm, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other frp products. Product properties: 1. Even thickness, high wet tensile strength retention 2. Directional properties and strengths same to woven roving 3.Enough hollows on surface to make it good permeability 4. Flexibility to design variety weaving structures 5. Stable structure required to achieve maximum tensile strength properties. Shrink film packing and sealing and then package them with carton.
