We are offering frp epoxy tube. Fiberglass tubes are manufactured to be corrosion resistant, non-conductive, non-magnetic, among other features. They can also be made to be fire retardant.
FRP-04 Description Epoxy fiber glass tube is high quality material as making high voltage electric devices. Inner diameter(mm): 24 30 33 36 38 42 46 48 50 52 54 55 56 58 60 63 66 74 75 76 78 80 82 100 105 115 130 140 144 180 1851 94 210 240 245 250 253 Other Inside diameter is available. Outer diameter and length can be made by customers specific requirements. Features Non-Corrosive 2. Dimensionally Stable 3. Lower Life Cycle Cost 4. Flame Retardant 5. Easy to Fabricate and Install 6. Electrically Non-Conductive 7. Lightweight/High Strength 8. Resists Insect Damage 9. High Impact Strength 10. Low Water Absorption 11. Greater Flexural Strength Than Timber 12. Non-Leeching Physical,mechanical and dielectric property should follow the table below: Technical requirement Normal Diameter Thickness Length Tolerance Allowed inside diameter outside diameter Length 30~70 3~20 500 ±0.3 ±0.3 ±1 70~150 3~20 1000 ±0.5 ±0.5 ±2 150~550 10~100 2800 ±0.5 ±0.2 ±2 Physical and mechanical parameters Physical and mechanical parameters Index Name Unit Index Index Name Unit Index Density g/cm3> 1.80 Density g/cm3> 1.80 Water absorption % 0.15 Water absorption % 0.15 Intensity of curvature(circling direction) Mpa 400 Intensity of curvature(circling direction) Mpa 400 Intensity of compress Mpa 98 Intensity of compress Mpa 98 Voltage vitality on parallel layer at normal state for 5min Kv 25 Voltage vitality on parallel layer at normal state for 5min Kv 25 Voltage vitalityon vertical layer in the oil at 90C for 5min MV/m 12 Voltage vitalityon vertical layer in the oil at 90Cfor 5min MV/m 12 Enquire Now Epoxy fiber glass tube is made by good quality glass fiber steeped into epoxy resin of thermo-stability, which is high quality material as making high voltage electric devices, such as breakers, thimbles, mutual inductors, zinc oxide arresters, etc.
Supplier: Industrial bushings, epoxy sheets, insulators, frp sheets, epoxy and frp rods and tubes, low voltage transformer bushings, high current seal off bushings, high tension bushings, epoxy circular type seal bushings, isolation contact spout bushings, sleeve bushings, wall through bushings, inter panel seal off bushings
Services: Manufacturer and exporter
Zhejiang Yingtai Insulation Material Co., Ltd. is a manufacturer mainly producing epoxy glass fiber winding pipes. It has a complete set of manufacturing process line equipment and machinery. Our products are all customized products. Various specifications can be customized according to customer requirements. Various types of epoxy glass fiber wound pipe.    Epoxy glass fiber winding pipe is made by uninterrupted fiber wet winding. It is specially developed for high-voltage electrical equipment structural components such as reactors, arresters, fuses, transformers, on-load tap-changers, and transformers. The product performance parameters meet IEC standards Requirements, the product is leading in China. Basic parameters: 1: winding angle, 45 65 (the winding angle can be adjusted according to different requirements to achieve better mechanical performance requirements); 2: fiber content (weight ratio), 70 to 75%; 3: density, 2.00 g / cm3; 4: water absorption, less than 0.03%; 5: Axial thermal expansion coefficient, 1.8 E-05 1 / K; 6: Glass transition temperature, 110 120 ; 7: Chemical resistance Mineral oil: Excellent; 8: solvent and dilute acid: excellent; 9: tensile elastic modulus, 14000 MPa in the axial direction; 10: tensile strength; axial 280 MPa; hoop 600 MPa; 11: Shear strength: 150 MPa; 12: Bending strength: 350 MPa in the axial direction; 13: Compressive strength: 240 MPa in the axial direction; 14: relative dielectric constant 2-3.2; 15: Dielectric loss factor 0.003-0.015; 16: partial discharge â?¤5; 17: Insulation strength: 3 to 6 kV in the axial direction; 10 to 12 kV in the radial direction; 18: Lightning shock: 110 KV 19: Power frequency shock: 50 KV; 20: Heat-resistant grade: B, F, H 21: inner diameter> 5mm; outer diameter
Supplier: Fiberglass Polyster Pigments, Epoxy Pigments, Frp Pigments
Buyer: Organic And Inorganic Pigments
Supplier: Glass tube, epoxy fiberglass tube, glass fiber wound tube, fr4 tube, winding tube, cross winding tube, fiber reinforced winding tube, epoxy tube
Services: Glass tube,epoxy fiberglass tube,glass fiber wound tube,fr4 tube,winding tube,cross winding tube
,fiber reinforced winding tube,epoxy tube
Fiberglass tube/pipe/pole glass fiber rod frp tube Colorful fiberglass tube, 5~800mm fiberglass tube Can be customized, surface can be painted any color if you tell us the ral number. Advantage: 1) long life 2) light weight 3) high strength 4) good flexibility 5) beautiful appearance 6) insulation 7) corrosion resistance 8) good comprehensive benefits.z
Supplier: Fiberglass reinforced plastic, FRP, GRP, FRP gratings, FRP profile, FRP channel, FRP tube, FRP pipe, FRP cable tray, cable trough, GRP pipe, fiberglass plate, fiberglass sheet, fiberglass tank
Electrical insulation FR4 G10 epoxy resin fiberglass rod is made from glass cloth fabric impregnated with epoxy resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications, with good moisture resistance.
Introduction: Basic Materials: Epoxy resin, curing agent and alkali-free glass cloth Specifications: Performance: Good dielectric properties and machinability Temperature Classification: Heat resistance is different according tot he raw material (B/F/H)GB/T 5132.1-2009 IEC61212-1:2006 Application: It can be used as insulation structural components for electrical equipment. Can be made into a dry-type transformer coil insulation tube and transformer insulation end.
