1 switching capability 10 w (max)
2 switching voltage 100 vdc (max)
3 switching current 0.5 amps (max)
4 contact resistance 1 ohms max
5 dielectric :
between terminals 200vdc for 1minute
between body & terminal 500vdc for 1minute
body & cable insulation 500vdc for 1minute
6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01
7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01
8 operating temperature 80 deg c max
9 surface temperature 5 deg c max @ ambient
10 ambient temperature -20 to +50 deg c
x denotes for high temperature (50 deg c )
11 IP rating ip 67.
12 sensor dimension 35x19x10 mm
13 Cable 2 core cable with shield
14 Approvals : CE & Atex.
PE-AOBDV Automatic Oil Breakdown Voltage Testeris a highly precise instrument, which can be applied to measure either the breakdown voltage or also check the withstanding voltage for a predefined time. Usual available automatic test sets only perform the former function, but PE-AOBDV can do both. PE-AOBDV can measure the breakdown voltage repetitively and computes an average reading, for a proper decision making. PE-AOBDV consists of an integrated Oil Cup, HV AC power source.
Features
- 0-80kV or 0-100kV smooth operation, 5mA trip current
- Complete Automatic operation
- Non-contact magnetic stirring
- Programmable Stir, Hold, and Intermediate Stand times
- Programmable voltage ramp rate
- Repetitive test sequence and average readings
- Digital display output
- Integrated thermal Printer
- Internal memory for data storage and recall
- Included IS 6792, IEC 60156 and GB507-86 test sequences
- Programmable test sequences as per requirement.
Electronic control panel for submersible pump for operation of 0.50 hp to 3 hp 1 phase and electrical coustomise panel up to 150 hp in 3 phase. Quality component used in panel for long lastings result and for customer satisfaction
Panels are available in diffrent lot size according to hp wise but 1 box contain min. 20 pcs. Weight n dimension are veries according to product specification
1.Supply voltage: ac, single phase, 230v, 50hz.
2.Power consumption: 20 watts.
3.Stroke: factory set at 900, 1600 or 2700. (field adjustment in steps of 30 is possible).
4.Auxiliary switch (optional): 2.5a, 250v, 50hz, no or nc. (operated at only one fixed point).
5.Feedback potentiometer: 135Ω standard matched to stroke angle of either 900, 1600 or 2700. (the maximum permitted power dissipation is 1w for 900, 1.5w for 1600, & 2w for 2700).
6.Torque-speed capabilities: total gear ratio is adjusted at factory to obtain the following combination of torque and speed.
We are providing micro strip training kits that is assured to have international quality standards. These micro strip trainer kits are known for assisting the student to investigate the principles of micro strip technology. To illustrate the essential principles of this field of study, the high precision bench to system uses up to date micro strip components. These are specially designed to use with basic test equipment such as a dual dc supply and a digital multimeter. We also offer vco and detector along with a calibration curve chart. Further, these systems are also equipped with student manuals and a well designed carrying case.
Latest microwave technology
2.4ghz to 3.4ghz vco
2 to 4 ghz pin diode modulator
No ancillary test equipment required
Safe low power output
Components identified with inscribed reference number
Supplied in protective case
Kit contains:
Power source and detector action
Action of a 3-port circulator
Insertion loss measurement on a low-pass filter
Measurement of return loss, reflection coefficient and vswr of a filter, micro strip and commercial matched loads
Properties of a power divider and rat-race coupler
Effective dielectric consultant/line loss measurement with a ring resonator
Dc biasing and mmic amplifier investigations
Pin diode modulator investigations
Microwave radio link and antenna investigations
We are providing gsm antenna & broad band antenna that is manufactured and designed using latest technology. Our gsm antenna & broad band antenna is highly demanded in the market as it efficiently catches the signal even in low network area and of various frequencies. These gsm external antennas are available in weatherproof industrial grade enclosures. Further, our antennas are appreciated by the clients for highly durability and excellent performance even in extreme environmental conditions. This gsm antenna is available in various sizes and can be customized as per the specifications of the client.
We offer bts antenna that is manufactured and designed using latest technology available. Our antenna is perfectly designed for providing brilliant performance in any magnetic field. Manufactured from the quality raw material, they provide long lasting excellent performance. They have the capability to grasp the signals from various frequencies, even in extreme environmental conditions. Fabricated by our experts in the engineering wing, these antennas conform to the international quality standards.
870-960 mhz
1710 - 2170 mhz
Polarizations
¦ 45¦ slant
¦ 45¦ slant
+û3db horizontal plane
65¦
66¦
+û3dbvertical plane
6.9¦
6.0¦
Gain (dbi)
17.2
17.9
Upper sidelobe level (0¦ to +30¦)
< -18 db
< -18 db
Front to back ratio (180¦¦ 30¦)
> 25 db
> 25 db
Cross polarization level (0¦¦ 30¦)
> 15 db
> 15 db
Isolation
> 30 db
> 30 db
V.S.W.R. (50·)
< 1.5
< 1.5
Intermodulation (2 x 20 w carriers)
< -150 dbc (im3)
< -150 dbc (im3)
< -160 dbc (im7)
Variable tilt
2¦ - 10¦
2¦ - 10¦
Maximum cw input power
500 w
500 w
1) Constant Current Selected automatically depending on
ground conditions
Max. Current 500mA
Min. Current 1mA
2) Voltage (Max) 500 V (1000 Vpp)
3) Power 40W
b. Amplifier
Voltage Measurement
Input Impedance 10 M Ohm
Input Range 0-200V
Precision + 0.05 mV
Noise Rejection 95 dB at 50-60 Hz
c. Resistance Measurement
Apparent R Range m Ohm, Ohm, K Ohm
Apparent R Precision 0.02 m Ohm at 500 mA
d. System Data
Cycle time 12 seconds
Accuracy 2%
Diagnostic display 9 codes
Temp. Range 0 v 50 degree c
e. Power Source 12 Volt, 12 Ah Rechargeable Battery
Measuring capacity 2000 readings at 20 mA
200 readings at 500 mA
f. Weight 12.5 Kg
g. Dimensions L 400mm X W 225mm X H 330mm
Weight 20 kg of instrument Additional Accessaries 60-80 Kg.
Bag filters are used for removal of solids from liquids. Depending on pressure, flow, viscosity, nature of liquid, we can design and manufacture a suitable liquid bag filter. The housing of the filter can be Mild Steel, Stainless Steel, FRVE or any other.i
Salient Features:
* 4 /8/12Lamps
* 1 Fan
* Fan Speed Control
* Fan Speed 7 Segment Display optional
* Inverter supply compatible
* Very rugged/functions perfectly without being effected by noise and other line disturbances.
* Low Cost
* Kits available
* 4 remote options ready
* Any remote can be used (preprogrammed as per requirement)
Our dol starter comes with inbuilt single phase preventor & auto start unit.The multi tester detects the presence of ac voltage by remote sensing without actually touching the live wire
It is available in various capacity i.E. 200 amp, 300 amp, 400 amp, 500 amp, 600 amp, 700 amp, 800 amp. Also it can be customize for bulk need. Clip are available in various models
Sockets are made up of high quality steel with proper heat treatment and industrial finish grade wich improves the life of sockets.
Impact socket, extension sockets, heavy duty socket, special socket, nut runner, stud driver, adaptor, quick change adaptor, bit socket etc.
32529 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
